Protective Sleeves save labor.

Protective Sleeves save labor.

Coated, ballistic Cordura(R) Sidewinder sleeves, with industrial hook and loop closure, allow easy assembly and removal. Sleeves install without disconnecting hydraulic, electrical, and pneumatic hose and cable bundling and can be removed easily for hose maintenance. Material is available in variety of circumferences and bulk lengths to 150 ft for OEM and maintenance operations.

Read More »
Gearing works with standard screw.

Gearing works with standard screw.

Precision gearing works with threaded long length rods and adapts to rotary or linear motion machinery. It is capable of fine adjustment and positive positioning. Gear is available in variety of standard sizes or can be made to order.

Read More »
Feedthrough Actuator provides motion control in vacuum.

Feedthrough Actuator provides motion control in vacuum.

Chamberlink, single-unit combination feedthrough and servo actuator, allows output shaft to operate in vacuum without shaft seals, preventing leaks. It is available in sizes 10, 14, and 32, with output torques from 10 to 300 in.-lb and output speeds of 10 to 50 rpm. Actuator is rated for vacuum levels of 10E-8 Torr.

Read More »
Pneumatic Actuator works like human muscle.

Pneumatic Actuator works like human muscle.

Type MAS Fluidic Muscle uses material deformation and flexure to achieve linear motion. Basic concept involves wrapping flexible hose with non-elastic fibers arranged in rhomboidal fashion. This results in 3D grid pattern. When compressed air is introduced into system, grid pattern is deformed, pulling force is generated in axial direction, and muscle shortens. Range includes 10, 20 and 40 mm...

Read More »
Corrosion Resistant Actuators work in food processing.

Corrosion Resistant Actuators work in food processing.

CR Series actuators resist sulfur dioxide atmosphere, sodium chloride mist spray, and water condensation. Five models are available: CRDNG and CRDNGS conform to ISO 6431 and VDMA 24562 standards, have piston dia from 32 to 100mm and stroke lengths between 10 to 2000mm; CRDNG has integrated swivel flange for clevis mounting. CRDSNU and CRDSW are slim-line actuators with round-section barrel for...

Read More »
22mm DC Motor promotes heat dissipation.

22mm DC Motor promotes heat dissipation.

LO-COG 22mm brush-commutated DC motor is 1.900 in. in length and employs 5-slot armature design and bonded neodymium iron boron magnets. It is suitable for mass data storage and semiconductor processing equipment. Standard cartridge assemblies prolong brush life by maintaining optimum brush force.

Read More »
Belt-Driven Boom positions robots and gantries.

Belt-Driven Boom positions robots and gantries.

DGEA toothed-belt-driven electric boom-arm axis is suitable for positioning applications requiring horizontal or vertical projecting motions. Fixed pinion drive mechanism engages stationary toothed belt, causing projecting structure to traverse work envelope. Roller guide bearing system is integrated into housing. Unit has stroke range of 100-1,000 mm, payload of 110 lb, speed of 2.1 m/sec, and...

Read More »
Actuators offer short overall length.

Actuators offer short overall length.

Compac Series 300 and 1000 Acme screw actuators have die-cast aluminum power heads and zinc-plated inner and outer tubes. Compac 300 Torque Limiter model, with 12 in. stroke, is less than 20 in. long. Series 300 models withstand 1,000 lb static load and move loads up to 300 lbs. Series 1000 models withstand 5,000 lb static load and move loads up to 1,000 lbs. Stroke lengths range from 4 to 24 in....

Read More »
Stepping Motor Drive IC operates in -20 to +75

Stepping Motor Drive IC operates in -20 to +75

Model FAN8200 2-channel drive IC is manufactured using bipolar process. Integrated dual H-bridge drivers with vertical PNP power transistors result in low saturation voltage (0.4V @ 0.4A) and optimum thermal characteristics (Vcc = 2.5V ~ 7.0V). Unit features built-in shoot-through current protection and thermal shutdown (TSD) function. FAN8200 accommodates 3.3 or 5V MPU control input, and...

Read More »
Metric Chain fits conveyor lines globally.

Metric Chain fits conveyor lines globally.

Metric 7705 MatTop metric chain is available in both molded-to-width (84.0 mm) and assembled-to-width (85.0 mm increments) constructions. Sprocket pockets are on 85.0 mm centers. Both versions have same chain height, share same sprockets, and are identifiable by orange TwistLock plugs.

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics