New Mechanical Inverters Products Page 1

Micro-Inverters for Lighting are qualified for loads up to 35 W.

By providing selectable 120 or 277 Vac emergency power to connected load up to 35 W, IIS-35-I allows operation of LED, fluorescent, or incandescent fixtures with full light output in emergency mode. LED loads are qualified for up to 35 W (NEMA 410), and product also carries UL listings for USA and Canada. Along with replaceable integral battery, features include up to 250 ft remote mounting...

CCFL Controller IC increases LCD backlighting control.

Supplied in 28-lead, plastic SOIC, LX6502(TM) brings PureBLACK(TM) mega-contrast dimming to 24 V CCFL inverter applications in small- to large-sized LCDs. IC offers mega-contrast dimming and fully integrated on-chip 12 V gate drivers to support full-bridge, high- and low-side N-channel power MOSFET configurations with input voltages to 35 V. In addition to protection functions, product integrates...

Bundle Inverter automates 4-panel printing.

Inserted between 2 Iconotech Case Printers, Bundle Inverter 3636 facilitates 4-panel printing by collecting cases from first printer, inverting, and inserting them into second printer without adding labor. Once in inverter, cases are squared, gripped by cut edges, and rotated 165-

DC/AC Inverters suit CCFL-backlit LCD applications.

Available in single, dual, and multi-lamp configurations, Smart Force(TM) SFW Series inverters can be used in 5.7-19 in. LCDs used for industrial/medical and general applications. They feature 6 mm profile, onboard lamp current regulation, strike voltages to 2,400 Vrms, and operating temperature range of -20 to 85-ºC. RoHS compliant units also offer onboard dimming, open lamp detection, and are...

Screen Printing vs. Digital Printing: Five Key Decision Factors

Learn about the key factors for deciding between screen printing and digital printing.

DC-AC Inverter suits 10-17 in. industrial-grade LCD panels.

Designed for driving cold-cathode fluorescent lamps in LCD back-lighting applications, RoHS-compliant LS6D-1012A-RH provides input of 12 Vdc and output current of 3.3-6 mArms/lamp. Measuring only 7.09 x 1.46 x 0.39 in, device has power output of 5 W/lamp, or 10 W total. Other features included are 1,500 Vrms minimum start-up voltage, 2 A maximum input current and operating and storage temperature...

Smart Force(TM) EL Inverters from ERG Offer Plug-and-Play Power Solutions for Backlighting and Illumination Applications

Endicott, NY, November 2008 - The family of Smart Force(TM) DC-AC EL inverters from Endicott Research Group (ERG) Inc. provides a wide range of standard and custom solutions for display and device designers who need to power electroluminescent (EL) backlit LCDs or devices where EL is used for accent and decorative lighting. EL is still a very viable technology for backlighting flat panel displays...

Development Kit facilitates small fluorescent UV design.

Suited for research and design engineers working with experimental ultraviolet applications, GB-UV1 Kit provides assortment of 69 UV lamps ranging from high-intensity UVC to UVA backlight. Packaged in wood chest with brass fittings and lock, kit also contains 19 inverters, as well as cabling and other accessories. Components vary in wavelength, voltage input, and size for use in medical,...

Inverters suit electroluminescent backlit LCDs or devices.

Vacuum encapsulated Smart Force Series DC-AC inverters prolong lamp life by automatically adjusting operating voltage and frequency. Suited for battery-operated devices, LPS series consumes less than 400 mW per unit load, while JLA Series powers imported EL lamps used to backlight LCD modules. Inverters are available in Standard E600, E300, EMini-EL for small displays in portable, hand-held...

DC/AC Inverters suit automotive and industrial LCD panels.

Capable of powering 1- or 2-lamp LCDs with either U or L shaped lamps, 10m Class Inverters operate over temperature range of -30 to +85-

Low-Profile Inverter powers large CCFL-backlit LCDs.

Series DmF6 DC-AC Inverters measure 9 mm high and power CCFL-backlit LCDs in 19-24 in. diagonal size range. Inverters power 6 CCF lamps with combined power up to 60 W, providing starting voltage up to 2,400 V with flicker-free brightness control from 0-100%. Inverter also features transformers and connectors for direct connection to display on board measuring 9.52 x 2.83 in. Six mounting holes...

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.