Receive industry and products news from the market categories that matter to you most.
Stay up to date on industry news and trends, product announcements and the latest innovations.
Mechanical Power Transmission
- Brakes & Brake Accessories
- Drive Chains
- Hydraulic Power Units
- Mechanical Actuators
- Mechanical Amplifiers
- Mechanical Couplings
- Mechanical Feedthroughs
- Motors & Motor Accessories
- Other Mechanical Power Transmission Equipment
- Pulleys & Sheaves
- Speed Reducers
Lifetime Lubrication Ensures Smooth Operating Zero-Max Right Angle Gear Drives - They Feature Class 10 Spiral Bevel GearsMay 01, 2017
Plymouth, Minnesota: Lifetime lubrication in Zero-Max “Crown” gear drives assures motion system designers of a smooth operating, quiet right angle gear drive that needs no maintenance. These drives are designed for economical transfer of speed or power.
Lubricated for life with Beacon 325 premium grade grease, Zero-Max Crown drives feature heat treated AGMA Class 10 spiral bevel... Read More
Suitable for inspection, metrology, calibration, and scanning applications, A-62x PIglide RM Rotary Air Bearing Stages are equipped with slotless torque motors and optical encoders. Delivering velocity of up to 2500 rpm with up to ±50nm motion errors and axial runout to ±50nm, units provide point-to-point indexing or constant velocity scanning. Offering tilt error of 0.3arc-sec, positioners... Read More
Weighing 59 lb, 13X Single-Drive Axle is used in applications such as pick-up and delivery, beverage, utility, school bus, construction and ambulance. Axles are available in variety of ratios from 3.90 to 6.50 and between 17,000 and 21,000 lb gross axle weight ratings.Read More
Available in models ranging from 150HP to 600 HP, TITAN® TEFC Horizontal A.C. Motors are used in petrochemical, pulp and paper, wastewater, electric power, steel, forestry and cement industries. Designed for operating in 40°C and maximum altitude of 3,300 ft above sea level, units come with conduit box, bearing caps and end shields. Motors are rated to Class B and Class F rise at 1.0 and 1.5... Read More
The VCS20-020-CR-01-MC-F3K voice coil positioning stage has dual feedback capability. It can operate either under closed loop position control with force monitoring or closed loop force control with position monitoring. It uses H2W voice coil motor NCC20-18-020-1A to generate a continuous/peak force of 2.0 lbs [8.9 N]/6.0 lbs [26.7 N] with a total stroke length of 2.0 in [50.8 mm]. The... Read More
Suitable in biomedical dispensing and QC measurement, LCA6 Moving Coil Actuators offer encoder resolution of 5 µm. Delivering peak force of 3.5 N at 1.2 amps, units feature flat coils centered between cross rollers for reducing deflection load. Having 0.037 kg and 0.21 kg of moving mass and total mass respectively, actuators are designed in 60 x 135 x 6 mm dimensions. Actuators come with... Read More
Bridgeport’s Zinc Alloy Fittings Listed for Use with Aluminum EMT Means Contractors Can Install an EMT System that Won’t RustApr 21, 2017
STRATFORD, Conn. (April 19, 2017) – Electricians have often asked, “Why doesn’t an EMT manufacturer make corrosion-resistant tubing that won’t rust.” Now with aluminum EMT, contractors have their wish and can put away their rigid conduit threaders and reamers.
Aluminum EMT is the perfect material choice for indoor or outdoor, damp, wet or exposed environments. With... Read More
Available in models ranging from 1.5 to 18 GHz frequency with -180 dBc/Hz offset residual phase noise at 10 KHz, Low Phase Noise Amplifiers are suitable for electronic warfare, VSAT and radar applications. Offering 9 to 14 dB of small signal gain with 5.5 dB noise figure, units are housed in gold-over-nickel-plated Kovar™ metal drop-in packages. Having Psat levels from +16 to +25 dBm range,... Read More
Don't miss the latest news!
Receive industry and products news from the market categories that matter to you most.
Featuring non-rotating tip and non-contact limit switches, L-239 Linear Actuator has 52 mm positioning range, 300 N of pushing force and 50mm/sec maximum velocity. Used in automation applications, unit’s non-rotating tip prevents wobble, torque and wear at the point of contact. 10-9 hPa versions are also available for vacuum applications.Read More
Available in four sizes, IMA Actuator Series are suitable for slicing control, pressing, valve control and volumetric filling applications. Featuring stroke lengths from 76.2 to 457.2 mm and peak thrusts from 890 to 30,594 N at 610 mm/s speed, units are designed with screwed stator windings for minimizing cogging of the motor. Integrating servomotor and roller screw, units are made of... Read More
Suitable for machine tool, packaging and wash-down applications, FHA-C-H Series Actuators come with hollow-output shaft and low-profile form factor. Maintaining zero backlash, units are available in four sizes with gear ratios of 50:1, 100:1, and 160:1. Featuring EnDat® and HIPERFACE® encoder protocols and DESINA style flex rated cables, units meet IP65 standards and are rated to 480VAC.Read More
Wichita Falls, TX November 13, 2015 – WPT Power Corporation has expanded it’s power take-off line with the introduction of the Pilotless Mechanical PTO. The product launch was revealed at the 2015 Tree Care Industry Expo in Pittsburgh, PA in November.
Tier 4 standards have made fitment of pilot bearings increasingly difficult. This new mechanical PTO design eliminates the pilot... Read More
Available in 2kN and 4kN versions with stroke lengths between 100 and 500 mm, WhisperTrak™ Linear Actuators are operated on 12- or 24-volt input supply. 4 kN version is rated for 900 lb with load speed of 4 mm/s, whereas 2 kN version for 450 lb with 8 mm/s load speed. Having 10,000 cycles of average life at maximum load capacity, units are suitable for medical, personal mobility, material... Read More
Housed in 100 x 100 mm footprint with 30 mm center aperture and 45 mm low profile, RTLA-30-100-SMART Series Rotary Actuators are suitable for optics, measurement and alignment applications. Combining SMART motor and precision worm-gear drive mechanism, units are available with 180:1, 90:1, 45:1 worm gear ratios and deliver 30 rpm rotation speed and 1.8 arc-sec translated resolution. Actuators... Read More
Available in HMC7885 and HMC7748 models, Gallium Nitride Power Amplifiers are suitable for test and measurement, communications, military/aerospace surveillance and radar applications. Housed in hermetic flange-mount package, HMC7885 provides 21 dB of small-signal gain and 45 dBm of saturated RF-output power and draws 2.2 A from 28-V dc supply. Offering 60dB of small-signal gain, HMC7748 draws... Read More
HUNTSVILLE, ALABAMA – Schwarze Industries is pleased to announce the introduction of a free 5-year/5000-hour extended warranty program on its A7 Tornado, A8 Twister, and the A9 Monsoon sweeper engines.
This program, available through Schwarze's extensive sweeper dealership, provides coverage of all sweeper engine components and applies to new John Deere Tier 4 propulsion engines... Read More
- Key automotive uses include water pumps, superchargers, fan brackets, and power steering pumps -
Plymouth, MI… C&U Americas, LLC, the North American subsidiary of the C&U Group, one of the world’s top 10 bearing manufacturers and China’s largest bearing producer, offers world-class quality water pump bearings for use in automotive and heavy duty water pumps. The bearings are... Read More
- Designed for A/C clutches in automotive and over-the-road truck applications
- Plymouth, MI… C&U Americas, LLC, the North American subsidiary of the C&U Group, one of the world’s top 10 bearing manufacturers and China’s largest bearing producer, offers world-class quality magnetic clutch bearings for use in air conditioning clutches for automotive and over-the-road truck... Read More
C&U Americas Versatile Single Row Deep Groove Ball Bearings Yield High Speed Capabilities and Low Torque Under Radial and Axial LoadsApr 08, 2017
- Extensive automotive applications in engine accessory, drivetrain, and chassis -
Plymouth, MI… C&U Americas, LLC, the North American subsidiary of the C&U Group, one of the world’s top 10 bearing manufacturers and China’s largest bearing producer, offers versatile, world-class quality single row deep groove ball bearings for use in an extensive range of automotive applications.... Read More
- Versatile performance under heavy loads, many applications, relatively small package-
Plymouth, MI… C&U Americas, LLC, the North American subsidiary of the C&U Group, one of the world’s top 10 bearing manufacturers and China’s largest bearing producer, offers versatile, world-class quality tapered roller bearings for use in an extensive range of challenging applications. The... Read More