
New SK 02040.1 Helical Worm Gear Unit Delivers an Output Torque up to 100 Nm
Nord’s SK 02040.1 Helical Worm Gear Unit is suitable for conveyors in food and beverage, bottling, manufacturing, warehousing and packaging applications. Units offer a power range from 0.12 to 1.1 kW and speed ratios ranging from 5.3:1 to 330:1. SK 02040.1 unit comes in one-piece die-cast aluminium UNICASE™ housing that increases the strength and rigidity.
Read More »
Latest HPN Planetary Servo Gearheads Come in Quick Connect Single Bolt Clamping Design
HPN Planetary Servo Gearheads are available in frame sizes of 11, 14, 20, 32, and 40 with two-stage ratios of 15:1, 20:1, 25:1, 35:1, 40:1, 45:1 and 50:1. Units deliver peak torque ranging from 9 N∙m to 752 N∙m and a backlash of <5 arc-min (single stage) and <7 arc-min (Two stage). The gearheads can be coupled to any servo motors using Quick Connect® mounting system. Units are suitable for...
Read More »
New Xtrimium Dual-Worm Grinding Wheels Realize Reduced Harmonics
Xtrimium™ Dual-Worm Grinding Wheels are available with vitrified bond section and a fine-grit resin section. Units minimize production cost by eliminating wheel swapping and deliver surface finishes of 1.0 mm (Rz) and 0.05 mm (Rpk).
Read More »
New Linear Voice Coil Motor Delivers a Peak Force of 77.7 N
Moticont’s GVCM-051-089-05S06 Linear Voice Coil Motor is offered with high speed internal shaft and bearings in 50.8 mm dia. x 88.9 mm long housing with threaded mounting holes. Unit features high force to size ratio with continuous force of 24.6 N. The motor features a stroke of 69.9 mm and ground shaft with diameter of 5.99 mm. Unit is suitable for applications such as medical devices,...
Read More »
Checklist: How to Get the Right Belt the First Time
This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.
Read More »
New RN and RNN Cylindrical Roller Bearings Offer Heavy Load Capacity
RN and RNN Cylindrical Roller Bearings are designed with low noise and vibration, uniform contact stress and guide ring. Unit’s cage-less design makes it suitable for applications such as material handling, construcation equipment, wind energy, mining and heavy trucks.
Read More »
New 5-Phase PKP5 Stepper Motors Feature 1/4 in. Output Shaft
Oriental Motor’s 5-Phase PKP5 Stepper Motors are offered in 28 mm, 42 mm and 56.4 mm size mounting frame (NEMA 23). The motors are available with mini connector and encoder options for 42 mm, 56.4 mm and 60 mm frame size. Oriental’s CVD driver comes with advanced microstepping control, selectable step angle and microstepping filter control. The CVD drivers are offered with or without mounting...
Read More »
New 60 W Right-Angle Motor Comes with Hollow Shaft Right-Angle Hypoid JH Gearhead
Oriental’s 60 W Right-Angle Motor is equipped with a brushless BL5 motor. Unit is offered with IP66 connector that provides protection and allows connection between motor and driver with two orientation of cable outlet direction. JH gearhead delivers a maximum rated torque of 15.6 N-m via stainless steel metric output shaft and an output speed ranging from 80 to 3600 r/min.
Read More »
New Dedeco SUNBURST Radial Discs are Designed for Polishing Hard-to-Access Areas
Dedeco® SUNBURST® Radial Discs are suitable for finishing, smoothing and high-luster polishing on precise, semi-precious and non-precious metals, acrylics and ceramics. Units feature specially treated ceramic abrasive grain throughout the thin bristles. Dedeco discs enable detailed finishing and polishing in curved and irregular spaces by the adjustment of speed.
Read More »
Latest AlphaStep Stepper Motor Systems are Offered with Mechanical Absolute Sensor
AlphaStep Closed Loop Stepper Motor Systems are used in Hybrid control system that is designed for monitoring motor’s position. The motors are equipped with planetary and harmonic gearheads that are available with gear ratios of 7.2 and 10:1 and 50 and 100:1 respectively. Gearheads come with built-in controller or pulse input type driver that reduces the generation of heat. AZ series motors are...
Read More »
New Sola Light Engines Offer Output in ~735 nm Spectral Region
Lumencor’s SOLA SE UV-nIR and SOLA SE V-nIR light engines output centers on 365 nm and 395 nm respectively. Units produce output based on array of solid state light sources that turn on and off in unison producing white light. Exciting nuclear dyes such as DAPI, Hoechst, Cy7 and ICG, the light engines produce white light without heat, electronic and spectral noise.
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »