Siemens to Supply Key Power Plant Components to Industrial Customer in Mexico
Switchgear

Siemens to Supply Key Power Plant Components to Industrial Customer in Mexico

• Largest private cogeneration project to date for Siemens in Mexico Siemens has received an order to supply an H-class gas turbine, one SST-800 steam turbine and two associated generators as well as four switchgear units for the Altamira combined cycle cogeneration power plant in Mexico. The entire power plant will have an electrical capacity of around 350 megawatts (MW) and will also provide...

Read More »
Turbines

Siemens to Supply 64 Wind Turbines for 147 MW Onshore Project in the U.S.

• 64 SWT-2.3-108 for Grant Plains Wind in Oklahoma • Clean renewable energy for more than 50,000 U.S. households • Long-term service included Siemens has received an order to supply, install and commission 64 onshore wind turbines for the onshore Grant Plains Wind project in Oklahoma. The customer is Apex Clean Energy. The wind power plant with a total capacity of 147 megawatts (MW) will...

Read More »
Motors

CM-ET Lodestar Classic Electric Chain Motor Now IP66 Rated

Legendary motor is ideal for use in outdoor environments and is designed for long service life GETZVILLE, N.Y. – As part of our dedication to providing customers with the best products and services in the industry, Columbus McKinnon Corporation (NASDAQ: CMCO), a leading designer, manufacturer and marketer of material handling products, systems and services, has made significant improvements to...

Read More »
Actuators

Assured Automation NV Series Actuator Recognized in Best of the Best 2016 Best Practices Award

NV Series Replaces obsolete belt-driven valve actuators with gear-style design actuator at less than 10% of the cost of OEM's replacement option CLARK, N.J., Aug. 29, 2016 - Much of our electricity is generated by gas turbines, internal combustion (IC) engines that produce power by burning air-fuel mixtures that throw off hot gases which in turn spin the turbines. The Combined Cycle Journal...

Read More »
Shaft Couplings Buying Guide
Sponsored

Shaft Couplings Buying Guide

Do you need a disc, gear, grid, or jaw shaft coupling? If you're unsure the exact type of shaft coupling to use for your project, download the shaft coupling buying guide prepared by ThomasNet. Learn about the different applications each shaft coupling is used for.

Read More »
Controls and Controllers

HEIDENHAIN to Offer Daily Motion Control Presentations at IMTS Booth -See Schedule Online Here - http://www.heidenhain.us/wp-content/uploads/TakeTen.pdf

SCHAUMBURG, IL – Bringing its international expertise in the area of motion control to the International Manufacturing Technology Show (IMTS) in Chicago’s McCormick Place (Sept. 12 – 17), HEIDENHAIN CORPORATION will offer five different concise presentations covering the latest in manufacturing technology at their booth (#E-5226) each day of the show.Â-  Each presentation will last a...

Read More »
Mersen Proudly Sponsors University of Washington for Ecocar3 Competition
Electrical Boxes

Mersen Proudly Sponsors University of Washington for Ecocar3 Competition

The EcoCAR 3 Advanced Vehicle Technology Competition challenges sixteen North American university teams to redesign a 2016 Chevrolet Camaro to reduce its environmental impact, while maintaining the muscle and performance expected from this iconic American car. Teams are tasked with enhancing the vehicle with cutting-edge energy efficient powertrains that retain high standards for safety and...

Read More »
Linear Actuator utilizes all-steel drive pinion.
Actuators

Linear Actuator utilizes all-steel drive pinion.

Featuring 5:1 reduction ratio, 12 Vdc Model MMP LA3-12V-5-A-SP-100 maintains rapid 2 ips stroke speed and 4 in. overall stroke length. Acme screw drive allows for 517 lb of static load, while unit boasts 45 lb dynamic load rating. Operating from -26 to +65°C, IP65-rated actuator features 8 mm diameter clevis mounts on both ends and built-in limit switches for both ends of travel. Typical...

Read More »
Benders

CINCINNATI to Launch New Fiber Laser and Portable Electric Press Brake at FABTECH 2016

AUGUST 23, 2016; HARRISON, OH; USA - Cincinnati® Incorporated (CI) a leading provider of built-to-order machine tools, announces its participation as an exhibitor at FABTECH 2016 (November 16-18, Las Vegas, NV). Located in booth C31102 in the Central Hall of the Las Vegas Convention Center, the exhibit will feature the company’s latest product lines - the CL-960 fiber laser, the MAXFORM...

Read More »
Engines

U.S. Army Selects ATEC to Design Dramatically Improved Helicopter Engine for Black Hawk and Apache Fleets

HUNTSVILLE, Ala. - The U.S. Army has announced that the Advanced Turbine Engine Company (ATEC), a joint venture of Honeywell and Pratt Whitney, has been awarded a contract for preliminary design review of a new engine for the Army's fleet of Black Hawk and Apache helicopters. The two-year contract, part of the Army's Improved Turbine Engine (ITE) program, will support the design of an...

Read More »
Durable Truck Suspension/Steer Axle conserves weight and fuel.
Vehicle Suspensions

Durable Truck Suspension/Steer Axle conserves weight and fuel.

As available option for Peterbilt 579 and 567 set forward axle models,Â- SOFTEK® NXT integrated monoleaf suspension and steer axle system combines STEERTEK NXT axle and monoleaf spring technology with integrated clamp group design. Design conserves weight, promotes ride quality and durability, and facilitates maintenance. Axle, with 2-piece knuckle...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics