New Modular Adapter Kit from Thomson Industries, Inc. Simplifies Motor and Gear Installation
Adapters

New Modular Adapter Kit from Thomson Industries, Inc. Simplifies Motor and Gear Installation

Thomson Industries, Inc.’s new RediMount option is a pre-engineered, modular adapter kit for seamlessly installing motors or gears in less than five minutes. It works with a wide range of motor types and sizes or gears, allowing it to be mounted to linear motion systems and actuators faster and with less effort than ever before. It also includes updated smart part numbers with a specific motor...

Read More »
Moticont Offers Latest Direct Drive Linear Motors with Linear Optical Quadrature Encoder
Motors

Moticont Offers Latest Direct Drive Linear Motors with Linear Optical Quadrature Encoder

The SDLM-051-095-01-05 High Speed Direct Drive Linear Motor is available in 50.8 mm diameter and 95.3 mm length. The motor features a 25.4 mm stroke and a resolution of 5 microns. It is coupled directly to the load for high acceleration and high speed with zero cogging and backlashes. The product comes with continuous force rating of 33.9 N and a peak force of 107.2 N at 10% duty cycle. It is...

Read More »
Engines

Royal Dutch Touring Club ANWB Selects Pratt & Whitney Canada Engines for EMS Fleet Renewal

AMSTERDAM, the Netherlands, Oct. 17, 2018 (GLOBE NEWSWIRE) -- Pratt & Whitney, a division of United Technologies Corp. (NYSE: UTX), today announced that Royal Dutch Touring Club ANWB has selected Pratt & Whitney Canada’s PW206B3 engine to power the three new Airbus H135P3s, the club is acquiring to renew its fleet of emergency medical services (EMS) helicopters. “The twin-engine Airbus H135...

Read More »
Engines

Honeywell Engines to Power Embraer's Latest Executive Aircraft Models

Embraer Praetor 600 and Praetor 500 aircraft to be equipped with Honeywell's HTF7500E engine ORLANDO, Fla., Oct. 14, 2018 /PRNewswire/ -- Honeywell (NYSE: HON) engines will power two Embraer aircraft models revealed today at the National Business Aviation Association 2018 event. The engines bring a combination of best-in-class reliability, enhanced dispatchability, reduced noise and...

Read More »
New Gearmotors Feature a Rated Maximum Armature Speed of 2500 RPM
Motors

New Gearmotors Feature a Rated Maximum Armature Speed of 2500 RPM

The SCR Rated PMDC Gearmotors from Bodine Electric Company is a new selection of 90V and 180V DC gearmotors. They are available in 70 standard models and they all feature Class F TENV insulation and a rated maximum armature speed of 2500 rpm. The gearmotors were designed for hybrid applications that don’t match the industry standard for operation with unfiltered speed controls of 90V and 1725...

Read More »
Latest ServoStep Integrated Stepper Motors Come with Six Industrial Protocols
Motors

Latest ServoStep Integrated Stepper Motors Come with Six Industrial Protocols

The ServoStep Integrated Stepper Motors (MIS171 to MIS176) are offered with absolute multiturn encoder, closed loop and M12 connectors. The units deliver a resolution of 409600 cnt/rev. and speeds ranging from 0-3000 in 0.01RPM steps. They come with built-in encoder for closed loop and stall detection and control. The stepper motors can be operated as stand-alone units or controlled using PLC or...

Read More »
Actuators

Second Stage of Smart Electric Valve Actuator (SEVA) Has Been Released by Badge Meter for Additional Connectivity

Badge Meter has released the second stage of their Smart Electric Valve Actuator (SEVA). The acutator now offers Modbus RTU, Modbus TCP/IP, and SoloCUE connectivity. Combined with SoloCUE, the acutuator allows users to adjust operating speed and thrust, set up operation limits, and configure real-time dashboard to communicate position command, actuator position, signal applied, internal...

Read More »
Latest ETP Shaft Locking Bushings Offer Precise Connection Between Shaft and Hub
Plain Bearings (Bushings)

Latest ETP Shaft Locking Bushings Offer Precise Connection Between Shaft and Hub

The ETP Shaft Locking Bushings are offered in 15 through 100 mm in various shaft inch sizes and can handle torques ranging from 46 to 17,000 Nm. The bushings with single screw allow user to quickly mount, reposition and phasing of the components to shafts. The hydraulic design of the bushings provides even and full contact pressure around the circumference of the bushing. The unit locks securely...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers