Integrated Servo Motors include absolute encoders.
Motors

Integrated Servo Motors include absolute encoders.

Integrated servo motor Models MAC400 and MAC800 are available with built-in absolute multi-turn encoders, offering multi-turn resolution of ±2,048 whole turns, and single-turn resolution of either 8,000 or 8,192, which is software-selectable. Motors will remember their positions while powered off, eliminating zero search operation on start up. Full absolute encoder position is available at...

Read More »
AC Electric Gearmotors offer 93 W single-phase power.
Motors

AC Electric Gearmotors offer 93 W single-phase power.

Compact parallel shaft gearmotors, with 100 mm dia, provide continuous torque in compact package with 3-wire hookup. Nine standard versions feature gear ratios from 5.0:1 to 215.6:1 and fixed output speeds from 340 to 8 rpm, respectively, and continuous output torques range from 16-350 lb-in. Providing 1/8 hp, units are powered by 115 V, 60 Hz single-phase TEFC permanent split capacitor motors.

Read More »
Pneumatic Bellow Actuators resist weather/acids/chemicals.
Actuators

Pneumatic Bellow Actuators resist weather/acids/chemicals.

Cylinders in BCS series are equipped with 1.4301 SS passivated plate, and are resistant to corrosion and acids as well as many detergents. Units have working diameters of 150-400 mm and, depending on series, strokes up to 273 mm are possible. Featuring diameters of 150-385 mm and operating temperatures of -20 to +130°C, BCE series include epichlorohydrin rubber that resists media, acids,...

Read More »
Air Flow Dampers

Gas Turbine Efficiency Experiences Improving Energy Aftermarket and Strengthening Demand For Core Products

Gas Turbine Efficiency plc (AIM: GTE), a leader in energy and aviation products and services, is reporting an increase in expected revenue for the first quarter of 2010, an improvement supported by several operating units. GTE revenue for Q1 2010 is expected to be in the range of $9.5-10.0M-up 20-25% over a strong Q1 2009 ($7.4M). This performance is supported by order increases in the company's...

Read More »
Gearmotors are built for extended life and performance.
Motors

Gearmotors are built for extended life and performance.

Combining WX gearhead and 3-wire-reversible 34R (4 in. dia), single-phase, 1/7 hp motor winding, WX gearmotors are designed to drive applications such as conveyor systems, packaging equipment, metering devices, and commercial appliances. Steel helical gears, designed to AGMA 9 standards or higher, ensure quiet operation, while synthetic lubricant allows these unvented gearmotors to operate over...

Read More »
NEMA 34 Steppers
Motors

NEMA 34 Steppers

Santa Clara, CA - Lin Engineering is pleased to announce that the 8718 NEMA 34 step motor series has been recognized with a certification of compliance to Underwriters Laboratories Inc.'s (UL) standards. The 8718 product line is a series of high torque, 2 phase stepper motors. The motors are available in three body lengths: 2.6 , 3.8", and 5.0" and are capable of up to 1,288 oz-in of holding...

Read More »
Spur Gears offer variety of standard and optional features.
Gears

Spur Gears offer variety of standard and optional features.

Available with 0.5-3.0 Mod range, precision spur gears are manufactured to Quality Grade 7e25 DIN 58405 as standard and are available in 817M40T steel, 805M20 case hardened steel to 58 HRC, as well as 303 and 316 stainless steel. Standard number of teeth starts at 18 and go up to 250, with different numbers of teeth available on request. Anti-backlash versions are also offered, and modifications...

Read More »
Turbines

Gas Turbine Efficiency Increased Orders for Compressor Water Wash System from the Power Gen Industry

Gas turbine operators continue to implement GTE's patented water wash system ORLANDO, Florida - Gas Turbine Efficiency plc (AIM: GTE), a leader in energy and aviation products and services, is pleased to report an increase in orders from the energy industry for its compressor water wash system, as more gas turbine operators implement this solution into their operations. Compressor water wash...

Read More »
Turbines

Gas Turbine Efficiency Announces New Agreement with Entegra Power Group Subsidiaries

ORLANDO, Florida - Gas Turbine Efficiency plc (AIM: GTE), a leader in energy and aviation products and services, has executed master services agreements with Tampa-based Entegra Power Group to provide gas and steam turbine major outage field services for their 4,400MW fleet consisting of 7FA combined cycle units. GTE's three-year agreement with Entegra includes providing Major Gas and Steam...

Read More »
Turbines

Gas Turbine Efficiency to Present Compressor Wash Technology at Russia Power in Moscow

GTE will present technical information and proven solutions to gas turbine operators in the international Energy Industry ORLANDO, Florida - Gas Turbine Efficiency plc (AIM: GTE), a leader in energy and aviation products and services, will be attending the upcoming Russia Power Event to present its Compressor Water Wash systems and exchange technical, operations and maintenance information with...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics