External Linear Actuator delivers thrusts up to 50 lb.

External Linear Actuator delivers thrusts up to 50 lb.

Size 14 Hybrid Actuator replaces motor, coupling, lead screw, and nut. Rotating, stainless steel, acme lead screw is integral part of motor with mating nut translating along screw. As motor steps, lead screw rotates but does not advance. Lead screw end can be machined to allow use of out-board bearing support for long lead screw lengths. Resolutions range from 0.00012-0.00192 in. per step.

Read More »
Brush DC Motors/Gearmotors have skewed armature design.

Brush DC Motors/Gearmotors have skewed armature design.

Series 14000(TM) brush-commutated DC motors and gearmotors feature 11-slot skewed armatures that minimize magnetic cogging. With modular construction, motors are available in 7 lengths and achieve peak torques to 410 oz-in. and speeds to 4,230 rpm. Series GM14000 gearmotors, available in 7 lengths with 4 ratios from 5.9:1-218.4:1, provide peak torques to 175 or 500 oz-in. Commutators are diamond...

Read More »
Signal Conditioners and Electronics support TEDS Sensors.

Signal Conditioners and Electronics support TEDS Sensors.

Rack mountable TEDS (Transducer Electronic Data Sheet) multi-channel and dual-mode signal conditioners are available for use with ICPÂ-® and charge output vibration, pressure, and force sensors. In-Line Charge Converters are available with TEDS capabilities, which enable the devices to store and recall TEDS data for attached sensor. In-Line TEDS Adaptor features interface chip that allows...

Read More »
Power Units offer plug-and-play functionality.

Power Units offer plug-and-play functionality.

NEF Power Units provide ready-to-use packages with base engine, cooling package, and air filter specified for stationary or mobile applications. Optional components include puller or pusher fans, balancers, air and fuel heaters, and engine mounts. Naturally aspirated, turbocharged, and charge-air cooled versions are rated from 80-227 hp and fitted with mechanical and electronic fuel injection...

Read More »
Rail/Disc Brake is rated for holding duty applications.

Rail/Disc Brake is rated for holding duty applications.

Suited for spring-applied, electromagnetically released brake applications, Hilliard/Twiflex MK Rail/Disc Brake is designed for holding duty and emergency stopping. Direct acting product has one moving part and incorporates electromagnetic coil that uses voltage dropping circuit. Offered in 3 versions, MK750, MK1400, and MK4800, brake is equipped with manual release mechanism and microswitch for...

Read More »
Precision Case Shafting suits linear motion applications.

Precision Case Shafting suits linear motion applications.

Suited for power transmission applications, EZEE Precision Case Shafting is produced with electromagnetic-based hardening system. Offered in lengths up to 15 ft, product comes in 100 variations and diameters from Â-¼-3 in., including 8 metric sizes. Options include pre-drilled shafts; metric dimensioned shafts; and chrome plating. Custom machined shafts include flats; keyways; drilled/tapped...

Read More »
Variable Torque Drive is rated at 350 hp.

Variable Torque Drive is rated at 350 hp.

MICROMASTER 430 inverter offers integrated control and includes local/remote control on BOP2 keypad. Product employs pump staging controller that takes auxiliary logic control out of external devices and brings them into drive. Controller activates up to 3 additional pumps to maintain proper system pressure. Provided with commissioning macro and I/O, product is suited for sophisticated control...

Read More »
Abrasive Wheels allow high-speed operation in die grinders.

Abrasive Wheels allow high-speed operation in die grinders.

T1 Abrasive Wheels feature non-woven cotton fabric with aluminum oxide abrasives that are laminated, pressed, and bonded together with fiberglass reinforcement. They feature 4 grit sizes and are available in 2, 2Â-½, and 3 in. dia., 1/16, 1/8, and Â-¼ in. thickness, and 1/4 or 3/8 in. bore. Wheels are rated for 28,000, 24,000, and 20,000 rpm. Options include soft bond for light deburring...

Read More »
Hydraulic Power Unit offers noise levels as low as 58-63 dB.

Hydraulic Power Unit offers noise levels as low as 58-63 dB.

Series 3520 offers flow rates from 13-249 lpm to suit single and multi-station test configurations. Noise reduction offered by optional acoustic attenuation system allows HPU to be positioned close to testing machine. With nominal operating pressures from 207-280 bar, series can operate at levels 10% above nominal full pressure to compensate for pressure loss between HPU and test stations. Fitted...

Read More »
Steerable Axles offer 9,000 lb capacity.

Steerable Axles offer 9,000 lb capacity.

Suited for trucks and trailers, COMPOSILITE ST(TM) 9K axles are used with 19.5 in. tires. They include 2.5 in. drop axle and aluminum cross member. In-line air spring design provides packaging space, measuring 23.5 in. from front edge of hanger to centerline of axle. Stabilizer uses cover to protect stabilizer rod from dirt and debris throughout travel. Zero torsion bushings eliminate bushing...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics