Synchronous Motors suit hazardous locations.
Motors

Synchronous Motors suit hazardous locations.

Superior Electric Series XCE satisfies ATEX standards for use in potentially explosive atmospheres as defined by CE directive 94/9/EC. Motors have flameproof enclosure with max surface temperature of 100°C. Requiring only resistor-capacitor network to operate from single-phase ac utility power, units turn at speeds of 72 rpm with 60 Hz or 60 rpm with 50 Hz. They are available with torques...

Read More »
Conveyor Chains provide support and smooth transport.
Chains

Conveyor Chains provide support and smooth transport.

Suited for packaging industry, IWIS accumulator chains promote even load distribution where each pin bears load. Product incorporates acceleration rails; light-running transport rollers in hardened steel, plastic, or anti-static; and offset roller arrangements. Featuring wax lubrication at bearing points, chains can be specified in variety of shapes and configurations and are compatible with...

Read More »
Motors

Inverter Duty Gearmotors suit conveyor applications.

Totally enclosed, fan-cooled, reversible motors are 3-phase, 230 V, 50/60 Hz units that can accept optional external brake. Rated from 2-30 rpm @ 6 Hz and 26-437 rpm @ 90 Hz, products include Â-¼ hp models in 200 and 650 Series and ½ hp models in 400 and 650 Series. AC gearmotors use variable frequency inverter drives to offer constant torque from 6-60 Hz input and constant...

Read More »
AC Gearmotors are rated to 1½ hp.
Motors

AC Gearmotors are rated to 1½ hp.

Parallel shaft 880 series, available in 5 gear ratios from 5.8:1-42.8:1, consists of totally enclosed, fan cooled motors with preloaded, permanently lubricated, shielded bearings and dynamically balanced rotor shaft. Able to produce up to 1,060 lb-in. continuous-duty torque, products feature 2- or 3-stage integral gear cases with AGMA grade 9 hobbed gears. Operation options include single-phase...

Read More »
Shaft/Coupling Alignment System uses single beam technology.
Shaft Coupling Aligners

Shaft/Coupling Alignment System uses single beam technology.

Rotalign® ULTRA utilizes 5-axis, 2-plane sensor and built-in electronic position detector for simple to complex alignments. It features scratchproof backlit color screen and backlit keyboard suited for any working condition. Accurate data for shimming and horizontal correction are obtained from continuous SWEEP measure mode. USB and Bluetooth® connectivity is provided for interface...

Read More »
Gearheads and Gearboxes

Planetary Gearhead features low backlash.

Planetary Gearhead suits servo motor applications that require precision and durability. It mounts directly to company's BSM servo motor family to provide torque multiplication, speed reduction, and inertia matching. Standard backlash is 15, 12, or 10 arc-minutes. Steel construction allows high-rated torque for emergency stopping. Dual ball bearing support provides stiffness and high radial-load...

Read More »
Motors

Brushless Servomotors feature stainless steel construction.

SSMSM series servomotors, available in standard and low inertia models and 5 frame sizes, provides continuous torque to 280 lb-in with peak torques ranging 3-4 times continuous. Rated IP67, they withstand 1,500 psi washdown conditions and can be used in harsh, corrosive, high hygiene environments. With UL, CSA CE and BISSC agency approvals, typical applications include food/liquid processing,...

Read More »
Motors

Brake Motor withstands rugged service of conveyor.

Super-E® brake motors have ISR magnet wire and are inverter-ready. They feature 20:1 constant torque speed range when used with adjustable speed drive, and spring-set brake is mounted opposite drive end, providing NEMA standard foot mount spacing. Features include 230/460 V brake coils, 1-30 hp, 1,780 rpm, and TENV or TEFC enclosures. Super-E Washdown Â-½-5 hp brake motors, designed...

Read More »
Actuators

Linear Actuators carry load over 50-300 mm stroke.

Accepting 12, 24, or 35 Vdc power, low noise dc Series MMP.LA-3 delivers up to 170 lb of force, and is available with stroke lengths of 50, 100, 200, 250, and 300 mm. Selection of output speeds are provided with gear ratios of 5:1, 10:1, 20:1, and 30:1. Lubricated for life, standard unit features built-in limit switches, non-rotating inner tube, aluminum outer tube, and corrosion resistance....

Read More »
Shaft Coupling Aligners

Laser System facilitates bore and shaft alignment.

Portable Microgage Bore Alignment Kit consists of 2.250 in. or 1.000 in. dia cylindrical laser, tool holder, chuck, or shaft mount. Readings as small as 0.0001 in. define bore or shaft's alignment are transmitted to handheld display for guiding user to what changes are needed for optimal performance. Measurements can be made over 80 ft range, and computer interface stores readings and connects...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers