Mechanical Components and Assemblies

Wipes feature controlled dispensing box.
Towels

Wipes feature controlled dispensing box.

WYPALL® X80 wipers are made using HYDROKNIT® Fast Absorbing Material, which is manufactured using jets of water to bond soft, absorbent paper to non-woven fabric. Towels are tear-resistant and contain no holes, strings, metal chips, or residues. Denim-like steel blue color helps to hide dirt and stains. There are 160 WYPALL® X80 Shop Towels measuing 12.5 x 16.8 in. packaged in...

Read More »
Bearings improve machine tool performance.
Bearings

Bearings improve machine tool performance.

Fafnir® THSS True High-Speed Sealed bearings are angular contact ball bearings designed for high spindle speeds. Non-contact dynamic seals keep contamination out while minimizing running torque, and effectively retaining grease inside bearing. Fafnir WearEver(TM) bearings resist contamination-induced surface damage. They feature CERBEC® ceramic ball and steel that resists wear debris...

Read More »
Nutrunners contain internal microprocessor.
Nut Runners

Nutrunners contain internal microprocessor.

Made of alloy steel, Series 66 offset in-line nutrunners fit tight assembly applications requiring torque of 20, 30, 35, 45, 75, 100 or 150 Nm. Speed is rated at 2290, 1485, 1177, 937, 424, 345, and 208 rpm. Units include low mass motor, programmable pushbutton, and forward/reverse button. Intelligent Tool Interface (ITI) module inside tool handle makes setup and calibration automatic upon...

Read More »
Amplifier/Function Generators handle high voltages.
Signal Generators

Amplifier/Function Generators handle high voltages.

Models 609E-6-FG and 10/10B-FG will operate as dc stable high voltage amplifiers or function generators. They provide sources for externally amplified signals, adjustable high-level dc voltages, and adjustable high-voltage sine, square, or triangle waveforms. Both work over range of 0.2 Hz to 10 kHz. As amplifiers, 609E-6-FG is rated for 0 to ±4 kV and 10/10B-FG is rated for 0 to ±10...

Read More »
Motor and Spindle operates at 20,000 to 80,000 rpm.
Motors

Motor and Spindle operates at 20,000 to 80,000 rpm.

Astro-E 800 is available with choice of two spindles: NR-3080 and NRA-5080. NR-3080 features ceramic bearing suitable for standard machining, while NRA-5080 lubrication-free spindle is designed with air bearing for light-duty machining. Through use of brushless DC motor, Astro-E 800 (30 mm OD) achieves power levels of up to 250 W. Its air cooling system prevents heat generation of motor and...

Read More »
Self-Clinching Plungers position and stop drawers.
Plungers

Self-Clinching Plungers position and stop drawers.

CPN Series spring-loaded plunger assemblies can be used as positioning pins and locking stops on drawer slides and equipment consoles. Retractable CPR Series allows smooth slide operation. Plungers are made of carbon steel with bright nickel finish, and are pressed into outer frame for permanent attachment. Knurled head aids in gripping plunger to operate mechanism. Plunger pin snaps into mating...

Read More »
Hollow Metal Components can be formed into any shape.
Electroforming Services

Hollow Metal Components can be formed into any shape.

Thin-walled, hollow electroforms can be used as molds, coldshields, waveguides, precision tubing, precision nozzles, and other light weight, structurally rigid components. Electroforms are produced by electrodepositing thin layer of nickel on aluminum mandrel of any shape, then chemically dissolving mandrel to leave behind hollow, thin-walled metal form. Components can be made as small as 0.020...

Read More »
Collars and Couplings can be remachined by users.
Couplers and Couplings

Collars and Couplings can be remachined by users.

Solution Series let users create custom bore sizes and shapes. Remachineable shaft collars and couplings are supplied fully assembled with screws and include shim and pilot hole to let users bore or thread any size and configuration. Shaft collars come in 1 1/8 to 3 in. OD sizes, with smallest part having 1/4 in. pilot hole and 1/2 in. max ID, and largest part having 3/4 in. pilot hole and 2 in....

Read More »
Bearings suit space, weight, and load constraint applications.
Bearings

Bearings suit space, weight, and load constraint applications.

Thin-section ball bearings have bore diameter greater than 4 times radial cross section. Bore sizes range from 1 to 40 in. in 7 cross sections from 3/16 to 1 in. Bearings are also available in metric sizes and in radial, angular, and 4-point contact designs. User may specify seals, separators, and materials such as SAE 52100 steel, 440C stainless steel, and 17-4 stainless steel. Bearings are...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers