New Mechanical Power Transmission Products

Clamping Cylinder loads and unloads light parts.

Twist Clamp has internal mechanism to produce rotary piston motion throughout stroke. By attaching clamp arm, actuator becomes clamping mechanism for light-duty holding applications. Motion rotates clamp arm out of work area for easy loading and unloading of parts. It uses 40mm bore cylinder that produces up to 224 lb of clamping force at maximum pressure of 140 psi. Cylinder body is hard coat...

Linear Bearings are made from 100% polymer.

Drylin-® RJI inch and Drylin-® RJM metric polymer linear bearings are directly interchangeable with standard re-circulating ball bearings, and fit into standard pillow blocks. Made from iglide-® J material, bearings have low coefficient of friction and shock and vibration dampening, require no external lubrication, and resist corrosion and wear. They are available from stock in standard sizes.

Dustproof Motor locks out contamination.

Abrasive Dustproof Series, sealed with built-in o-rings, has air fittings for pressurization up to 15 psi. Shaft slinger prevents abrasive dust from attacking shaft seal material, which in turn prevents dust from entering bearing. Motor is available in standard 23, 34, 42 and 65 frame sizes. Applications include industrial operations that use, produce or process powdered materials such as fiber...

Speed Reducers withstand corrosive environments.

All-Stainless Steel Speed Reducers, with horsepower ranges through 5 HP, are available in frame sizes 918, 921, and 926 with quill-type 56C, 140TC, and 180TC NEMA C-face inputs. Construction consists of 304 cast stainless steel housings, covers, and shafts; stainless steel hardware; O-ring sealed C-face; and Mobile SHC 634 synthetic lubrication. Pressure compensation chamber prevents internal...

Checklist: How to Get the Right Belt the First Time

This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.

Linear Actuators can be custom configured.

Electromechanical CATR actuators can be built using standard components such as motors, gears, screws, controls, and attachments to perform opening/closing, clamping/gripping, raising/lowering, or pushing/pulling functions. CATR 33 has ACME sliding screw for standard operation, CATR 33H has ACME screw, and CATR 32B has Ball screw. Options include stroke lengths, ac or dc motors, and friction...

Miniature DC Motors are 16mm in diameter.

16G88 Series DC ironless-rotor motors have continuous power rating of 4.5 W. They are available with choice of 6 windings for supply voltage from 3 to 24 V. Maximum recommended shaft speed is 12,000 rpm, and typical maximum continuous output torque is 5 mNm. All incorporate precious metal commutators and sleeve bearings. Matching 16mm dia planetary and spur gearheads are available with ratios...

Vertical Pump Motor directly replaces less efficient motors.

Mod-Max meets NEMA premium motor efficiency standards, operates 0.8 to 4.0% more efficiently than company's older, less efficient motors, and can be used for VFD applications. Canopy cap requires no gasket and has 3 stand-offs to allow air circulation to help prevent moisture condensation. Winding includes pulse endurance wire. Each winding is also treated with 100% solids insulation material....

Clutch/Brakes start/stop loads to 1/2 deg per revolution.

CB Series Wrap Spring clutch/brakes, in 5 sizes, have rated static torque ranging from 25 to 2500 lb.in. and 1800 to 300 RPM maximum operating speed. Super CB Series, in 3 standard sizes, has rated static torque from 250 to 2500 lb.in. and 750 to 300 RPM maximum operating speed. Three models of WSC Series clutches are available in 5 sizes with rated static torque from 25 to 2500 lb.in. and 1800...

Gearmotors/Speed Reducers operate at 95%+ efficiency.

90.1 Series helical bevel gear products are available as triple- or quadruple-reduction drives with foot, flange, or shaft mount configurations. They offer power ranges from 1/6 to 200 HP, output speeds from 0.1 to 218 rpm, torque up to 283,200 lb-in., and gear ratio ranges from 8.04:1 to over 300,000:1. Unicase(TM) housing eliminates oil leakage and contamination. Autovent sealing prevents...

Electric Disc Brakes never require adjustments.

Stearns 321 Series consists of 6 totally-enclosed, non-ventilated, armature-actuated electric disc brakes. They are available with static torque ratings of 3, 5, 7, 15, 35 and 50 lb-in. Brakes are designed for service in dirty or contaminated environments to decelerate or hold inertial loads when voltage to brake coil is disconnected. They are available in versions that will operate on 12, 24,...

Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment

Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.