Pin Locating Clamp features fully enclosed design.
Actuators

Pin Locating Clamp features fully enclosed design.

Pneumatically powered actuator, Series PLC locates, clamps, and supports parts in weld areas. Fully enclosed design provides protection against weld slag and other contaminants, while built-in locking mechanism locks pin in any position to secure parts if air pressure is lost or removed. Available in 2 sizes with 5 pin size choices and 2 pin styles, Series PLC provides 12.5 mm max clamping...

Read More »
Chains

Knuckle Chains are suited for case and tote conveyors.

Suited for heavy-duty transport, C3200 straight-running and C3210 radius Knuckle Chains are molded in Polyoxymethylene (acetal) or Polyamide (nylon), which withstands temperatures to 266°F. Impact-resistant, 2 in. pitch chains are quiet-running and require no lubrication. Model C3210 has 15.7 in. center line turning radius. Both chains can be used with bi-directional drive and are available...

Read More »
Brush DC Motors feature 7-slot skewed armatures.
Motors

Brush DC Motors feature 7-slot skewed armatures.

Pittman® Series 8000 brush-commutated DC motors minimize magnetic cogging at low speeds, which allows smooth and quiet operation. Motors are available in 3 lengths: 2.070, 2.445, and 2.915 in. They can achieve peak torques up to 16.8 oz-in. and speeds up to 10,650 rpm for standard motors at rated voltages. Windings are resin-impregnated for greater reliability. Applications include data...

Read More »
Non-Captive Linear Actuator occupies 0.8 in. space.
Motors

Non-Captive Linear Actuator occupies 0.8 in. space.

Suited for linear motion applications, Size 8 hybrid linear actuator features engineering thermoplastics in rotor drive nut and stainless steel Acme lead screw for quiet and maintenance-free operation. It is available in resolutions from 0.0015-0.04 mm per step and delivers thrusts of up to 10 lb. Design is suited for linear travel requirements and applications where lead screw is secured at both...

Read More »
Fluid Power Pressure Switch offers 100 million cycles.
Switches

Fluid Power Pressure Switch offers 100 million cycles.

Herion 33D series is available in electromechanical and electronic variants that can be utilized in pneumatic and hydraulic environments. Switching status is indicated by backlit, real-time LED display. With features such as programmable delays, tamper protection, and all stainless steel wetted parts, pneumatic and hydraulic/Allfluid models are rated for 0.5-232 psi and 0-9,000 psi operating...

Read More »
Motors

DC Gearmotor accepts any 24 Vdc source.

Measuring 2.14 in. dia x 7.25 in. long, Model MMP.TM55-24V.GPK52-029.1 has keyed output shaft of 12 mm dia by 25 mm long. Mounting is accomplished with 4 face-mount M5 threaded holes, equally spaced on 40 mm dia BC. Output is rated for 2.9 Nm continuous torque at 160 rpm and 9 Nm peak. Motor requires 3.0 A at 24 Vdc to generate full load output torque. Options include optical encoders, failsafe...

Read More »
Foodservice Coolers

Truck HVAC System drives engine accessories electrically.

MorElectric System provides electrically powered heating, ventilating, and air-conditioning system, allowing all HVAC components to be removed from engine compartment. Electric power comes from 7,300 W generator that replaces alternator. When coupled with Auxiliary Power Unit, system provides driver with comfortable cab environment when main engine is off. Using Shore Power, truck is plugged into...

Read More »
Rotary Actuators feature single-stage reduction gear unit.
Actuators

Rotary Actuators feature single-stage reduction gear unit.

Hollow Shaft Series DG is available in 2.36, 3.35, and 5.12 in. sizes with permissible torque of 7.9, 24, and 106 lb-in., respectively. Output table permits user to directly couple to application load. Gear reduction mechanism achieves repeatability of ±15 arc-sec and total backlash of less than 2 min. Maximum speed is 200 rpm or 250 KHz input frequency, depending on resolution setting.

Read More »
Laser Adapter converts spot into line.
Laser Components

Laser Adapter converts spot into line.

Intended for Series 150 and 206 laser diode modules, Model LO-X facilitates edge detection, straight edge determination, and almost any alignment application. Line adapter is offered in 4, 45, 60, and 90° configurations. When paired with Model 150 laser diode module, combined units have focus range from 60 mm to infinity. Housed in anodized aluminum, adapter measures 9 x 16.5 mm dia and...

Read More »
Ball Screw Drive suits extended length applications.
Motor Controllers and Drives

Ball Screw Drive suits extended length applications.

Model AGK uses ball screw in rigid aluminum housing to drive motion at speeds up to 96 m/min, even in extreme environments. Available in ball screw accuracy classes 5, 7, and 9, and in sizes 20, 32, and 40 x, unit is suited for high-speed machines where clearance or environmental conditions require compact, protected drive system. Model AGK comes as ready-to-install unit in lengths up to 6,000...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers