Spherical Bearing lubricates itself.

Spherical Bearing lubricates itself.

PolyLube(TM) incorporates filament wound inner race to maximize load capacity while providing self-lubrication as inner section accepts misalignment. Both bearing surface and inner race are self-lubricating, eliminating need for grease zerks and complex grease delivery systems.

Read More »
Grinding Wheels are continually sharpened.

Grinding Wheels are continually sharpened.

CIMFORM(R) MSB has abrasives that micro-fracture during use, creating new grinding surface, and thus constantly sharpening themselves. They are suitable for centerless, center-type, micro-centric, surface, surface/creepfeed, internal, tool manufacturing, and tool cutter applications. MILSPEX(R) educational software tool familiarizes user with grinding technology and processes. DATA PRIME(TM)...

Read More »
Linear Motors have environmentally protected design.

Linear Motors have environmentally protected design.

LC brushless linear motors utilize laminated steel core design optimized for Finite Element Analysis. Model LC-80-240 is 80 mm wide x 240 mm long and rated at 62 lbf continuous. Model LC-80-340 is 80 mm wide x 340 mm long and rated at 94 lbf continuous. Stainless steel shroud covers magnets providing protection. Magnet track sections are easily butted together to achieve any required travel....

Read More »
LPA Actuator is 1/2 height of Twin Bore Table actuators.

LPA Actuator is 1/2 height of Twin Bore Table actuators.

Single bore cylinder Low Profile Air Table (LPA) Actuator provides accurate linear motion. It incorporates one guide rail mounted along side cylinder bore, creating slide table. LPA is available with 8 mm bore size and stroke lengths in 10 mm increments. Options include magnetic position sensing and US customary threads. Both actuators feature anodized aluminum bodies and tooling plates. Piston...

Read More »
Planetary Gearmotors suit OEM applications.

Planetary Gearmotors suit OEM applications.

Compact, 16 mm Planetary Gearmotors are offered with range of motor windings, gear box housings, gears, and gear ratios. DC motor has speed range of 7 to 3,000 rpm and can be specified for any voltage from 1 to 36 V. Lightweight, 1-, 2-, 3-, and 4-stage gearmotors have torque range of 1 to 30 oz-in., standard ratios from 3.6:1 to 450:1, are 90% efficient, and weigh 1.5 oz. Standard housing and...

Read More »
DC Motor fits hand-held tools.

DC Motor fits hand-held tools.

Compact, brushless device measures 1.75 by 4 in. and produces torque up to 190 oz-in., making it suitable for use in assembly tools, machine-tool spindles, and centrifuges. With 90% efficiency rating, motor remains cool during operation and operates in temperatures up to 155 deg C. Options include windings for specific power requirements and custom mounting configurations.

Read More »
PM Motor is rated for 160 deg C temperature rise.

PM Motor is rated for 160 deg C temperature rise.

ThinGap(TM) TG3600 Series slotless brushless PM motor incorporates winding technology that eliminates eddy current and hysteresis losses. Maximum continuous torque of 115 oz-in. is achieved at 2400 rpm rated speed using input voltage of 24 Vdc and 15.6 A from PWM servo amplifier. Armature inductance measures below 10 microhenries and line-to-line resistance is 0.31 ohms @ 25 deg C. Motor measures...

Read More »
Stepping Motors have high torque density.

Stepping Motors have high torque density.

PK Series miniature 2-phase hybrid devices are available in 2 frame sizes: 1.1 and 1.38 in. sq. Smaller model is available in lengths of 1.26, 1.57, and 2.03 in. that produce holding torques of 9.2, 13.7, and 16.6 oz-in. respectively, in bipolar excitation mode. It reaches shaft speeds of 4,000 rpm. Larger model is available in lengths of 1.46 and 2.05 in. with holding torques of 28 and 54...

Read More »
Shaft Alignment System covers all alignment contingencies.

Shaft Alignment System covers all alignment contingencies.

D505 system consists of two 18 mm detectors (distance 66 ft, 0.250 in. misalignment), display unit, cabling, measuring tape, manual, and carrying case. Machine Train Program enables user to align 2 to 5 machines in a row. System includes Thermal Growth program and RefLock(TM) function, that provides alignment in bolt bound situations, plus all standard upgradeable laser alignment features, such...

Read More »
Brake Controller operates pneumatically.

Brake Controller operates pneumatically.

Manual device is suitable for open-loop unwind applications that do not require automated closed-loop control. It operates on 0 to 100 psi filtered shop air and has 3 pneumatic solenoids that channel air flow to 1, 2, or 3 brakes or brake cylinders. Two-position toggle switches turn each output channel on and off. Adjustable regulator knob and air pressure gauge on front panel let machine...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics