New Ratings Show REALI-SLIM® Bearing Life Often Much Longer than Previously Published

New Ratings Show REALI-SLIM® Bearing Life Often Much Longer than Previously Published

MUSKEGON, MICH. ... JANUARY 11, 2007 ... After extensive testing, KAYDON Corporation Bearings Division has introduced higher dynamic capacity ratings for its REALI-SLIM® thin-section bearings based on an improved calculation methodology developed specifically for thin-section bearings. These make bearing life projections more accurate and result in life projections for many REALI-SLIM® bearings...

Read More »
Nanomotion's DuraMotor Series: Productivity and Cleanliness in Demanding Motion Profiles

Nanomotion's DuraMotor Series: Productivity and Cleanliness in Demanding Motion Profiles

Nanomotion is proud to announce the upcoming release of the DuraMotor series, which provides superior levels of durability and reliability for a wide range of applications, including: -· Ambient, Vacuum and Ultra High Vacuum (UHV) operation -· Demanding move & settle profiles with high duty cycle -· High speed motion profiles The DuraMotor provides the utmost in durability through the use of...

Read More »

ArvinMeritor to Develop First Dual-Mode Heavy-Duty Diesel-Electric Drivetrain for Wal-Mart Transportation

TROY, Mich., Jan. 10 // -- ArvinMeritor, Inc. and Wal-Mart Transportation, Bentonville, Ark., have agreed to development of a dual-mode, diesel-electric drivetrain for a Class 8 tractor. The vehicle, which is believed to be the first dual-mode diesel-electric tractor prototype in development in North America, will be based on an International Class 8 ProStar tractor and powered by an engine...

Read More »

Roller Carriage eliminates need for multiple linear rails.

Featuring wide bearing plate and rail, Roller Carriage 3 can handle speeds up to 10 m/s and is suitable for any automation application requiring precise motion with cantilevered loads. Roller bearings are sealed and lubed for life, allowing unit to operate in harsh environments with very little maintenance. Plate has T-slots for mounting of fixtures or tooling, and preload can be changed by...

Read More »

Stepper Motor comes in miniature package.

With 12 mm external diameter and 17.2 mm long design, Series ADM1220 offers holding torque without current of 2.4 mNm and can achieve boost torque of 4.1 mNm. Motor offers 20 full steps per revolution in full step mode and is capable of microstep operation at speeds from 10-6,000 rpm. Able to be combined with gearhead and/or lead screw, series has 1.5 mm diameter output shaft and no axial...

Read More »

Brushless DC Motor suit automation applications.

Utilizing neodymium magnets, electronically commutated EC 16 motors are available in 3 versions: with hall sensors, with integrated electronics, or sensorless. Package is 0.63 in. in diameter x 2.2 in. long, not including shaft or cables, and weighs 2 oz. Specified over -4 to +212-

Read More »
Mini DC Gear Motor develops 48 oz-in. torque at 118 rpm.

Mini DC Gear Motor develops 48 oz-in. torque at 118 rpm.

Accepting any 12 Vdc source, 3.4 in. long Model MMP-TM30-12V GP-051 measures 30 mm in diameter and has 16 mm long flatted output shaft with 6 mm diameter. Mounting is accomplished with 4 face mount M3 threaded holes, equally spaced on 24 mm dia BC. Output is rated for 3.0 lb-in. continuous torque at 118 rpm and 8.3 lb-in. peak. Requiring 90 mA at 12 Vdc to generate full load torque, motor is also...

Read More »

Ingersoll Rand Introduces T480 Series Pneumatic Barring Motors

Annandale, NJ - March 7, 2006 - Ingersoll-Rand Company introduces the T480 Series pneumatic barring motors, making service work on 500 liter diesel engines and 1,000 liter gas engines easier and safer. Ingersoll Rand T480 Series pneumatic barring motors are lightweight (from 59 to 75 pounds) and portable, which allows the motors to be moved from engine to engine, or mounted permanently. Running...

Read More »

BorgWarner to Showcase All-Wheel Drive Expertise at 2006 SAE AWD Symposium

AUBURN HILLS, Mich., Aug. 21 -- BorgWarner's (NYSE: BWA) industry-leading capabilities in all-wheel drive (AWD) technology and vehicle dynamics will be spotlighted at the 2006 Society of Automotive Engineers AWD Symposium August 22 and 23, at the Transportation Research Center (TRC) in East Liberty, Ohio. OEMs all over the world, and the people who drive the vehicles they make, rely on the...

Read More »

GKN Produces Countertrack(TM) Propshafts for Chrysler Group

AUBURN HILLS, Mich., Dec. 19 -- GKN Driveline's new countertrack(TM) PX propshaft technology that provides weight-savings and fuel-efficiency benefits will be added next year as a running change to some versions of the Chrysler Group's 2007 model-year Dodge Ram and Dakota pickup trucks and Durango sport-utility vehicle. GKN Driveline's countertrack(TM) is the first major breakthrough in fixed,...

Read More »

All Topics