New Mechanical Power Transmission Products

Cartridge Bearings have noise-reducing design.

Models B2000 and B2001, with tapered-hex shafts, eliminate need for through axles. Precision ABEC-1 bearings are insert-molded into conductive polypropylene housing and finished bearing units are crimped into roller tubes. Each end of roller is independently spring-loaded. Model B2001 contains one ABEC-1 bearing with roller capacity of 100 lb. Model B2000 houses 2 ABEC-1 bearings with roller...

Induction Motors are designed to operate in harsh conditions.

IndraDyn A induction motor, with 1 to 100 kW power range, offers IP65 protection, including IP65 cooling fan. Air-cooled and water-cooled motors are available in shaft heights of 100, 130, 160, and 180 mm, and can be fitted with optional high-resolution, single-turn or multi-turn absolute encoders and holding brake.

Stepper Motors perform at 16 resolution modes.

INS20-PF Stepper Motor series works with company's INS 2-Phase NanoDrive(TM) and offers up to 200,000 steps-per-revolution for smoothness and resolution. Features include 187 Oz-in holding torque in Nema sizes 17 and 23 and all-metal bearing construction in 2-phase stepper motor package. Steppers feature current rating of 2 A, voltage of 2.78-5.46 V, and basic step angle of 1.8Ã-

Servo-drive supports analog and parallel interfaces.

Modular IndraDrive servo-drive system covers output spectrum from 1.5 to 120 kW, and unites functions of DIAX and Servodyn drives in joint platform. Servo-drive comes with integrated safety functions and conforms to IEC 61131-3. Unit conforms with EN-954-1, Category 3, and complies with Europe-wide safety regulations. IndraDrive supports standard control communication systems such as SERCOS...

Bearing Solutions For Recreational Applications

This white paper provides and overview of bearing solutions for recreational applications.

Shaft is lighter than conventional shafts.

Available in steel, aluminum, or carbon fiber, lightweight Expanding Through Shaft incorporates coiled hoses and fittings for single point inflation. Product serves packaging and converting industries.

Power Heads are made of die-cast aluminum.

Basic power heads are available in 12 and 24 Vdc versions, as well as 110 and 220 Vac versions, with gear ratios of 17:1, 25:1, 34:1, 55:1, and 110:1. Products provide output torques up to 350 inch-pounds and may be modified for custom applications.

Bearing Material is self-lubricating and abrasion-resistant.

Vesconite comes as solid, cored, or flat form and offers low coefficient of friction, high dynamic loading, and ease of machining. It is suitable for applications in marine, earthmoving, pumping, and mechanical handling industries, or any application where lubrication is difficult or not possible to be performed satisfactorily. Fully machined or molded parts are available.

Hydraulic Coupling System suits CNC centers.

Hydro-Coupler(TM) provides through-door, continuous, hydraulic connection to hydraulic workholding fixtures on carrousel type pallet changers. Unit applies pressure from 1,000-5,000 psi from top of pallet to ensure that full clamping force is never lost. System automatically monitors clamping pressures, hydraulics level, and temperature and responds to irregularities. Continuously connected...

Linear Actuators suit medical applications.

Smart M-Digit brushless motor linear actuators feature integral programmable controller with full 32-bit PID motion control system. Stroke lengths include 2, 4, and 8 in. Depending on lead screw selected, actuators can achieve acceleration in excess of 23 m/secÃ-², speed of 1 m/sec, and provide up to 200 lb of force, with repeatability to 1.5 microns. Operating temperature is -40 to 150Ã-

Torque Motor produces low degree of torque ripple.

IndraDyn T series direct electric drive torque motors have torque ratings up to 4,500 Nm and speeds from 100 to 1,200 rpm. Synchronous frameless motors consist of stator with 3-phase winding and rotor with permanent magnets. Motors are for link circuit voltages of up to 750 V and have liquid cooling, including thermal encapsulation. Integrated temperature sensors protect motor windings against...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.