Moving Coil Actuator exhibits extended cycle life.
Actuators

Moving Coil Actuator exhibits extended cycle life.

Designed to replace pneumatic cylinders in positioning/measuring applications, LCA series includes 1- and 3-coil versions which respectively generate 10 and 30 N and offer accelerations exceeding 40G. Model LCA25 occupies 25 x 50 mm footprint, and length depends on stroke, which can vary from 10-100 mm with encoder resolutions from 20 micron to 50 nm. Slide option is available for scanning...

Read More »
Turbines

EWE Places Order for German Offshore Wind Farm with Siemens

Siemens Energy has been contracted by EWE AG and ENOVA GmbH & Co KG to supply 30 wind turbines for the Riffgat wind farm in the North Sea. With a total installed capacity of 108 megawatts (MW) the wind farm will supply approximately 100,000 German households with ecofriendly electricity starting in late 2012. Siemens has received an order from the Oldenburg-based utility EWE and the ENOVA Group...

Read More »
Compact Linear Voice Coil Actuators integrate position sensor.
Actuators

Compact Linear Voice Coil Actuators integrate position sensor.

Offering solution for those requiring actuator with integrated position sensor in compact package, LAS13 Series can be used in various positioning and force control applications. There are 4 models that offer 6 mm total stroke and 15.5 N peak force in 1.3 in. dia x 1.8-1.1 in. long packages. For application flexibility, models are available in fully and semi-housed versions as well as one version...

Read More »
Explosion-Proof Servomotors survive hazardous environments.
Motors

Explosion-Proof Servomotors survive hazardous environments.

Comprised of UL-Listed permanent magnet servomotors, EX series is designed for use in hazardous atmospheres. Explosion-proof housings make motors capable of bearing internal explosions without risk of propagation to neighboring environment. Offered in 2 versions allowing compliance with North American (UL) or European (ATEX) safety standards, series is based on 10-pole design and available with...

Read More »
Right Angle Gearmotors offer 1/8 hp from 4 in. dia package.
Motors

Right Angle Gearmotors offer 1/8 hp from 4 in. dia package.

Mated to 750 Series right angle gearing, 100 mm AC Right Angle Gearmotors offer 12-104 lb-in. continuous torque from compact package with 3-wire reversible hookup and various mechanical options. Series is powered by 115 V, 60 Hz single-phase TEFC permanent split capacitor motors and offered in 6 standard versions with gear ratios from 5.2:1-50:1 and fixed output speeds from 327-28 rpm. Continuous...

Read More »
Reversing Quarter-Turn Actuators are CE- and CSA-approved.
Actuators

Reversing Quarter-Turn Actuators are CE- and CSA-approved.

Offered in on/off and proportional control models, EPM Series is designed for use with up to 24 in. ball and butterfly valves and torque outputs from 300-13,500 lb-in. Electric actuators utilize modular PCBs and epicyclical gear design to minimize wiring and provide dependable torque transmission. Proportional control model adds features such as real-time thermal management with close-loop...

Read More »
Timing Belt Drive has sag-resistant, one-piece design.
Belt, Rope, and Chain Drives

Timing Belt Drive has sag-resistant, one-piece design.

Offering smooth linear motion in positioning and indexing applications, AZ1040 features one-piece aluminum profile extrusion which serves as belt housing. T-slots and receiver grooves for load carriage guide bars are incorporated into the profile design, and load carriage measures 7.4 x 6.3 in. Depending on payload weight, max travel speed is 16.4 fps. Repeatability is rated at ±0.008 in....

Read More »
Komatsu America Corp. Announces Tier 4 Diesel Engine Technology
Engines

Komatsu America Corp. Announces Tier 4 Diesel Engine Technology

Rolling Meadows, IL, April 6, 2010- Komatsu America Corp. is pleased to announce the introduction of its new diesel engine that features the next generation of engine technology designed to meet US EPA non-road Tier 4 interim emission regulations. Based on Komatsu proprietary technologies developed over many years, the new diesel engine reduces exhaust gas particulate matter (PM) by more than 90%...

Read More »
Plain Bearings (Bushings)

Steel-Backed Polymer Bearing suits demanding applications.

Constructed to RoHS standards, FR-164 lead (Pb)-free, steel-backed polymer bearing is designed for use in extreme oil pressure and high-speed conditions. It is offered as straight sleeve bearing, with standard IDs from 2-180 mm; inch sizes are also available. Anti-wear properties, degree of friction, and ability to resist cavitation meet needs of demanding applications in various industries.

Read More »
Planetary Drive offers maximum output torque of 1,000 nm.
Gearheads and Gearboxes

Planetary Drive offers maximum output torque of 1,000 nm.

High-efficiency E01 Torque-Hub® Electric Drive is offered in fully integrated, compact package that includes AC and DC electric motor options, as well as integrated static brake that is sized according to application requirements. Drive meets zero emissions requirements and is suited for mobile applications such as material handling, turf and lawn/garden machinery, and specialty purpose...

Read More »

All Topics