Tension Brakes feature finned rotor design.

Tension Brakes feature finned rotor design.

Series SA and TA are Straight and Tapered-Bore Brakes that provide thermal dissipation and tension control for unwind brake applications. Air pressure is supplied to increase or decrease brake torque during unwind process of paper, film, foil, or fabric. High temperature O-rings and bearings allow units to run at max thermal capacity. Self-contained SA brakes are fully-assembled and mounted onto...

Read More »
Rotary Actuators provide rotation flexibility.

Rotary Actuators provide rotation flexibility.

Available in non-magnetic and magnetic models, double-acting, rack and pinion actuators feature male and female pinion variants, both with adjustable cushioning. Products feature operating pressures from 21-145 psi and are suited for compressed air environments. Offered in 90Â-

Read More »
Positioning Units deliver automation to laser experiments.

Positioning Units deliver automation to laser experiments.

Minature NewStep(TM) NSA12 Actuator enables motorized control of translation stages and mechanically adjustable mounts. Measuring 60 x 30 mm, unit provides up to 11 mm travel with sub-micron incremental motion. NewStep(TM) NSC100 Controller offers both manual and computer control via RS232. Multi-functional manual knob controls motor speed, and initiates home searches and computer control....

Read More »
Brushless DC Motor produces high power in limited space.

Brushless DC Motor produces high power in limited space.

With operating voltage of 28 V, Model 000-0362 is capable of delivering in excess of 45 oz-in. of continuous torque. It features 1.85 in. profile and 4.2 in. diameter. Motor utilizes Hall-Effect sensors and achieves 85% efficiency at load point. Custom mounting configurations and variety of electrical options are available to meet specific requirements.

Read More »
Step Motors suit marine and submarine applications.

Step Motors suit marine and submarine applications.

Submersible Series Stainless Steel Step Motors are internally sealed, eliminating corrosion and motor failure in fluid processing, washdown, and submersion environments. Standard washdown motors are partially filled with oil to prevent liquid ingress, while motors intended for complete submersion are filled with oil and are pressure-compensated. Submersible motors come in 23, 34, and 42 frame...

Read More »
Parallel Shaft Gearmotor incorporates 14 gear ratios.

Parallel Shaft Gearmotor incorporates 14 gear ratios.

Model PS1900 offers gearing ratios from 5-to-1 up to 320-to-1. Motor features continuous-duty torque ratings up to 125 lb-in. and compatibility with all Groschopp AC, PM, and DC brushless motors. Synthetic lubricants provide better heat dissipation and enable motor to withstand repeated starts and stops as well as continuous torque. Internal ball bearings and needle bearings on output shaft...

Read More »
Motors come in stainless steel and washdown versions.

Motors come in stainless steel and washdown versions.

Washdown Super-EÂ-® Motors are available in TENV and TEFC enclosures from 1-20 hp in NEMA frames 56C through 256TC. They are suited for food processing and other applications that expose motors to high-pressure washdown. All Stainless Super-Es come in TENV and TEFC enclosures and range from 1-7Â-½ hp in NEMA frames 56C through 213TC. With external surfaces made of 300 series SS, they are...

Read More »
Thrust Bearings add low-friction face to collars.

Thrust Bearings add low-friction face to collars.

Bearings, featuring nylon ball retainers, are made of steel or stainless steel to provide shaft collars with low-friction face for rotary applications. Suited for high-load, low-speed applications, bearings are used to locate idler pulleys, gears, lever arms, and other rotating components. Bearings enable axial positioning of components and come in 18 bore sizes from 1/8 to 1Â-½ in. ID. PTFE...

Read More »
Gear Head provides over 30,000 hours of life.

Gear Head provides over 30,000 hours of life.

EverTRUE continuous-duty, planetary gear head is available in 100, 140, and 180 mm sizes with ratios from 4:1 to 100:1. Lubricated for life, unit requires no maintenance or downtime. It runs at lower operating temperature compared to industry standard and has 4 arc-min of backlash. EverTRUE gear head is RediMount(TM) compliant, which provides error-free, 3-step mounting system.

Read More »
Synchronous Motors offer speeds to 30,000 rpm.

Synchronous Motors offer speeds to 30,000 rpm.

Designed for operation with bus voltages to 750 V, IndraDyn H kit motors are optimized for high torque and consist of 3-phase-wound stator and permanent-magnet rotor. They combine advantages of synchronous motor technology with operational characteristics of asynchronous motors, providing up to 6,500 Nm torque. Cooling system is enclosed within stator, and motor windings are protected against...

Read More »

All Topics