Submersible 48 VAC Pump Motor
Motors

Submersible 48 VAC Pump Motor

Bodine Electric's engineering team recently developed this new 48 volt AC submersible pump motor for an outdoor application. The motor is completely under water when it is operated. To address the customer's design challenges, Bodine Electric had to develop a unique 48VAC motor winding, and meet all mechanical and environmental requirements for a submersible motor design (IP-58). Bodine...

Read More »
IP54-Rated DC Gearmotor develops 214 lb-in. torque at 23 rpm.
Motors

IP54-Rated DC Gearmotor develops 214 lb-in. torque at 23 rpm.

Accepting any 12 Vdc source including battery power, Model MMP-TM57-12V GP52-195 is rated for 214 lb-in. continuous torque, at 23 rpm, and 443 lb-in. peak torque. Unit requires 7.2 A at 12 Vdc to generate full load torque, maximizing battery charge and allowing low-noise operation. With diameter of 2.24 in. and length of 7.75 in., reversible gearmotor has 12 mm dia, 25 mm long keyed output shaft,...

Read More »
Push-Rod Style Ballscrew Linear Actuator is IP65-rated.
Actuators

Push-Rod Style Ballscrew Linear Actuator is IP65-rated.

Thomson T60 precision ballscrew linear actuator features 75 x 60 mm housing and 38 mm dia hard chromed steel extension tube for selectable travel up to 1,500 mm, direct force to 1,000 N, speeds to 300 mm/sec, and acceleration to 8 m/secÂ-². Maximum input speed of product is 3,000 rpm. Unit is available with choice of 25 mm dia ballscrews with leads of 5, 10, 25, or 50 mm, offering 0.05 mm...

Read More »
Hooks

Campbell-Republic Crain & Hoist Features Crosby Group's, Alloy Master Links

Campbell-Republic Crain & Hoist Corp. has been a distributor of crane equipment, accessories, parts & supplies for over 50 years. We provide equipment, parts & supplies including hoists, trolleys, slings, wire rope custom assemblies, rigging equipment & accessories. We also provide lifting parts & supplies, wire rope terminations, grip clips, mooring sockets, hooks, shackles, sling fittings,...

Read More »
Motors

ARC Systems Offers High Performance Brushless DC Motors

ARC Systems, Inc. was founded in 1967 to provide the aerospace industry with a dependable source for high-precision motors and A.C. components. To meet the needs of this demanding market, ARC developed a unique team philosophy: to be a fully integrated, completely self-sufficient facility. ARC Systems now offers high performance brushless DC motors for servo drives in motion control applications....

Read More »
Motors

Precise Power Corporation Debuts World's First 100HP Single-Phase Motor

Bradenton, Fla. - Precise Power Corporation, PPC, announces the development of its new 100hp single-phase motor, the most powerful of its kind in the world. This is the company's latest enhancement to its cost effective Written-Pole® technology product line, previously topped at 75hp. In early 2004, PPC began development of this motor in response to requests from farmers, and light...

Read More »
Gearheads and Gearboxes

ATLANTA Drive Systems to Showcase Expanded Range of Standard Rack & Pinion Drive Systems at IMTS 2010

ATLANTA Drive Systems, Inc. will showcase their expanded range of standard Rack & Pinion Drive Systems in Booth N-6322 during IMTS 2010 at McCormick Place in Chicago, September 13 - 18, 2010. These rack & pinion drive systems are available in five levels of precision, including ultra-high precision zero backlash axis drives. They are perfect for a wide range of applications, including axis drives...

Read More »
Gearboxes suit speed-reducing, rotation control applications.
Gearheads and Gearboxes

Gearboxes suit speed-reducing, rotation control applications.

With virtually unlimited gear ratios from 10:1 to 7,000,000:1, Single Ovoid Gearbox Model 810210 and Double Ovoid Gearbox Model 810330 provide continuous torques of 0.5 Nm and 2.0 Nm, respectively. At 7,000,000:1 ratio, gearboxes achieve extremely low speed of 0.002 rotations/hr. Units interface with DC brush motors, AC synchronous motors, and stepper motors, making them suitable for cam timers,...

Read More »
Permanent Magnet DC Gearmotors and Motors feature brush-life sensor.
Motors

Permanent Magnet DC Gearmotors and Motors feature brush-life sensor.

Type 42A permanent magnet DC gearmotors and motors include electronic brush-wear sensors, integrated into motor housing, that indicate when either of brushes is nearing end of its useful life. Sensor system allows OEMs to electronically monitor brush wear to maintain uninterrupted operation of PMDC gearmotors or motors. When equipped with sensors, gearmotors and motors can accommodate built-in...

Read More »
Explosionproof Brushless DC Gearmotor meets UL requirements.
Motors

Explosionproof Brushless DC Gearmotor meets UL requirements.

Designed and tested to stringent specifications, type 22B-Z3 variable speed, 24 Vdc gearmotor meets UL Class 1, Division 1, Groups C and D Hazardous Location requirements for safe operation in explosive atmospheres. Motor winding is optimized to operate from solar-powered batteries, and gearbox is supplied with synthetic lubricant to handle outdoor temperature extremes.

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics