Milling Machines

Milling Machines

Composite Trimming Machine combines milling with ultrasonic trimming.

Manufactured in any size with any level of automation, FZ Combined Ultrasonic and Milling Composite Trimming Machine uses combination of processes to increase productivity and flexibility. Ultrasonic blades, up to 3 in. long, and rotational ultrasonic disks offer quick-change ability. Ultrasonic horns have frequencies and amplitudes automatically programmed and controlled by Siemens 840D. There...

Read More »
Milling Machines

Aluminum Milling Machine uses specialized head.

Manufactured to any size and level of automation, FZ Aluminum Milling Machine employs heavy-duty SPL milling head with integrated clutches to clamp axis positions for aluminum and rapid prototyping. Gearless and absolutely rigid torque motor drives C axis; compact, zero backlash Harmonic Drive drives B axis; and linear motor drives for X and Y axes minimize cycle times due to dynamic movements...

Read More »
GF AgieCharmilles Displaying Innovative, Complementary Technologies at IMTS 2010
Milling Machines

GF AgieCharmilles Displaying Innovative, Complementary Technologies at IMTS 2010

Lincolnshire, Illinois, June 14, 2010 - GF AgieCharmilles will be demonstrating a wide variety of complementary EDM, 5-axis milling and automation technologies in its primary booth, S-8754, at IMTS 2010. The company will also man a satellite booth, E-4440, which will focus on GF AgieCharmilles' standard-setting consumables and customer service departments. IMTS 2010 will take place on September...

Read More »
Drill and Tap Machine incorporates milling capability.
Milling Machines

Drill and Tap Machine incorporates milling capability.

Along with 508 x 406 x 394 mm work cube and 660 x 381 mm T-slot table, DT-1 features BT-30 taper spindle that spins to 15,000 rpm and allows tapping at speeds to 5,000 rpm. Standard 11.2 kW vector drive system provides 62 Nm peak torque for milling and boring, while 20-pocket, servo-driven tool changer swaps tools in 0.8 sec. Max cutting feedrate of 30.5 m/min, 61 m/min rapids, and 1 G...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Gantry Milling Machine incorporates linear motors.
Milling Machines

Gantry Milling Machine incorporates linear motors.

Featuring modular design, 5-axis ENDURA® 700Linear is suitable for machining 5 sides of parts made from plastic, composite materials, ureol, and aluminum, as well as for finishing cast and steel materials. Two-axis fork milling head with high frequency milling spindle is mounted on Z-axis lifting beam, which travels across gantry. Providing XYZ axis travels of 2,200 x 2,800 x 1,200 mm,...

Read More »
IMTS Advance News for MAG Industrial Automation Systems
Milling Machines

IMTS Advance News for MAG Industrial Automation Systems

Booth No. W-1546 What was old is new again, and more productive, with CNC retrofit solutions from MAG Pre-engineered retrofit kits available for MAG's legacy brand lathes, HBM's, and milling machines. Fadal retrofit to be exhibited at this year's IMTS. A new CNC retrofit program from MAG allows older equipment to enter a new realm of productivity, often exceeding original specifications, and...

Read More »
Compact CNC Milling Machine targets dental applications.
Milling Machines

Compact CNC Milling Machine targets dental applications.

Designed for creating copings, crowns, and bridges in zirconia and wax, DWX-30 features integrated clamping system and virtual panel. Three types of clamps are included, one for discs and 2 for blocks, while integrated dust collection system removes debris and keeps machine and lab environment clean. Using DWX-30, materials can be cut on top, bottom, and at ±20° for complex geometry....

Read More »
MSC Industrial Direct Co., Inc. to Focus on Cost and Time Savings at IMTS 2010
Milling Machines

MSC Industrial Direct Co., Inc. to Focus on Cost and Time Savings at IMTS 2010

Melville, New York - MSC Industrial Direct Co., Inc., the country's leading supplier of cost down metalworking solutions, will use its booth at IMTS 2010 to demonstrate a variety of products designed to provide manufacturers with cost and time savings. The company will occupy booth W-1464 at the show, which takes place on September 13 - 18 at McCormick Center in Chicago, Illinois. Making their...

Read More »
Milling Machine uses linear direct drive motor technology. .
Milling Machines

Milling Machine uses linear direct drive motor technology. .

Providing 5-axis simultaneous machining, Model HSM 400U LP achieves speeds up to 250 rpm on rotational axis and up to 150 rpm on swivel axis, with B-axis swivel range of 220°. Linear direct drive combines with central oil lubrication to minimize friction-induced wear. Available with 30,000, 42,000, or 54,000 rpm vector spindles, machine can operate unattended using optional pallet changer....

Read More »
Sodick to Feature New Technology at IMTS Booth E-4418
Milling Machines

Sodick to Feature New Technology at IMTS Booth E-4418

Sodick Inc., will be featuring its latest innovative technology at IMTS 2010 in booth E-4418. Sodick's newest cost-friendly, Wire EDMs, the VZ300L and VZ500L will be making their debut at IMTS 2010. The VZ Series is high speed, high precision and features Sodick's linear motor technology. This system employs a direct-drive, frictionless, vibration-free mechanism that has unrivaled acceleration...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics