Milling Machines

Core3D Provides Dental Labs with New Materials and New Products through Advanced Manufacturing Techniques
Milling Machines

Core3D Provides Dental Labs with New Materials and New Products through Advanced Manufacturing Techniques

International firm uses robotic ultrasonics and conventional machine tools to supply product, usually with 24-hour turnaround; achieving near 24-7 unattended operation with over 15 percent reduction in scrap material on very expensive substrates OpenHealth, one of the world's leading providers of business and technical solutions to the dental healthcare industries, was formed by the owners of...

Read More »
Milling Machines

Come See What's New from the Particle Engineering & Process Specialists at Interphex 2011

Quadro Engineering, The Fitzpatrick Company and Microfluidics are teaming up at Interphex 2011 (March 29 - 31) in New York, in booths 3427, 3433 and 2071 respectively, to exhibit cutting-edge solutions to your particle engineering and processing needs. NEW from Quadro is the Ytron HV0-Emulsifier and Wet Mill, a formulation lab-scale machine that provides all the benefits of high velocity (HV)...

Read More »
Milling Machines

Roland Partners with PTC and TechSoft to Demonstrate STEM Solutions at ACTE

Students can use the design software of their choice to design and manufacture products with Roland mills and cutters Irvine, Calif. - At next month's ACTE conference, Roland DGA Corp. (Booth #1013) will demonstrate its line-up of STEM education solutions featuring the company's advanced MDX milling machines and GX cutters, the TechSoft STEM Education Curriculum, and the Scalextric4schools...

Read More »
Milling Machines

Haas Automation Milling Operations Automated with No Fixture Setup Needed Using Machining Cell Equipped with New Double-Acting HDM690 Kurt Hydraulic Vise

Oxnard, California: No one knows precision machining better than Haas Automation. As the largest CNC machine tool builder in the Western World, Haas naturally would implement only the most productive and highest quality processes in its own machining operations. Recently, Haas phased in an automated machining cell using a new model Kurt workholding setup with capacity to increase output by two to...

Read More »
GeniSYS 220CNC: Remarkable Performance, Great Results
Milling Machines

GeniSYS 220CNC: Remarkable Performance, Great Results

GLOBAL bolting and engineering solutions company Hydratight has won new admirers in Asia Pacific for its remarkable 3D mobile milling machine, the GeniSYS 220CNC. Hydratight saved major chemicals and manufacturing company, Huntsman, a considerable amount of time and money by using the computercontrolled, high-accuracy tool to repair a large reactor vessel flange in-situ. Hydratight Singapore was...

Read More »
Floor-Type Horizontal Boring Mill provides full 2 meter reach.
Milling Machines

Floor-Type Horizontal Boring Mill provides full 2 meter reach.

Suited for inside jobs on pump, valve, and wind-turbine bores, Model FTR 3500 is available in column heights of 2-5 m in Â-½ m increments. Traveling column design allows virtually unlimited X-axis travel, while 20 m/min rapid traverse rates minimize cycle times. Collinear ram, made from ductile iron, adds 1 m W-axis reach to spindle's existing 1 m extension. Machine is suited for heavy metal...

Read More »
Continuing a Metso Tradition Metso Will Design and Supply the World's Largest SAG Mill for the Newmont Mining Yanacocha Conga Copper-Gold Project in Peru
Milling Machines

Continuing a Metso Tradition Metso Will Design and Supply the World's Largest SAG Mill for the Newmont Mining Yanacocha Conga Copper-Gold Project in Peru

Metso has been selected to design and supply a 42 ft x 25 ft, (12.8m x 7.6m) 28 MW gearless SAG mill, plus two 26 ft x 42 ft, (7.9m x 12.8m) 15.6 MW ball mills and two VTM-1500-WB VERTIMILLSÂ-® for Newmont Mining Corporation's Yanacocha Conga copper-gold project in Peru. The 42 ft diameter SAG mill is the world's largest and is the first of its kind. The Conga project is at its feasibility...

Read More »
Romaco FrymaKoruma at Emballage 2010
Milling Machines

Romaco FrymaKoruma at Emballage 2010

Innovative vacuum processing and milling Technology Karlsruhe/Germany - The Frymix II vacuum processing unit and the MZ toothed colloid mill will be on show at the forthcoming Emballage 2010 in Paris/France. Efficient processes and the highest possible quality are united in this innovative technology. FrymaKoruma Frymix II vacuum processing unit gets a facelift With its efficient rotor-rotor...

Read More »
Vertical Turning Lathe handles jet engine components.
Milling Machines

Vertical Turning Lathe handles jet engine components.

Based on stiff, cast iron structure with thermo-symmetrical design and integral temperature compensation, Model TVU can be configured with milling and grinding capability, robotic tool exchange, and automatic pallet change. System is available in high-speed configuration with 630-800 rpm table for workpieces up to 3.5 tons, or heavy load configuration with 220-500 rpm table capable of supporting...

Read More »
Five-Axis Dental Mill is operated by Apple iPad.
Milling Machines

Five-Axis Dental Mill is operated by Apple iPad.

DATRON D5 Dental Mill features 5-axis automation system that holds up to 8 material blanks and loads and unloads blanks for unattended operation. Cast iron machine has 7 dynamic servo drives, horizontally-mounted industrial spindle, lubrication system, and dust collection. Also included is 13-station tool changer with tool-length and tool-break sensors. All functions are controlled via Apple iPad...

Read More »

All Topics