New Mechanical Power Transmission Products

Siemens Energy to Supply Power and Heat for the Winter Olympics in Sochi

Erlangen, Germany - Siemens is to contribute to the success of the 2014 Winter Olympics in the Russian city of Sochi by implementing several energy projects worth a total of more than EUR125 million. Siemens Energy has supplied gas and steam turbines to the local utility Sochinskaya TES, which will ensure power and heat supply for athletes and visitors at the 2014 Winter Olympics. Gas and steam...

Dortronics Reaffirms Strength of Product Line at ISC West 2010.

Commitment to Efficient and Reliable Door Control Solutions Highlighted by Introduction of New 2010 Product Brochure. Las Vegas, NV - Today at ISC West 2010, Dortronics Systems, Inc. is showcasing their extensive line of door control solutions for the alarm and security marketplace. Along with the introduction of their new 4700 Series Mantraps, Dortronics is highlighting specialty products that...

All Steel Metric Rod End Bearings from Aurora Bearing Co.

Aurora Bearing Company's CM-M and CW-M series metric male and female rod end bearings feature a 1 piece steel race way, machined integral to the steel body, cold formed around a chrome plated, alloy steel ball for strength, precision and structural integrity. Their superior design and materials specifically address a common failing in economy grade metric rod ends bearings built to DIN ISO...

Integrated Servo Motors include absolute encoders.

Integrated servo motor Models MAC400 and MAC800 are available with built-in absolute multi-turn encoders, offering multi-turn resolution of Ã-

Direct Acting High Speed Servo Valve (DASV)

Download this paper to learn about how high performance servo valve's can be used in your most demanding hydraulic and pneumatic applications.

AC Electric Gearmotors offer 93 W single-phase power.

Compact parallel shaft gearmotors, with 100 mm dia, provide continuous torque in compact package with 3-wire hookup. Nine standard versions feature gear ratios from 5.0:1 to 215.6:1 and fixed output speeds from 340 to 8 rpm, respectively, and continuous output torques range from 16-350 lb-in. Providing 1/8 hp, units are powered by 115 V, 60 Hz single-phase TEFC permanent split capacitor motors.

Pneumatic Bellow Actuators resist weather/acids/chemicals.

Cylinders in BCS series are equipped with 1.4301 SS passivated plate, and are resistant to corrosion and acids as well as many detergents. Units have working diameters of 150-400 mm and, depending on series, strokes up to 273 mm are possible. Featuring diameters of 150-385 mm and operating temperatures of -20 to +130Ã-

Gas Turbine Efficiency Experiences Improving Energy Aftermarket and Strengthening Demand For Core Products

Gas Turbine Efficiency plc (AIM: GTE), a leader in energy and aviation products and services, is reporting an increase in expected revenue for the first quarter of 2010, an improvement supported by several operating units. GTE revenue for Q1 2010 is expected to be in the range of $9.5-10.0M-up 20-25% over a strong Q1 2009 ($7.4M). This performance is supported by order increases in the company's...

Gearmotors are built for extended life and performance.

Combining WX gearhead and 3-wire-reversible 34R (4 in. dia), single-phase, 1/7 hp motor winding, WX gearmotors are designed to drive applications such as conveyor systems, packaging equipment, metering devices, and commercial appliances. Steel helical gears, designed to AGMA 9 standards or higher, ensure quiet operation, while synthetic lubricant allows these unvented gearmotors to operate over...

NEMA 34 Steppers

Santa Clara, CA - Lin Engineering is pleased to announce that the 8718 NEMA 34 step motor series has been recognized with a certification of compliance to Underwriters Laboratories Inc.'s (UL) standards. The 8718 product line is a series of high torque, 2 phase stepper motors. The motors are available in three body lengths: 2.6 , 3.8 , and 5.0 and are capable of up to 1,288 oz-in of holding...

Spur Gears offer variety of standard and optional features.

Available with 0.5-3.0 Mod range, precision spur gears are manufactured to Quality Grade 7e25 DIN 58405 as standard and are available in 817M40T steel, 805M20 case hardened steel to 58 HRC, as well as 303 and 316 stainless steel. Standard number of teeth starts at 18 and go up to 250, with different numbers of teeth available on request. Anti-backlash versions are also offered, and modifications...

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.