Crossed Helical Gears are available to application demands.
Gears

Crossed Helical Gears are available to application demands.

Available from sizes 0.5-3.0 Module, 45Â-º crossed helical gears feature right hand helix that runs with another right hand helix. Gears are manufactured to Quality Grade 7e25 DIN 58405 (AGMA Q10), and other Quality Grades are available upon request. While standard materials are 817M40T (28 HRC) steel and 805M20 (58 HRC) case hardened steel, customer-specific options include tapped holes,...

Read More »
Double Brake Design improves commercial elevator safety.
Brakes

Double Brake Design improves commercial elevator safety.

Double MNB brake for commercial elevators consists of 2 identical brakes mounted on one adaptor flange. Since brakes are holding only, both operate simultaneously when required to come on. If problem occurs with one brake, other can still handle torque load required. Both brakes are equipped with limit switches to know when brake is either engaged or disengaged. Product helps meet demands in...

Read More »
Linear Actuators have low-profile narrow positioning stages.
Actuators

Linear Actuators have low-profile narrow positioning stages.

Model LSMA-175 precision linear actuators feature compact, fully-enclosed stages that measure 25 x 50 mm. Stages have travel ranges between 50 and 200 mm, with positioning repeatability of 0.31 micron, and maximum speed of 10 mm/sec with 8 kg payload. Micrometer-grade screw with lead pitch of 0.5 mm, miniature linear bearing, and non-contact limit switches with stepper or DC servo motor are...

Read More »
Autodisconnect Clutches require no external actuation.
Clutches

Autodisconnect Clutches require no external actuation.

AD-Series Tiny-Clutch® purely mechanical automatically disconnecting clutch, available for loads up to 100 in./lb and with bores up to Â-½ in., suits applications such as coil/spool winding, film drives, or any similar application requiring automatically free wheeling clutch. When Torque is applied to input hub, clutch engages, and output sleeve is driven one way. When torque is...

Read More »
Single-Axis Linear Actuator achieves speed to 200 mm/sec.
Actuators

Single-Axis Linear Actuator achieves speed to 200 mm/sec.

As motorized ball-screw carriage guided by linear bearing, BSMA-058 has aluminum stage base supplied with dust-proof strip to prevent particle ingress/egress. Single or double carriage versions are available, stroke ranges from 050-600 mm, and repeatability is 5 microns. Suited for high-speed single-axis or multi-axis motion automation application, actuator is offers 2.5 and 5 mm ball screw...

Read More »
Engine Bearings minimize fuel consumption and CO2 emissions.
Plain Bearings (Bushings)

Engine Bearings minimize fuel consumption and CO2 emissions.

Featuring polymer coated bearing shell, IROX(TM) Bearings withstand mechanical loads produced by heavily boosted engines. Overlay addresses lubrication challenges associated with frequent engine re-starts by protecting crankshaft and bearing shells from damage where metal-to-metal contact would otherwise occur. PolyAmideImide polymer resin binder contains additives dispersed throughout matrix,...

Read More »
Siemens Energy to Supply Power and Heat for the Winter Olympics in Sochi
Turbines

Siemens Energy to Supply Power and Heat for the Winter Olympics in Sochi

Erlangen, Germany - Siemens is to contribute to the success of the 2014 Winter Olympics in the Russian city of Sochi by implementing several energy projects worth a total of more than EUR125 million. Siemens Energy has supplied gas and steam turbines to the local utility Sochinskaya TES, which will ensure power and heat supply for athletes and visitors at the 2014 Winter Olympics. Gas and steam...

Read More »
Dortronics Reaffirms Strength of Product Line at ISC West 2010.
Controls and Controllers

Dortronics Reaffirms Strength of Product Line at ISC West 2010.

Commitment to Efficient and Reliable Door Control Solutions Highlighted by Introduction of New 2010 Product Brochure. Las Vegas, NV - Today at ISC West 2010, Dortronics Systems, Inc. is showcasing their extensive line of door control solutions for the alarm and security marketplace. Along with the introduction of their new 4700 Series Mantraps, Dortronics is highlighting specialty products that...

Read More »
All Steel Metric Rod End Bearings from Aurora Bearing Co.
Bearings

All Steel Metric Rod End Bearings from Aurora Bearing Co.

Aurora Bearing Company's CM-M and CW-M series metric male and female rod end bearings feature a 1 piece steel race way, machined integral to the steel body, cold formed around a chrome plated, alloy steel ball for strength, precision and structural integrity. Their superior design and materials specifically address a common failing in economy grade metric rod ends bearings built to DIN ISO...

Read More »
Integrated Servo Motors include absolute encoders.
Motors

Integrated Servo Motors include absolute encoders.

Integrated servo motor Models MAC400 and MAC800 are available with built-in absolute multi-turn encoders, offering multi-turn resolution of ±2,048 whole turns, and single-turn resolution of either 8,000 or 8,192, which is software-selectable. Motors will remember their positions while powered off, eliminating zero search operation on start up. Full absolute encoder position is available at...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics