Speed Reducers feature washdown coating.
Gearheads and Gearboxes

Speed Reducers feature washdown coating.

Suited for speed reducers, Stainless Bost-Kleen(TM) utilizes Bisphenol-F type epoxy, which offers chemical, pressure, and thermal resistance to prevent wear and cracking caused by caustic chemicals and high-pressure washdowns as well as scratches that may occur from contact during installation and operation. Coating is USDA and FDA accepted, BISCC certified, and available on all speed reducers.

Read More »
Rod Lock brakes and holds pneumatic cylinders.
Brakes

Rod Lock brakes and holds pneumatic cylinders.

Dynamic Rod Lock slows and stops loads in all axes without relying solely on cylinder itself. It provides spring engaged brake actuation and produces low backlash for accurate stopping and holding. Unit fits standard cylinder rod diameters of 16, 20, 25, and 32 mm as well as 0.625, 1.000, and 1.375 in. Featuring integrated molded friction materials, lock is IP67 rated for wash down and is safe on...

Read More »
Ball Bearings accommodate heavy radial and thrust loads.
Bearings

Ball Bearings accommodate heavy radial and thrust loads.

MRC® R-Type single-row angular contact ball bearings feature 15Â-º contact angles and counterbored outer rings. Products, supplied with ABMA C3 radial clearance, can be engineered with custom clearances. Available cage types and materials include 2-piece pressed steel, ball-riding, bent prong cages; one-piece machined bronze inner ring-riding cages; and one-piece phenolic inner...

Read More »
Drives

Zero-Backlash Drives come in 2 pinion arrangements.

Rack and pinion drives eliminate system backlash via split-pinion or dual-pinion arrangement. Positioning accuracy is maintained during acceleration and deceleration as well as for direction of travel reversals. Mechanically preloaded split-pinion drives utilize axial spring to load one pinion half against other. Electrically preloaded dual-pinion drives utilize 2 motors, each driving one pinion...

Read More »
Machine-Screw Actuator is rated for 3 ton capacity.
Actuators

Machine-Screw Actuator is rated for 3 ton capacity.

Suited for applications requiring positive mechanical positioning, actuator is driven by manual crank or gearmotor. Self-locking unit holds loads in position indefinitely and without creep. Translating contact is made between bronze worm gear and turning worm shaft. With 24.2 efficiency rating, product can be driven at 2 hp max and is available with top-plate, clevis-end, or threaded-end mounts.

Read More »
Shafting/Accessories work with linear guidance systems.
Shafts

Shafting/Accessories work with linear guidance systems.

SKF® inch series shafting and accessories offer users capability to design linear guidance systems for various applications. Shaft materials include hardened and ground carbon steel as well as chrome-plated and stainless steel. Standard shaft diameters range from Â-¼-2 in. Accessories include inch shaft support rails and shaft end supports, and options include custom hole drilling and...

Read More »
Servo Reducers provide precise positioning.
Gearheads and Gearboxes

Servo Reducers provide precise positioning.

Developed for use with servo motors, Servo-Worm Reducers feature angular backlash of less than 2 arc-min, with lower backlash levels optional. Units come in 5 sizes with 50-125 mm center distance, input speeds up to 5,000 rpm, and reduction ratios from 4.75 to 52:1. Wide range of motor couplings and mounting flanges are available for assembly to virtually all servo motors. Hollow bore output can...

Read More »
Actuators

Actuator targets material handling and automotive sectors.

High-Thrust Linear Actuator offers precise positioning by means of rotating or non-rotating spindles. Linear speeds up to 550 in./min are offered, with stroke lenghts up to 20 in. as standard. Axial load capacities up to 36,000 lb. are possible, with higher load capacities reached by using two actuators in tandem to share loads. Actuator includes safety devices to track spindle travel position...

Read More »
Gearheads and Gearboxes

Servo Reducers are suited for precision applications.

With less than 6 arc-min angular backlash at output shaft, E-Servo Worm Reducers are available in 4 sizes with 32-80 mm center distance, input speeds to 5,000 rpm, and reduction ratios from 4.75-52:1. Various motor couplings and mounting flanges are available, and hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements. Applications include rotary axis...

Read More »
Gearheads and Gearboxes

Integrated Racks mount directly to linear guide rails.

Eliminating need for additional machining and alignment, Integrated Racks can be assembled to rail off of machine frame. By mounting rack and rail together, need for separate mounting surface for rail is eliminated. Drives are suited for applications such as axis drives requiring precise positioning and repeatability, traveling gantries and columns, pick and place robots, and material handling...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers