Anti-Backlash Gears use Fairloc® integral fastening system.
Gears

Anti-Backlash Gears use Fairloc® integral fastening system.

Self-contained S1A5 and S1M5 Series feature built-in springs that force gear halves to turn in opposing directions relative to one another until tooth space between inner and mating outer gear is entirely filled. This provides automatic compensation for wear and thermal dimensional changes during life of gear train. Available in 303 stainless steel and 2024 aluminum, these 20° pressure...

Read More »
Hub Gears feature Fairloc® integral hub fastening system.
Gears

Hub Gears feature Fairloc® integral hub fastening system.

Comprised of 148 inch and metric hub (spur) gears, S1VS Series are supplied with 48, 32 and 24 Diametral Pitch and face widths from .197-.313 in. Self-contained, 20° pressure angle, AGMA QIO (ISO 7) Class gears are made from 303 stainless steel and fit shaft diameters from 1/8-3/8 in. Suggested clearance between bore and shaft is .0001/.0008 in., and sizes range from l4-120 teeth with ODs...

Read More »
Aluminum-Acetal Gears come in 24-72 diametral pitches.
Gears

Aluminum-Acetal Gears come in 24-72 diametral pitches.

Comprised of 84 models, S1268Z -...M Series combine noise reduction benefits of acetal rim gear teeth with strength of 2024 aluminum core assembled onto stainless steel hub. These 20° pressure angle, AGMA Q10 and ISO Class 7 gears incorporate Fairloc® integral hub fastening system, which eliminates marred shafts. Offered in sizes with 21-210 teeth and ODs from .958-4.083 in.,...

Read More »
Step Motor Systems offer basic step angle of 0.36°.
Motor Controllers and Drives

Step Motor Systems offer basic step angle of 0.36°.

RoHS-compliant Series CRK-M consists of 5-phase step motor and driver models, 8 with single shaft extension and 8 with double shaft extension. Basic step angle can be adjusted to achieve any 2-phase step motor step angles. Direct switchover from 2-phase microstep mode can be performed without having to change input pulses. Available frame sizes range from 1.10 in. with holding torque of 5.9...

Read More »
Timing Belt Pulleys feature integral hub fastening design.
Pulleys

Timing Belt Pulleys feature integral hub fastening design.

Made of clear anodized aluminum alloy, 3mm Pitch HTD® Series A 6D23 (inch) and Series A 6D23M (metric) are available in 10-44 grooves with bore sizes from .125-.250 in. and 3-6 mm. Outer diameters range from .346-1.624 in. and 8.8-41.4 mm. Fairloc® integral hub fastening design eliminates need for separate hub clamp devices and offers benefits of frequent position adjustment, while...

Read More »
Bearings withstand wet, dirty, hot, and cold environments.
Plain Bearings (Bushings)

Bearings withstand wet, dirty, hot, and cold environments.

Made of stainless steel and self-lubricating polymers, Radial Poly-Round® bearings are manufactured to directly interchange with industry-standard unmounted ball bearings. Products operate completely without grease at speeds up to 400 surface feet per minute, and materials are available that work at temperatures from -200 to +700°F. Self-lubricating properties minimize downtime and...

Read More »
Cutting Edge Ceramic Hybrid & Full Ceramic Bearings By Boca Bearings
Bearings

Cutting Edge Ceramic Hybrid & Full Ceramic Bearings By Boca Bearings

7/25/2006 Delray Beach, FL - Boca Bearings is proud to announce their new expanded range of Full Ceramic and Ceramic Hybrid ball bearings. Ceramic bearings are made of a highly manufactured ceramic, similar to the heat absorbing, super resilient tiles on the Space Shuttle. Ceramic is the perfect material for any application seeking to achieve higher RPM's, reduce overall weight or for extremely...

Read More »
Actuator suits applications requiring external guidance.
Actuators

Actuator suits applications requiring external guidance.

EGZ belt-driven modular linear actuator travels up to 10 m/sec for externally supported loads because carriage adjusts to prevent binding of carriage bearings. Lateral v-guides permit misalignment in external supports. Custom travel lengths up to 76.2 m are offered, and extrusions range in width/height from 30-80 mm with dynamic capacities from 180-1,800 N. Actuators provide framework for single...

Read More »
Slip Clutches feature mating option for hubless gear.
Clutches

Slip Clutches feature mating option for hubless gear.

Ranging from .63-3.00 in. dia x 1.05-2.30 in. long, spring-wrapped Series S9940Y accepts shafts from .1248 to 7/8 in. dia and features limit torque from 9-480 oz-in. Units can be used as tensioning mechanisms in film transports, tape drives, or coil winding equipment. For transmission overload protection, clutches serve as limit stop to prevent jam-up or sudden shock loads. Units operate...

Read More »
Pillow Blocks have self-lubricating, aluminum bearings.
Bearings

Pillow Blocks have self-lubricating, aluminum bearings.

Comprised of 54 pillow blocks, S61P_C and S61P_Z Series feature self-aligning, Frelon®-lined anodized aluminum bearings. They are available in inch and metric sizes designed to fit shafts from .250-1.25 in. and 8-30 mm. Open and closed models with precision and standard tolerances are available. Wear rates are affected by surface finish, shaft hardness, length of travel, contamination, and...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers