Actuators

Voice Coil Motors produce force from 8.1-31.5 lb.

Measuring 1.85 in. OD x 1.26 in. long, Model VM4632 produces 8.1 lb force and provides 0.4 in. stroke with 210 W input at 10% duty cycle. Continuous force reaches 2.7 lb. Measuring 3.15 in. OD x 2.13 in. long, Model VM8054 provides 31.5 lb force and develops 1.26 in. stroke with 500 W input at 10% duty cycle. Continuous force is 10.1 lb. Two intermediate motors, Models VM5042 and VM6548 develop...

Read More »
Pin and Sleeve Devices conform to IEC 309 standards.
Sleeves

Pin and Sleeve Devices conform to IEC 309 standards.

Watertight plugs, receptacles, connectors, inlets, and mechanical interlock devices provide safe electrical connections in commercial and light industrial environments subject to temperature extremes, vibration, impact, dirt, moisture, corrosive elements, and wash downs. Housings are flame retardant, impact-resistant and non-corrosive Valox and nylon material. Rated to 20, 30, 60, and 100 A,...

Read More »
Step Motor includes drive/control board.
Motors

Step Motor includes drive/control board.

MiniPak combines NEMA Size 11, 1.8° step motor with drive/control board using Trinamic TMC222 drive chip. Motor measures 1.1 in.Â-² and produces 9.2 oz-in. of holding torque. Operating from 8-29 Vdc, drive board has programmable coil current up to 800 mA and is capable of 2x-16x microstepping. It contains fixed frequency PWM current control with automatic selection of fast and slow...

Read More »
Brushless Motors achieve zero cogging.
Motors

Brushless Motors achieve zero cogging.

Frameless, Axial Airgap Series AAG offers smooth sinusoidal torque output versus angle and applies to almost any speed range. Motors can be optimized for 3-phase brushless motor controllers from 5-48 V with speeds from 0.1-20,000 rpm. Axial thickness of 5 mm can be achieved at up to 300 mm diameter. Applications include scanning equipment, inspection machines, and small integrated pumps.

Read More »
Compact SAPR Brakes are suited for mobile applications.
Brakes

Compact SAPR Brakes are suited for mobile applications.

Directly coupled to output shaft, SB brake uses spring-applied/pressure-release, wet multiple-disc technology to provide fail-safe brake capability. Wear components are immersed in fluid and environmentally sealed to prevent contamination and corrosion. Constructed with cast iron housing, case hardened steel shaft, and cylindrical bearing, product has max static load-holding capacity of 5,500...

Read More »
Miniature DC Gearmotor features optional encoder.
Motors

Miniature DC Gearmotor features optional encoder.

Measuring 0.63 in. OD x 2.46 in. long, Series HG16 integrates miniature DC motor, geartrain, and encoder assembly. Available in 12 models with voltages of 6, 12, and 24 V, units offer gear ratios of 30:1, 60:1, 120:1, and 240:1 and torque from 3.47-6.94 oz-in. No load speeds range from 390 rpm in 30:1 model down to 60 rpm in 240:1 models. Optional encoder allows user to position gearmotor in...

Read More »
Clutch/Brake Modules require no maintenance.
Clutches

Clutch/Brake Modules require no maintenance.

Electromagnetic Smooth-Start UniModules provide consistent, smooth starting and stopping throughout entire torque range. Units are NEMA C-face compatible and automatically adjust for wear. They can be paired with CBC-300 clutch/brake control, which allows clutch and brake torque levels to be set independently. Once torque levels are set, control's circuitry supplies constant current to...

Read More »
Shaft Coupling Aligners

Tool aligns rollers, shafts, and web-handling systems.

Machined from solid aluminum with stainless steel parts, Roll Adjuster is placed onto top of master roller, drive shaft, or idler, and is held in place by pair of V-legs or adaptable mounts. Fine adjustment screw is turned until precision bubble level is centered in glass vial. Typical applications include paper mills, converting lines, printing presses, plastic bag lines, coating lines, and...

Read More »
AC Servo Systems provide 0.08-26.4 lb-ft of peak torque.
Motor Controllers and Drives

AC Servo Systems provide 0.08-26.4 lb-ft of peak torque.

SureServo(TM) digital brushless servo systems include 8 servo motors, in brake and non-brake models, that can be operated with 1 of 3 servo drives. Systems range from 100 W to 3 kW continuous power, and can be controlled in position, velocity, or torque mode. Utilizing 8 programmable inputs and 5 programmable outputs, real-time connectivity with any control system is assured. Configuration and...

Read More »
Conveyor Chain provides gentle handling.
Chains

Conveyor Chain provides gentle handling.

Soft Products Conveyor Chain features smooth surfaces and link interfaces for gentle handling and minimal dust generation and intrusion in product handling applications. Chain and slide rail's construction of wear resistant, low-friction materials optimizes service life.

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers