Powder Brake and Controller provide precise tension control.
Controls and Controllers

Powder Brake and Controller provide precise tension control.

Double E/Re Eleflex magnetic particle brake provides quick-response tension control for light-tension applications. Low-voltage 24 Vdc operation presents no safety hazards. Mega Controller connects to powder brake without current regulator. Three push-button keyboard allows easy programming of 40 functions. Three independent PID settings allow controller to have different set-ups for running,...

Read More »
Electric Brakes are offered with steel housing.
Brakes

Electric Brakes are offered with steel housing.

Series 320 dyamic disc brakes come in 3 sizes. Size 1.2 has static torque rating of 3 lbs-in. and is available with mounting bolt circle of 2.5 or 2.62 in. Size 1.8 has static torque of 7 or 15 lb-in, and comes with 2.125 in. bolt circle as well as 3.5 in. bolt circle, with or without 2.5 in. register for 42C frame motors. Size 2.8, with 35 lb-in. static torque, is available with 3.5 in. bolt...

Read More »
Gearbox offers maximum output torque of 796,500 lb-in.
Gearheads and Gearboxes

Gearbox offers maximum output torque of 796,500 lb-in.

Clincher(TM) Parallel Shaft-Mount Gearbox SK 12382 triple-stage geared motor is available with either solid or hollow output shaft. Construction features include UNICASE(TM) one-piece housing, gearing designed to AGMA CLASS 13 standards, Quadrilip(TM) oil sealing system, and autovent sealing. Operational efficiency is rated at 98.5%. Power ranges from 15 to 200 hp, output speeds vary from 8.7 to...

Read More »
Stepping Motor System provides high-accuracy positioning.
Motors

Stepping Motor System provides high-accuracy positioning.

Miniature PMC Series 5-phase hybrid system includes printed-circuit driver board and miniature harmonic drive. Motors have zero-backlash harmonic gearheads in 50:1 (PMC33A1-HG50) and 100:1 (PMC331A1-HG100) gear ratios. Basic step angle performance reaches 0.0072° for 100:1 ratio. PMC33A1-HG50 produces 160 oz-in at 25 rpm using thin driver with 24 Vdc and 0.35 A per phase input....

Read More »
Planetary Gearboxes mount directly to servomotors.
Gearheads and Gearboxes

Planetary Gearboxes mount directly to servomotors.

GTM Planetary Gearboxes' range and modular construction make them suitable for use in factory automation applications. Taper bearings act as pumps, minimizing oil used in vertical, horizontal, or angled applications. Cold-fusion process between coupling and sun gear allows emergency stop torque for safety and reliability. GTM specifies 1,000 emergency stops before loss of accuracy.

Read More »
DC Motors/Gearmotors feature skewed armatures.
Motors

DC Motors/Gearmotors feature skewed armatures.

LO-COG® Series 8000 brush-commutated DC motors and gearmotors feature 7-slot skewed armatures designed to minimize magnetic cogging. Motors are available in 3 lengths and can achieve peak torques up to 16.8 oz-in. and speeds to 10,650 rpm. Gearmotors are offered in 3 lengths with 11 ratios from 6.3:1 to 1803.6:1 and can achieve peak torques to 100 oz-in. (standard) or 160 oz-in. (with...

Read More »
Stepping Motor offers integrated motion control.
Motors

Stepping Motor offers integrated motion control.

NEMA size 23 stepping motor, MDrive23, offers on-board +12 to +48 V microstepping drive and programmable MDrive 23 motion control. Features include four 5 to 24 V general purpose I/0 lines, one 10 bit analog input, and 0 to 5 MHz step clock rate. Microstep resolution is rated up to 51,200 steps per revolution. MDrive23 Motion Control communicates over RS485, and baud rates range from 4,800 to...

Read More »
Gearheads and Gearboxes

Pully Drive System integrates with linear module applications.

LPB integrated geared pulley drive system is available in sizes from 70 to 120 mm with ratios of 1:1, 3:1, 5:1, and 10:1. Gearbox has flange output, allowing it to be nested inside pulley, eliminating need for right angle gearbox, couplings and/or additional bearings. LPB design increases radial load capacity associated with belt and pulley applications, greatly increasing output bearing life.

Read More »
Software facilitates set up of linear and rotary actuators.
Actuators

Software facilitates set up of linear and rotary actuators.

proTern(TM) software is designed for Ternary linear and rotary actuator system. With Ternary, any of 16 specific positions can be defined via software, then achieved with absolute accuracy. proTern provides real numerical data for position, velocity, acceleration, deceleration, and force/torque commands using PC or handheld PDA. Ternary is available in 46 mm frame size, with stroke lengths of 25...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers