Megohmmeters

Insulation Tester troubleshoots windings and cables.
Megohmmeters

Insulation Tester troubleshoots windings and cables.

Offering handheld portability, Model 61-795 performs routine checking of electrical insulation to spot breakdowns before they result in injury or equipment failure. Tester features CAT IV-600V safety rating, 250/500/1,000 V test voltages, and insulation test range of 0.001-4,000 MW. Additional test functions include AC/DC from 0.1-600 V, resistance from 0-200.0 W, and continuity from 0.01-20.00...

Read More »
Ascentech Provides Product Reliability Testing to Henkel
Megohmmeters

Ascentech Provides Product Reliability Testing to Henkel

February 20, 2008 Ascentech Provides Product Reliability Testing to Henkel Chester, Connecticut, USA - Ascentech, LLC, North American distributor for GEN3 Systems Ltd. products, recently provided Henkel Corporation's Electronics Technology Center in Irvine California, with laboratory equipment for Surface Insulation Resistance testing and for Solderability testing. In announcing the purchase,...

Read More »
Micro-Ohmmeter also gives real-time temperature readings.
Ohmmeters

Micro-Ohmmeter also gives real-time temperature readings.

With 0.1°C resolution and ±0.5°C accuracy, Wahl RM116 Micro-Ohmmeter performs measurements on inductive and non-inductive resistances with dc current. Interactive display informs operator about measurement type, range, calculation conditions, thresholds status, and values. Designed for harsh conditions in hard Pelicase®-type case with plastic washable keyboard and...

Read More »
Insulation Testers offer 5 and 10 kV output.
Megohmmeters

Insulation Testers offer 5 and 10 kV output.

Model S1-552 comes with 5 preprogrammed test voltages including 250, 500, 1,000, 2,500 and 5,000 V, can step up voltage in 10 V increments from 50-1,000 V and in 25 V increments beyond 1,000 V. It includes automatic polarization index, step voltage, dielectric discharge, and dielectric absorption ratio tests. With all capability and features of Model S1-552, Models S1-554 and S1-1054 offer 4 mA...

Read More »
Ground Resistance Tester meets IEC 1010 standards.
Megohmmeters

Ground Resistance Tester meets IEC 1010 standards.

Measuring ground rod and small grid resistance in any season, handheld ERITECH® EST401 clamp-on tester can be used in multi-grounded systems without disconnecting ground under test. Probe enables measurement of current leakage flowing to ground or circulating in ground loops to 1 mA and neutral currents to 30 A(rms). With rugged Lexan® body, product is suited for taking measurements...

Read More »
Insulation/Continuity Testers range from 10-1,000 V.
Megohmmeters

Insulation/Continuity Testers range from 10-1,000 V.

Conforming to IEC1010-2 for Category IV 600 V applications, Series MIT400 features dual digital and analog arc displays showing measurement result and actual test voltage being delivered simultaneously. For low voltage insulation testing, units offer user-selectable 10-100 V in 1 V increments. Insulation resistance measurements range from 20-200 GW, and continuity measurement of 200 mA is...

Read More »
Ground Resistance Tester measures from 0.01-99,000 ohms.
Megohmmeters

Ground Resistance Tester measures from 0.01-99,000 ohms.

Designed to automatically seek out optimum measurement range test current and test frequency, digital Model 6470 performs grounding resistance, earth coupling measurement, soil resistivity, and bonding tests. Adjustable test frequency from 40-513 Hz provides rejection of high levels of interference. Up to 512 test results can be stored in internal memory for later recall to display or downloaded...

Read More »
Insulation Testers have flexible silicone test leads.
Megohmmeters

Insulation Testers have flexible silicone test leads.

Designed to read measurements in harsh environments, SEW 4103 IN and 4104 IN meters have built-in and integral guard circuitry to eliminate measurement errors introduced by surface leakage current. They are controlled by CMOS microprocessor and feature digital calibration, auto-off function, and smart auto ranging (5 current ranges x 4 voltage range). Along with visual and acoustic indication of...

Read More »
Insulation Testers include noise suppression.
Megohmmeters

Insulation Testers include noise suppression.

Providing line or battery operation, Model S1-552 offers variable test voltages of 50 V to 1 kV in 10 V steps and 1 kV to 5 kV in 25 V steps, while Model S1-1052 can step up voltage in 10 V increments from 50 to 1,000 V and in 25 V increments beyond 1,000 V. Measurement range is 15 Tohm on Model S1-552 and 35 Tohm on Model S1-1052. Both units perform insulation resistance, dielectric absorption...

Read More »
Megohmmeters

Insulation Testers measure voltage/current/capacitance.

Base model, MIT510, comes with 5 pre-programmed test voltages from 250-5,000 V and measures to 15 TW on digital scale. Adding to previous model's capabilities, MIT520 offers ability to step up voltage in 10 V increments from 50-1,000 V and 25 V increments beyond 1,000 V. It also includes pass/fail alarm, various tests, 32k data storage, and RS232 or USB downloading capabilities. Also available,...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics