Wind Turbine derives energy from low-/medium-speed wind.
Turbines

Wind Turbine derives energy from low-/medium-speed wind.

Featuring 101 m rotor diameter and swept area of 8,000 mÂ-², SWT-2.3-101 is designed to derive power from low and medium wind speeds. This 2.3 MW wind turbine is equipped with 49 m rotor blades, which are cast in one-piece in closed process that eliminates any weaknesses associated with glue processes. Rugged structural design, automatic lubrication systems, internal climate control, and...

Read More »
Turbines

DONG Energy and Siemens Announce the Largest Offshore Wind Turbine Supply Agreement in History

Erlangen, Germany, March 6, 2009 Siemens to supply up to 500 wind turbines to DONG Energy's coming offshore wind farms in Northern Europe. Today DONG Energy and the Siemens Energy Sector signed an agreement for the supply of up to 500 offshore wind turbines. The wind turbines to be delivered under the supply agreement have total capacity of up to 1,800 megawatts, and will be deployed on DONG...

Read More »
High Cycle Clutch/Brake
Clutches

High Cycle Clutch/Brake

MP units are made for every quick and precise cycling applications. Units include a low voltage clutch and a brake to start and stop a load. All units maintain a consistent air gap, even thought units wear, which controls engagement time.

Read More »
Linear Motors promote gas heating efficiency.
Motors

Linear Motors promote gas heating efficiency.

Through proportional control of gas flow, Linear Motor Series encourages energy-efficient gas heating control. Modulation of dispensed gas enables fuel to be burned at slower/faster rate as needed, promoting burning efficiency while minimizing expenditure and pollution. Packaged as integrated assembly with motor and valve, series also integrates dual safety system that lets motor switch off valve...

Read More »
Electromagnetic Brakes are designed for wind turbines.
Brakes

Electromagnetic Brakes are designed for wind turbines.

Electrically-released, spring-engaged brakes of ERS series serve as pitch brakes for wind turbine applications that require both static holding power and ability to withstand high inertia dynamic stops in emergency situation. Each electromagnetic brake is mounted outboard of inductive encoder, which is mounted to back of motor to position blades to proper pitch. Largest model, ERS68, has capacity...

Read More »
Grip Conveyor Chains ensure gentle handling.
Chains

Grip Conveyor Chains ensure gentle handling.

Grip chains with clamping elements are used for gripping, collecting, and transporting thin-walled, large-surface materials in packaging, food/beverage, and electronics industries. Adjustable spring force ensures sensitive materials are handled gently during processing to avoid damage, while swivel arrangement ensures optimal feeding and precise positioning. Available as simplex and duplex chain...

Read More »
Engines

Fuel Injection Engines feature electronic control unit.

Available in 653 or 720 cc configurations, EH72 V-Twin and EH72 UTV deliver outputs from 20-27 hp, suitable for welders, generators, pressure washers, and lawnmowers. Engines feature 2-barrel manifold with fuel injector for each cylinder, allowing cylinders to operate independently of each other. Using sensors to detect manifold pressure, ambient temperature, and throttle position, Electronic...

Read More »
Stepper Motors are available in hollow shaft versions.
Motors

Stepper Motors are available in hollow shaft versions.

Hollow shaft versions of h3 stepper motors allow wires or other media to be routed through motor shaft. With neodymium iron boron magnets to optimize torque density and bearing retainer/o-ring to help minimize motor noise, 1.8° step motors also feature aluminum housing for maximized heat dissipation and minimized power consumption. They are offered in NEMA 17, 23, and 34 frame sizes, with...

Read More »
Motor Controllers and Drives

Motors and Speed Control suit continuous-duty applications.

Available in 24A and 33A frame motor sizes, 12 V PMDC Gearmotors and Motors can be built in combination with parallel shaft, hollow shaft, or right-angle gearheads with gearmotor output speeds from 5.6-660 rpm. Units range from 1/50-1/8 hp and can generate up to 310 lb-in. torque. Pulse-width-modulated Type WPM-12 Vdc Speed Control is suited for battery-powered, solar-powered, and other...

Read More »
Motor Controllers and Drives

Variable Speed DC Drives comply with ROHS directive.

Unfiltered type UPM DC motor speed controls target PMDC gearmotors/motors operate from 115/230 Vac and offer output voltages from 0-90 Vdc at 115 Vac and 0-180 Vdc at 230 Vac, at 50/60 Hz input voltage. Offering PWM control, filtered type WPM DC motor speed controls operate from 115 Vac at 50/60 Hz line and provide output of 0-130 Vdc. Both feature 8 DIP switches and Â-¼ in. quick connect...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers