Actuators

Linear Actuator has miniature design.

Direct drive ServoTube linear actuator, Model STA11, enables mounting on 28 mm centers for multi-actuator designs. Built-in solid-state position sensor provides ±12 micron repeatability, eliminating external encoder and facilitating actuator installation. Able to perform millions of trouble-free operating cycles, unit is free of friction, wear, and inertia of rotary-to-linear conversion...

Read More »
Linear Actuators feature steel reinforced timing belt.
Actuators

Linear Actuators feature steel reinforced timing belt.

With acceleration at 20 m/sÂ-² and speeds up to 8 m/s, LCB Series includes external sliding guide with dry-film lubricant and changeable, low-friction sliding blocks. Along with high static load capacity to endure pressing forces at standstill, programmable devices offer short/medium/long carriages for optimized moment-load capacity. R/L drive orientation, single or double drive shaft type,...

Read More »
Lithium Batteries

Energizer® e(2)® Lithium® Partners with Target Chip Ganassi Racing with Felix Sabates

Reed Sorenson to Pilot Energizer e(2) Lithium Car in AutoClub 500 This Sunday ST. LOUIS, Feb. 23 -- This Sunday, February 25, Target Chip Ganassi Racing with Felix Sabates (TCGRFS) driver Reed Sorenson is set to pilot the limited edition No. 41 Energizer® e(2)® Lithium® car during this year's AutoClub 500 at the California Speedway in Fontana, California. The car will feature...

Read More »
AC Gearmotors feature closed or open fan-cooled design.
Motors

AC Gearmotors feature closed or open fan-cooled design.

Powered by 1/20 hp AC motors, parallel shaft Sharq 207 Series offers direct drop-in replacement for many OEM applications. Four standard models offer torque ratings from 42-113 lb-in. with 2-29 rpm output speeds at full load current of 1.3 A. Rated at 115 V/60 Hz, units employ shaded pole electric motors, with clockwise rotation as standard. Sharq 207 Series is also available with 1/10 hp open...

Read More »
Plain Bearings (Bushings)

Composite Bearings feature locking collar for secure fit.

Marathon® Composite Mounted Bearing Units are available with locking collar that promotes contact between bearings and shaft to provide fit resistant to slippage. Used in applications that have constant direction of rotation or experience frequent starts and stops, units incorporate corrosion-resistant insert bearings protected with ZMaRC® coating, double rubber lip seals, and...

Read More »
Bearings

Pump Bearings meet high thrust demands of ANSI style pumps.

Featuring double-row bearing design and contact angle of 40°, 3300 DNR Series is suited for pump applications characterized by high axial loads, high operating temperatures, and vibration. Machined brass cage helps optimize performance in heavy-duty and poorly lubricated conditions. Standard axial and internal clearance ranges promote load-sharing between 2 rows of balls for cooler...

Read More »
DC Gearmotor develops 124 lb-in. torque at 3.2 rpm.
Motors

DC Gearmotor develops 124 lb-in. torque at 3.2 rpm.

Able to accept any 12 Vdc source, Model MMP-TM55-90-12V GPk52-124 has 2.14 in. dia, measures 7.7 in. long, and has keyed output shaft of 12 mm dia x 25 mm long. Mounting is accomplished with 4 face-mount M5 threaded holes. Peak output of reversible gearmotor is 178 lb-in., and it only requires 1.0 A @ 12 Vdc to generate its full load torque. Motor windings for 24, 36, and 90 V are available, and...

Read More »
Motors

Step Motor combines multiple components in compact body.

Available in 3.41, 3.85, and 4.78 in. body lengths, SilverPak 23CE is comprised of integrated NEMA 23 high torque step motor, microstepping driver, intelligent controller, and optical encoder. It is capable of up to 294 oz-in. holding torque, depending on stack size of motor, and up to 3 A peak output current. Operating from +12-40 Vdc, product reaches speeds of 16.7 MHz. There are multiple fully...

Read More »
Engines

Rolls-Royce RR300 to Power New Robinson Helicopter

Rolls-Royce RR300 to Power New Robinson Helicopter ORLANDO, Fla., March 5 -- Rolls-Royce, the world-leading provider of power systems and services, will supply a new turboshaft engine to power Robinson Helicopter Company's new R66 rotorcraft, it was announced at Heli Expo. The new RR300 engine represents a major step forward in the helicopter industry by providing 300 shaft horsepower at takeoff,...

Read More »
Ge Energy's Jenbacher Biogas Engine Powers Cow Manure Methane-to-Energy Plant in India
Engines

Ge Energy's Jenbacher Biogas Engine Powers Cow Manure Methane-to-Energy Plant in India

GE's ecomagination-Certified Technology Generates Power and Heat, Reduces Emissions NEW DELHI, INDIA - February 20, 2007 - A GE Energy Jenbacher biogas engine is powering a successful demonstration cattle manure-methane cogeneration plant at a large dairy complex in India's northwestern state of Punjab, helping to address the region's mounting energy and environmental needs. The Jenbacher biogas...

Read More »

All Topics