Stepper Motors deliver 3.0-10.0 oz-in. holding torque.

Incorporating 3 models, PS211 Size-11 Stepper Motor Series can reach up to 200,000 steps/revolution at fine-pitch resolution angle of 0.0018Â-º when driven by 2-phase SND100 NanoDrive(TM). Made from polished steel and durable metal material within both rotor and stator portions, 22 mm motors weigh 110 g and have 0.25-1.3 A rating. Optional 1.8-3.8 V and unipolar/bipolar versions are also...

Read More »
Pancake-Style Motors are suited for beam line applications.

Pancake-Style Motors are suited for beam line applications.

Used in applications where clearance hole at centerline is vital to machine operation, custom Hollow Series Motors are available as 2-phase stepper or 3-phase brushless motors. They are offered with power range of 25-2,500 W in sizes ranging from 8-60 in. dia, with maximum bore size of 20-25% of motor dia. Large bore or hollow shaft configurations enable use in vacuum, radiation, and other harsh...

Read More »
Compact Actuator Systems position and adjust hospital beds.

Compact Actuator Systems position and adjust hospital beds.

Incorporated into standard or platform beds, modular CAJ actuator systems enable safe, power-driven positioning and adjustment in hospital, clinic, and rehabilitation settings. They integrate linear actuators, telescopic pillars, control units, and control panels and offer whisper-quiet, maintenance-free operation. Able to push loads up to 6,000 N, actuators deliver necessary HiLo (height...

Read More »
Actuator Systems position and adjust hospital beds.

Actuator Systems position and adjust hospital beds.

Integrating linear actuators, telescopic pillars, control units, and control panels, CAJ Systems can be incorporated into standard or platform beds. They accommodate pushing loads up to 6,000 N and deliver necessary HiLo support, as well as added support for back, legs, and knees. With standard strokes up to 300 mm, systems meet UL 60.601.1 and IEC 60.601.1 certification. Safety features include...

Read More »
Timing Belt Drives features speeds up to 5 m/s.

Timing Belt Drives features speeds up to 5 m/s.

Available in various motor and carriage configurations, Blue Line 1, Blue Line 3, ZF 1, ZF 2, and ZF 3 Series Slides suit wide variety of automation applications. All use HTD timing belt, have home position switches accurate to less than 0.1 mm, and repeatability of travel less than 0.2 mm. Timing belt features deep curvilinear profile for positive non-slip operation, compared with conventional...

Read More »
New Pillow Blocks from QBC Feature Frelon-® Lined, Self Lubricating, Aluminium Bearing

New Pillow Blocks from QBC Feature Frelon-® Lined, Self Lubricating, Aluminium Bearing

New Hyde Park, New York -- A new series of 64 pillow blocks from Quality Bearings & Components feature Frelon-® lined anodized aluminum bearings which carry 4 to 8 times the load of ball bearings. A 1/2 I.D. Frelon bearing will carry as much load as a 1 I.D. ball bearing. Long service life for these self-lubricated bearings is another major benefit. Although wear rates are affected by surface...

Read More »

Linear Bearings are designed for extended service life.

With self-lubricated design that promotes service life, series of 148 FrelonÂ-®-lined linear bearings tolerates up to 1,500 psi over load-carrying portion of bearing. These anodized aluminum bearings come in open and closed models with precision and standard tolerances. Wear rates are affected by surface finish, shaft hardness, length of travel, contamination, and lubrication. Offered in inch...

Read More »
Linear Ball Bearings come in US and European specs.

Linear Ball Bearings come in US and European specs.

Conforming to AISI 52100 standards and hardened to HRc 60-64, steel Linear Ball Bearings are available in adjustable, open or closed, and standard or heavy-duty types. Bore sizes range from .375-1.500 in. diameter. Number of ball circuits in each unit can range from 4-8, and unit lengths range from .875-3 in.

Read More »
Rod End Bearings come in 125+ inch and metric sizes.

Rod End Bearings come in 125+ inch and metric sizes.

Suited for precision and commercial tolerance applications, bearings come in male and female configurations with optional lubricator fittings. They have spherically shaped inner ring and cylindrical bore for shaft mounting, while outer surface of outer ring facilitates installation into any housing. Able to accommodate moderate shaft misalignments, bearing construction consists of 2- and 4-piece...

Read More »

First GP7200-Powered Airbus A380 Takes Its First Flight

TOULOUSE, France, Aug. 25 // -- The GP7200-powered Airbus A380 completed its first flight today, beginning the ten-month flight-testing program that will lead to certification of the aircraft-engine combination by the European and U.S. airworthiness authorities in 2007. The flight took place at Blagnac International Airport, adjacent to Airbus headquarters in Toulouse. We are thrilled to see the...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics