Dissolved Oxygen Meter features self-stirring probe.

Dissolved Oxygen Meter features self-stirring probe.

Waterproof WTW 340i Series is available in field/lab sets that allow meter to be used for field dissolved oxygen (DO) and lab biological oxygen demand (BOD) measurements. Unit comes with field probe and StirrOx(R) self-stirring BOD probe. Probes can be interchanged and used immediately with no warm-up period required. Meter has automatic calibration, LCD display, real-time clock, RS232 interface,...

Read More »
Turbine Meter offers low flow measurement.

Turbine Meter offers low flow measurement.

C-OH45-A Low Flow Turbine Meter is based on pelton wheel-like rotor and features 316 stainless steel housing and self-lubricating ball bearings. It offers flow measurement for clean, low and moderate viscosity liquids in 12 overlapping ranges from 0.015 to 3.00 gpm, with accuracy of +/-1% (after linearization) over 10:1 flow range. Unit has max pressure rating of 1,000 psi and temperature range...

Read More »
Clamp-On Ammeter is a Category Class III instrument.

Clamp-On Ammeter is a Category Class III instrument.

Hand-held Model 2606 offers measuring ranges of 0 to 1000 amps Ac/Dc, 0 to 1000 Vdc, 0 to 750 Vac (True RMS), resistance from 0 to 40 MOhm, capacitance range of 4 nF to 40 uF, and frequency from 100 Hz to 400 KHz. It also provides Continuity Test and Diode Test. 4000-count instrument, with impact-resistant case and electronic overload protection, is suited for use in field servicing, industrial...

Read More »

Digital Light Meter easily fits in a pocket.

LM631 is 2 1/2 in. wide and under 8 in. long. It accurately measures light in lux as well as ft-candles. Meter includes 3 1/2-digit display and utilizes built-in CIE spectrum curve for accurate human eye response. Peak Hold and Data Hold are standard options. Unit is suitable for verifying plant and office lighting to meet workplace illumination standards and OSHA requirements. Detachable 45 in....

Read More »
Turbine Flowmeter is suitable for OEMs.

Turbine Flowmeter is suitable for OEMs.

Available in 9 overlapping sizes from 1/4 to 2 in., Lo-Co Series is suitable for manufacturers who need to incorporate flowmeters into their equipment. Made of 316 stainless steel, it has NPT end fittings, provides 1% accuracy, and is available with 4-20 mA or conditioned pulse outputs. It is available in explosion proof configuration with indicator/totalizer packages. User applications include...

Read More »
Dissolved Oxygen Meter uses polarigraphic type probe.

Dissolved Oxygen Meter uses polarigraphic type probe.

LCD digital meter is designed to measure dissolved oxygen in field or laboratory with DO accuracy of ±1.5% full scale and temperature accuracy of ±1% full scale. O2 measurement range is 0.00 to 19.00 PPM, and temperature range is 0.0° to 50.0°C. Both are displayed on 3.5 digit LCD readout with 1/2 in. high numerals. Meter includes automatic temperature compensation over range of 0° to 30°C....

Read More »
ph Meter has flat surface electrode and smart chip.

ph Meter has flat surface electrode and smart chip.

ExStik(TM) measures pH in liquids, semi-solids, and solids. Its Smart Chip indicates when electrode needs to be recalibrated or replaced. Measurements range from 0.00 to 14.00 pH with 0.01 pH resolution and accuracy. ExStik also measures temperatures from 23° to 194° F. LCD simultaneously displays pH and temperature readings, and includes analog bar graph. ExStik incorporates 1, 2, or 3 point...

Read More »
Mass Flow Meters offer integral batch control.

Mass Flow Meters offer integral batch control.

FlexCOR(TM) CMF Series features ASIC design and processes multi-parameter information including mass flow, volumetric flow, density, temperature and fraction-flow. Series comes in 5 flow sizes ranging from 1/16 to 2 in. Measuring range can be as low as 0.1 lbs/min with CMF-A to over 1900 lbs/min with CMF-F. Designed with continuous, seamless tube, CMF units withstand pressure loads up to 6760...

Read More »
Combination System provides weight and force measurement.

Combination System provides weight and force measurement.

GS0/DPM-3 System is comprised of GS0 precision gram sensor and DPM-3 panel mount meter. It is suitable for variety of industrial and OEM force measurement and weighing applications. DPM-3 can be scaled to full 5 digits, samples 60 readings per second, provides analog output and features true peak reading capability. GS0 tension and compression sensor is offered in variety of ranges from 10 to...

Read More »
Analyzer provides suspended solids measurements.

Analyzer provides suspended solids measurements.

Model 7110 continuous on-line analyzer measures and controls suspended solids concentration or turbidity. Measurements can be displayed in ppm, mg/l, g/l, %, NTU, or FTU, depending on sensor model being used. Analyzer includes menu-guided operation and user-friendly interface. Series 7500 Sensors use multi-beam optical measurement technique which compensates for sensor fouling and aging of...

Read More »

All Topics