Brake Management System targets agricultural machines.
Brakes

Brake Management System targets agricultural machines.

Based on electrically variable pumps, zero displacement motors, and intelligent control electronics, Hydrostatic Brake Management System prevents diesel engine from overspeeding. Braking algorithm, which is stored in BODAS controller, moves pump back instantly when pressure is applied to brake pedal, reducing geometric displacement of pump accordingly. Pressure-relief valves fitted to all...

Read More »
ARRA Compliant Electric Actuators Control Valves and Dampers
Actuators

ARRA Compliant Electric Actuators Control Valves and Dampers

Harold Beck and Sons, Inc. of Newtown, Pa announces all its electric actuators for industrial process control meet the requirements of the American Recovery and Reinvestment Act (ARRA) Buy American" mandate. Beck drives are designed for modulating control of control valves, dampers and many other final control elements. The unique design incorporates a no duty cycle motor and requires little or...

Read More »
Traction Control boosts efficiency of mobile machinery.
Miscellaneous Drives

Traction Control boosts efficiency of mobile machinery.

Developed for hydrostatic travel drives, electrohydraulic Model ASR uses A4VG-type, electrically adjustable, variable-displacement axial-piston pump and 4 electrically adjustable, fully de-strokeable A6VE-type axial-piston motors. Electric signal for hydrostatic brakes is generated by LT07 brake pedal, which also controls dynamic multi-disk brake in GFT13/17 gearbox. System minimizes wheelspin...

Read More »
Actuators

Linear Acuators deliver 50 lb of thrust.

Occupying 1.4 in. square space, 35000 Series Size 14 Linear Actuators are available in resolutions from 0.000625-0.005 in. per step. Double stack non-captive units include stainless steel precision leadscrew and proprietary nut design integrated directly within motor. Actuators are suited for applications where stroke of more than 20 in. is needed, including linear stages, X-Y stages, and other...

Read More »
Air / Gas Compressors

News from GE Oil & Gas: Riding a Pacific Wave of Deals

It's been a busy summer for GE Oil & Gas across the Asia-Pacific region. Today, the team is gathering in Singapore to map out next steps as part of their annual mid-year business review and to kick-off a tour of key customer sites across the region. We thought it would be a good time to take a look at just what Oil & Gas has been up to in recent weeks. In the heavy equipment category, GE recently...

Read More »
Plain Bearings (Bushings)

Bearings suit high-frequency oscillating applications.

Model DP11(TM) PTFE-based, metal-polymer plain bearings optimize dry wear performance in high-frequency, low-amplitude oscillating applications. Units feature steel backing, onto which porous bronze interlayer is sintered, in turn which is impregnated/overlaid with bearing layer composed of PTFE with solid lubricant and fillers. Featuring operating temperature range of -200 to +280°C,...

Read More »
Compact 24 Vdc Gearmotor develops 410 lb-in. torque @ 15 rpm.
Motors

Compact 24 Vdc Gearmotor develops 410 lb-in. torque @ 15 rpm.

Measuring 2.24 in. dia x 7.75 in. long, MMP-TM55-24V GP57-317 reversible gearmotor has 12 mm dia x 25 mm long keyed output shaft and gearhead efficiency of 90%. Mounting is accomplished via 4 face mount M5 threaded holes, and variable-speed operation is supported. Able to generate up to 1,000 lb-in. peak, this IP54 gearmotor is available with 12, 36, 48, 60, and 90 V windings are available. Areas...

Read More »
Serapid Provides Linear Motion Application Solutions for Robotics Company
Actuators

Serapid Provides Linear Motion Application Solutions for Robotics Company

An Automotive Supplier recently turned to SERAPID for a special system, custom-design to their exact specifications. This allows the company to change part production with virtually no downtime. The SERAPID Tool Transfer table uses a LinearBeam mechanical linear actuator to move two tooling fixtures. The table provides a 7th axis for the robot cell, and uses an encoder to monitor positions. The...

Read More »
OPC Magnetic Particle Clutch - Magnetic Particle Clutches Provide Accurate Torque
Controls and Controllers

OPC Magnetic Particle Clutch - Magnetic Particle Clutches Provide Accurate Torque

Ogura's line of small magnetic particle clutches provides accurate torque control through providing five different model clutches that have an overall torque range from .1 - 71 in. lbs. All five models come with a built in flange for easy mounting and have built in support bearings with good side load capability for both the input and output sections of the clutch. Because of their precise...

Read More »
Axles

Hendrickson's STEERTEK Named the Standard Front Steer Axle on International® ProStar® and TranStar® Truck Models

WOODRIDGE, Ill. - Hendrickson Truck Suspension Systems officials announce the innovative, weight saving STEERTEK front steer axle is now standard on International® ProStar® and TranStar® vehicle models. STEERTEK, the first fabricated front steer axle in the industry, became the standard offering on the International® LoneStar® model in 2008. Based on proprietary...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics