Actuators

Linear Actuator features twin outrigger bearings.

Suited for applications subject to high side loading, ServoTube Linear Actuator features iron-sleeve design and is available in 4 models that deliver continuous force of 14-27 lb, peak force up to 193 lb, and 12 stroke lengths from 29-311 mm. Magnetic design provides 12 micron repeatability and 250 micron accuracy from non-contact, integral position sensor. Outrigger bearings hold thrust rod...

Read More »
Mounted Bearings offer protection during washdowns.
Bearings

Mounted Bearings offer protection during washdowns.

Offered in heavy-duty cast iron or extreme-duty cast stainless, corrosion-resistant Marathon® Bearings feature dual-sealing system to extend service life and inhibit potentially damaging contamination. Multi-function rubber seals are bonded to AISI 304 stainless steel, and sealed-for-life lubricants are USDA approved for food applications. Standard housing styles include pillow block, 2- or...

Read More »
Motors

DC Gearmotor develops 72 lb-in. torque at 250 rpm.

Accepting any 24 Vdc source including battery power, Model MMP-S28-150C-24V GP81-014 requires 13.4 A at 24 Vdc to generate full load output torque. It produces 8.5 Nm continuous torque at 250 rpm and 90.0 Nm peak. Rated IP54 for operation in harsh environments, gearmotor measures 3.2 in. dia x 8.5 in. long and has keyed output shaft of 19 mm dia x 40 mm long. Mounting is accomplished with 4 face...

Read More »
Actuators

Rotary Electric Actuator is suited for hazardous locations.

Certified for applications in Class 1 Division 1 locations that present ignition or explosion risk, Group 11E rotary control drive is used for automatic modulation of dampers, quarter-turn valves, and other final control elements. Maintenance-free design offers microprocessor-based electronics, no duty-cycle limitations, and variable speed operation. On-board control module feeds drive motor...

Read More »
Rolling Bearings offer electrically insulated design.
Bearings

Rolling Bearings offer electrically insulated design.

Promoting machine uptime, SKF INSOCOAT® Rolling Bearings protect against damage caused by passage of electric current in ac and dc motors, generators, and associated equipment. Thin aluminum oxide layer forms barrier against grease oxidation and electric arcing that typically causes fluting damage to rollers and raceways. Bearings are performance tested to 1,000 Vdc with minimum ohmic...

Read More »
Motors

DC Cooling Fan Motor produces max airflow of 400 cfm.

Offered in 24 and 48 V models, San Ace 172GV sidecut-style fan motor offers quiet operation from 6.77 x 5.9 x 2 in. package. RoHS-compliant unit, designed for use in servers, data storage systems, communications equipment, and industrial equipment, produces max airflow of 11.32 mÂ-³/min and consumes 96 W. Its L10 life expectancy is 40,000 hr @ 60ºC. Optional features include...

Read More »
Motors

DC Cooling Fan Motor features high-airflow design.

Offered in 12, 24, and 48 V models, San Ace 120SG measures 4.72 in. sq x 1.5 in. thick and provides max airflow of 260 cfm. With L10 life expectancy of 40,000 hr at 60°C, RoHS-compliant motor is suited for data storage systems, communications equipment, and industrial equipment. Optional features include tachometer sensor and lock rotor sensor outputs, as well as PWM control, which permits...

Read More »
Actuators

Electric Linear Actuator has corrosion-protected surface.

SLME electro-mechanical linear actuator utilizes fine pitch ball screw and recirculating ball bearing guide. Ball tracks each have 4 contact points, providing dynamic load and moment capacities to 27 kN and 1,410 Nm respectively. Features include steel, U-shaped guide rail; ±0.01 mm positioning accuracy; and ±0.005 mm repeatability. Guiding surface, ground into steel body, eliminates...

Read More »
Gear Reducers offer hollow shaft mounting option.
Gearheads and Gearboxes

Gear Reducers offer hollow shaft mounting option.

Offering alternative to traditional helical shaft mounted reducers, Shaft Mounted Planetgear® Reducers feature modular design and interchangeable components. Self-aligning gear train has at least 6 teeth in contact per reduction to share load equally. Integral to low speed shaft, Hydro Advantage facilitates removal of reducer. Shaft mount configuration is available on Orion, Titan, Jupiter...

Read More »
Timing Belt Pulleys feature integral hub locking system.
Pulleys

Timing Belt Pulleys feature integral hub locking system.

Available with 15-120 grooves, A 6D51- (Inch) and A 6D51M (Metric) Series include 44, 2 mm pitch GT®2 pulleys made of clear anodized aluminum alloy. Fairloc® integral hub fastening design eliminates need for separate hub clamp devices, enables frequent position adjustment, and adds positive metal-to-metal fastening strength along entire hub surface. Designed for 6 mm belts, pulleys are...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers