Expanded Line of Heavy-Duty Actuators for Quarter-Turn Valves and Dampers Offers Higher Torque - 1,600,000 in.-lb - With Reduced Cost
Actuators

Expanded Line of Heavy-Duty Actuators for Quarter-Turn Valves and Dampers Offers Higher Torque - 1,600,000 in.-lb - With Reduced Cost

Modular engineering and dozens of options ensure suitability for any application in temperature extremes or -40° to 177°C September 2009 - A-T Controls' expanded line of Triac THD heavy-duty scotch yoke actuators is engineered for the most demanding liquid and air handling applications, powering quarter-turn dampers and valves with up to 1,600,000 in. lbs. (180,800 nm) torque. Optimized...

Read More »
Fixed Jaw Gripper provides zero point part pick-up/placement.
Actuators

Fixed Jaw Gripper provides zero point part pick-up/placement.

Featuring height of 0.813 in., AGPS parallel gripper features 1-piece body and stationary jaw design, integrated with precision T-slot bearing design supported full length of body. It features aluminum base and carriage bearing manufactured from Ampco 18 aluminum-bronze. Providing grip force of 15-25 lb, mini-linear actuator gripper is offered with bore sizes of .5 and .75 in. available in .5,...

Read More »
Right Angle EG Planetary Gearheads deliver diverse options.
Gearheads and Gearboxes

Right Angle EG Planetary Gearheads deliver diverse options.

Offered in NEMA 17/23/34/42 sizes, each with 13 gear ratios from 3:1 to 100:1, S91xxSREGxx Series features planetary system and case-hardened spiral bevel gears. Products are sealed to extend service life and offer single and double stage designs with respective minimum efficiencies of 85% and 80%. Operating from -40 to +225°F, series has precision balanced clamp-on pinion, max input speed...

Read More »
DC Gearmotor develops 9.5 lb-in. torque at 675 rpm.
Motors

DC Gearmotor develops 9.5 lb-in. torque at 675 rpm.

Accepting any 24 Vdc source, including battery power, Model MMP-TM55-24V GP57-007 measures 2.24 in. dia x 6.7 in. long with keyed output shaft measuring 12 mm dia x 25 mm long. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C. Requiring 3.6 A at 24 Vdc to generate full load torque, reversible gearmotor is IP54-rated for harsh environments and suited...

Read More »
Gear Drives Offering Strain Wave Gearing
Gearheads and Gearboxes

Gear Drives Offering Strain Wave Gearing

The World's Largest Manufacturer of Harmonic Drive Gearing allows Harmonic Drive, LLC. To offer the machine and motion control design engineers the widest choice of strain wave gearing products. A complete line and range of rotary servo actuators are available for AC and DC applications. These servo actuators are easy to use and offer quick implementation. They are compatible with most...

Read More »
Patent Awarded to Bishop-Wisecarver for New Dualvee® Washdown Wheels
Bearings

Patent Awarded to Bishop-Wisecarver for New Dualvee® Washdown Wheels

Third DualVee Patent is Granted for Life Extending Design Pittsburg, CA - - August 19, 2008 - - Bishop-Wisecarver Corporation, manufacturer of the original DualVee® guide wheel and industry leader in guided motion technology, announced today that it has been awarded a third U.S. Patent by the U.S. Patent and Trademark Office (USPTO) for its latest technological development of a washdown wheel...

Read More »
New 1200 and 3600 RPM General Purpose Motors from AutomationDirect®
Motors

New 1200 and 3600 RPM General Purpose Motors from AutomationDirect®

Cumming, GA - August 5, 2009 - AutomationDirect has extended its IronHorse general purpose AC motor line to include 3-phase 1200 RPM six-pole and 3600 RPM two-pole models. Six new 56C 3600 RPM rolled steel motors are now available, ranging from 0.33 to 2 HP; 13 new T-frame cast iron motors in 3600 and 1200 RPM models are available in sizes from 1 to 10 HP. These TEFC motors have 5:1 variable...

Read More »
Electric Clutches for Gas and Diesel Engines
Clutches

Electric Clutches for Gas and Diesel Engines

Ogura electromagnetic clutches can handle the torque and speed requirements of most small to midsize gas and diesel engines up to around 40hp. Clutches can handle engine shaft sizes 1 , 1 1/8", 1 Â-¼" and 1 7/16". Since clutches are made to mount right onto an engine shaft they can take the vibration and temperature from small gas or diesel engines. Clutches can then either drive customer's...

Read More »
Piezo Controller offers optical path control, beam steering.
Controls and Controllers

Piezo Controller offers optical path control, beam steering.

Intended for piezo-based steering and stabilization mirror platforms, E-616 multi-axis controllers are offered in 4 open and closed-loop models as bench-top and OEM module versions. Closed-loop units contain 2 servo controllers, sensor circuit channels, and 3 power amplifiers that provide up to 10 W peak power. Internal coordinate transformation simplifies control of parallel kinematics designs,...

Read More »
NSK Precision America Announces Availability of PNP Output Type Sensor on Linear Actuators
Actuators

NSK Precision America Announces Availability of PNP Output Type Sensor on Linear Actuators

Franklin, Indiana, August 25, 2009 - NSK Precision America has announced that it now offers two types of photo sensor kits for use with its MCM and MCH Monocarrier linear actuators. The expansion was made to increase the applicability of the company's product line across a broader array of applications. The variety of sensor types available for NSK's Monocarrier lines now includes PNP output...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers