New Ecomag Linear Actuators Deliver Positioning Speeds up to 13 mm/s
Actuators

New Ecomag Linear Actuators Deliver Positioning Speeds up to 13 mm/s

SKF’s Ecomag Linear Actuators are available in push models ECO 2/4 and ECO 6/8 and push/pull models ECO 3/5 and ECO 7/9 models. Units offer push-load and pull-load force of up to 6000 N and 4000 N respectively. Having strokes up to 300 mm, actuators feature built-in limit switches. Ecomag actuators are fully tested UL standards and are suitable for use in hospitals, diagnostic centers, and...

Read More »
New Rotary Voice Coil Actuators Feature Moving Coil Design
Actuators

New Rotary Voice Coil Actuators Feature Moving Coil Design

H2W’s TWR-015-346-2RC High Torque Rotary Coil Actuators deliver a continuous torque 1.29 N-m and peak torque of 3.88 N-m at a duty cycle of 10%. Units generate a total angular displacement of 15° and motor constant of 0.24 N-m/sqrt(watt) per coil and a 0.34 N-m/sqrt(watt) when coupled together. Actuator’s moving coil design provides hysteresis free movement and ripple-free motion. Unit can...

Read More »
New NORDBLOC.1 Helical Gears are Designed for High Speed and Torque Applications
Gearheads and Gearboxes

New NORDBLOC.1 Helical Gears are Designed for High Speed and Torque Applications

NORDBLOC.1 Helical Gears are available in five sizes with motor powers ranging from 0.12 to 7.5 kW in flange or foot/flange mounted versions. Units come in FEM-optimised UNICASE corrosion resistant aluminum housing. NORDBLOC.1 gears are suitable for food or pharmaceutical industries. Unit’s bores and mounting faces are machined with precise tolerances to deliver accurate positioning of gear...

Read More »
New EPR and PER Gearboxes Feature Inline Planetary Gearboxes at an Right Angle
Gearheads and Gearboxes

New EPR and PER Gearboxes Feature Inline Planetary Gearboxes at an Right Angle

EPR and PER right angle bevel planetary gearboxes are available in ratios of 3:1 to 1000:1 in variable sizes and configuration. The gearboxes include a spiral bevel gear input to an inline planetary gear output. The EPR series features three different shaft outputs, a hollow shaft output and a flange output. The PER series has metric or NEMA shaft output and is used in motion control...

Read More »
New Pin Oven Chains are Suitable for High Temperature Applications
Chains

New Pin Oven Chains are Suitable for High Temperature Applications

Iwis’s Pin Oven Chains are available in flexible or snap-off pin versions with three fixture possibilities such as integrated into outer chain plates, secured with special nuts or fixed with split-pins. The pins feature protective head made of PEEK and are heatproof up to 260°C. Units are wear-resistant and are treated with PWIS-free IPP lubricant.

Read More »
Latest F135 Engine is Now Available with Growth Option 2.0
Engines

Latest F135 Engine is Now Available with Growth Option 2.0

Pratt & Whitney’s F135 Engine with Growth Option 2.0 upgrade increases power and thermal management system capacity. Unit consists of suite of compressors and turbine technologies with improvements in thrust. Increased PTMS capacity allows F-35 to use an enhanced spectrum of offensive and defensive weapon system technologies. Growth Option 2.0 uses Future Adaptive Spiral Technology approach...

Read More »
New Simotics XP Chemstar Motors are Suitable for Chemical and Petrochemical Industries
Motors

New Simotics XP Chemstar Motors are Suitable for Chemical and Petrochemical Industries

Siemens’ Simotics XP Chemstar Motors are available in 0.25 to 500 kW range and are suitable for applications such as pumps, compressors, fans, extruders, agitators and separators. Units come in grey cast iron enclosure and bearing plate and a steel fan cover. The motors are offered with freely selectable options such as reduced start-up current, motor monitoring, reinforced bearings or tropical...

Read More »
New Electric Failsafe Actuators are Offered with Internal Battery Backup
Actuators

New Electric Failsafe Actuators are Offered with Internal Battery Backup

HRS Series Electric Failsafe Actuators are available in HRS2, HRSN3 and HRSN4 models with up to 440 in-lbs, 1770 in-lbs and 8850 in-lbs torque. Units are offered as stand-alone 24VAC/VDC units or proportional modes and come with internal battery backup and supercapacitor reserve power supplies. The actuators are equipped with 2x volt-free Form A Auxiliary switches and ISO5211 compliant mounting...

Read More »

All Topics