Stepper Motors are available in hollow shaft versions.
Motors

Stepper Motors are available in hollow shaft versions.

Hollow shaft versions of h3 stepper motors allow wires or other media to be routed through motor shaft. With neodymium iron boron magnets to optimize torque density and bearing retainer/o-ring to help minimize motor noise, 1.8° step motors also feature aluminum housing for maximized heat dissipation and minimized power consumption. They are offered in NEMA 17, 23, and 34 frame sizes, with...

Read More »
Motor Controllers and Drives

Motors and Speed Control suit continuous-duty applications.

Available in 24A and 33A frame motor sizes, 12 V PMDC Gearmotors and Motors can be built in combination with parallel shaft, hollow shaft, or right-angle gearheads with gearmotor output speeds from 5.6-660 rpm. Units range from 1/50-1/8 hp and can generate up to 310 lb-in. torque. Pulse-width-modulated Type WPM-12 Vdc Speed Control is suited for battery-powered, solar-powered, and other...

Read More »
Motor Controllers and Drives

Variable Speed DC Drives comply with ROHS directive.

Unfiltered type UPM DC motor speed controls target PMDC gearmotors/motors operate from 115/230 Vac and offer output voltages from 0-90 Vdc at 115 Vac and 0-180 Vdc at 230 Vac, at 50/60 Hz input voltage. Offering PWM control, filtered type WPM DC motor speed controls operate from 115 Vac at 50/60 Hz line and provide output of 0-130 Vdc. Both feature 8 DIP switches and Â-¼ in. quick connect...

Read More »
Motor Controllers and Drives

ABB Wins Order for Penasquito HPGR Project

ACS1000 variable speed drive system will efficiently power High Pressure Grinding Rolls at the Peñasquito ore grinding plant in Mexico Baden, Switzerland, February 23, 2009 - ABB, the leading power and automation technology group, announced that it has signed a contract with Polysius Corporation USA for the Penasquito High Pressure Grinding Rolls (HPGR) extension project. The Peñasquito...

Read More »
Bearings

Polymer Ball Bearings feature high-temperature design.

Made with iglide® A500 races and cage, which offers chemical resistance, Xiros Ball Bearings feature stainless steel, corrosion-free balls. Deep-groove bearings are available for varying shaft diameters and are temperature-resistant up to 302°F. Dry-running, lubrication-free units are suited for medical engineering, chemical, food, pharmaceutical, biotechnology, and plant engineering.

Read More »
Linear Motors feature modulated gas control.
Motors

Linear Motors feature modulated gas control.

Integrating motor and valve, Linear Motor Series provides proportional control of gas flow for energy-efficient gas heating. Synchronous model provides 10 mm displacement at 115 V, linear step speed of 0.833 or 1.67 mm/sec, and output force of 27-45 N. Featuring dual safety system, 2 stepper-based models incorporate -7.5° and -15° step angle, linear step displacement of 0.0167 and...

Read More »
Coaxial-Drive Planetary Gearhead offers low-noise operation.
Gearheads and Gearboxes

Coaxial-Drive Planetary Gearhead offers low-noise operation.

Featuring OD of 32 mm, Koaxdrive KD 32 combines worm and planetary gearing, with worm-formed motor pinion driving 3 offset planetary wheels interlocking with internal gear. Plastic planetary wheels allow for minimized noise and coupling element is assembled on motor side so shaft is not subjected to axial load. Many reduction ratios are available in 11:1 to 1091:1 range and gearhead provides...

Read More »
Linear Actuator targets high speed and load applications.
Actuators

Linear Actuator targets high speed and load applications.

Belt-driven PLB actuating system includes Integral V(TM) guided cam rollers and steel raceways to guide rollers. Rolling system provides accuracy to within 0.1 mm/m and supports steel-reinforced belt for 10 m/sec speed and high-acceleration travel. Composed of anodized aluminum, outer housing of PLB also tolerates corrosive environments. Optional dual carriage design, clamps, limit switches, and...

Read More »
K2x Linear Actuators Optimized for Special Applications
Actuators

K2x Linear Actuators Optimized for Special Applications

Warner Linear, Belvidere, IL, has recently optimized its BTrack family of rugged-duty electric linear actuators for two new customer applications requiring capabilities to withstand harsh environmental conditions. To meet the demanding requirements of the construction industry, Warner Linear engineered a new, bi-directional mechanical clutch that allows the K2x type actuator to raise the dump box...

Read More »
Motors

Genteq(TM) Unveils World's First 460V X13 Motor

BELOIT, Wis., Feb. 27 / / - Genteq(TM), a division of Regal Beloit Corporation (NYSE:RBC), has unveiled the latest addition to its family of proven ECM products: the 460V X13 motor. Genteq understands that the light commercial industry has been looking for a motor that will bring high efficiency to their specific applications," said Paul Selking, HVAC industry leader at Regal Beloit. "The 460V...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers