Powertrain Components

International Truck Introduces Enhancements to International ProStar ES

New Powertrain Improvements, Lightweight Specs Added to Industry's Best Fuel Efficiency Package LOUISVILLE, Ky.,Â-  -- At the Mid-America Trucking Show this week, International(®) Truck announced new enhancements to its industry-leading fuel efficiency package --the International(®) ProStar(®) ES. First introduced in December 2014, the ProStar ES, short for efficiency...

Read More »
AC Speed Control Motors generate up to 350 lb-in.
Motor Controllers and Drives

AC Speed Control Motors generate up to 350 lb-in.

Combining motor and controller in single closed-loop package,Â- DSC Series requires only single-phase 110/115 Vac or single-phase 220/230 Vac with output power of 6 W (1/125 hp) up to 90 W (1/8 hp). Electromagnetic brake with Deceleration Control Function is available to support vertical speed control applications. Motors come standard with parallel gear head, while programmable controllers...

Read More »
Double-Stack Linear Actuators deliver thrust up to 7.7 kg.
Actuators

Double-Stack Linear Actuators deliver thrust up to 7.7 kg.

Occupying just 0.8 in.Â-², Series 21000 Size 8 Actuators comes in captive, non-captive, and external linear versions with resolutions from 0.0025–0.04 mm per step. Units can also be micro-stepped for even finer resolution. Incorporating engineered thermoplastics in rotor drive nut and stainless steel acme leadscrew, stepper motor linear actuators are suited for medical equipment,...

Read More »
Industrial Hydraulic Motors have power density-optimized design.
Motors

Industrial Hydraulic Motors have power density-optimized design.

HÃ-¤gglunds CA 10–40 motors can simultaneously deliver full torque and full speed, both of which can be sustained indefinitely. Available downward to 10 Nm/bar, motors suit injection molding machines in plastics industry. There are 4 basic models and various displacements; 14 configurations in small torque steps allow tight dimensioning as well as full optimization in relation to...

Read More »
Automatic Transmission is designed for pressure pumping.
Transmissions

Automatic Transmission is designed for pressure pumping.

Carrying 3,200 hp (2,386 kW) rating, 9832 Oil Field Series™ (OFS) model delivers continuous torque and maximum horsepower for pressure pumping in difficult environments. Design and power enable extraction of shale oil and gas deposits at deeper levels, while size and weight address transportation limitations imposed by poor road conditions and mountainous terrain.

Read More »
Standard 3-Phase AC Motors offer max efficiency of 73%. .
Motors

Standard 3-Phase AC Motors offer max efficiency of 73%. .

Available in cable or terminal box type, KIIS Series provides 60 W, 1/12 hp or 100 W, 1/8 hp output power. Units can maintain wide speed range of 3–120 H (90~3,600 rpm) when used with inverter. Standard GVH parallel shaft gear headÂ- offers up to 350 lb-in. of permissible torque, while Hypoid right angle hollow shaft gear head, available exclusively on 100 W model, and is capable...

Read More »
Transmissions

Technology Award for Dual Clutch for Trucks

The I-Shift Dual Clutch transmission uses technology from the sports car industry to lift the driveability in heavy trucks to a whole new level. It is the first dual-clutch transmission for serial produced heavy vehicles, and the engineers responsible for the solution will receive Volvo's technology award for 2014. Dual clutch technology means that two gears can be engaged simultaneously and...

Read More »
Miniature Gear Drive is rated for 1/8 hp at 1,800 rpm.
Gearheads and Gearboxes

Miniature Gear Drive is rated for 1/8 hp at 1,800 rpm.

Measuring 1.25 in.Â-³, Miniature RA-300 Gear Drive has 0.250 in. diameter single input shaft, and single or double output shaft mounted in radial ball bearings. Unit is constructed with machined aluminum housing and steel case hardened helical gears in 1:1 and 2:1 ratios. Weighing just 6.1 oz, RA-300 provides output torque of 4.4 lb-in. (1:1 ratio) and 8.8 lb-in. (2:1 ratio).

Read More »
HPLC Injector targets OEM systems.
Actuators

HPLC Injector targets OEM systems.

Designed specifically to be built into OEM system, Cheminert C52 Series is available in 4, 6, 8, and 10-port configurations. Integrated 24 V motor/valve assembly comes in stainless steel or PEEK and only requires connection to instrument's power supply. Control is simplified to require single contact closure; injector’s position is determined by whether closure is held high or low. Optional...

Read More »
Short Run / Prototype Sintered Bronze Bushing Solutions from National Bronze Mfg. Co.
Plain Bearings (Bushings)

Short Run / Prototype Sintered Bronze Bushing Solutions from National Bronze Mfg. Co.

Roseville, MI — National Bronze Mfg. Co., a leading manufacturer of bronze bushings, bearings, and machined components, is please to introduce a solution for customers in need of powdered metal or sintered" bearings in short run or prototype quantities. The 100+ year old manufacturer describes both the problem many customers face as well as their customized solutions in the following expert...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers