Mechanical Components and Assemblies

Gripping Rails with Clamps improve holding force.
Chucks and Collets

Gripping Rails with Clamps improve holding force.

Pitbull Gripping Rails, with built-in clamps, maintain parallelism on non-ferrous or ferrous parts. Their asymmetric design allows for precision tolerances. Pitbull Gripping Rails also improve holding force of magnetic chucks when used to hold difficult or irregularly shaped ferrous workpieces. They allow users to add extra steel blocking to increase resistance against sliding, and can hold large...

Read More »
Corrugated Containers provide bulk storage.
Containers

Corrugated Containers provide bulk storage.

Round-Corner Corrugated Containers are available in 32 x 40 x 24 in. and 40 x 48 x 24 in. sizes with 4,000 lb capacities. 4-sided units are made of heavy-duty steel with forklift accessibility on all sides. Standard designs come in 12 colors with 1/4 in. universal stacking legs. Containers are optionally available with corner posts that allow incorporation of gates, chutes or wire sides for...

Read More »
Air Coupler meets ISO standard 4414.
Couplings (Fittings)

Air Coupler meets ISO standard 4414.

Safe Air safety air coupler is rated to 232 psi and can be used to protect pneumatics, shop air applications, and other general air handling systems. 2-stage disconnection eliminates pop-off injuries. Stage 1 vents air pressure; stage 2 disconnects coupler. Coupler will not disconnect without manual vent-release step, and it cannot accidentally disconnect. Sizes are 1/4 to 1/2 in., with hose...

Read More »
Vacuum Pump Inlet traps contaminants.
Traps

Vacuum Pump Inlet traps contaminants.

Posi-Trap vacuum inlet trap has self-contained filter cartridge with positive sealing gaskets on both ends to prevent blow by and protect pump from contamination and oil back-streaming. Filter cartridges are available for abrasive and corrosive applications, including stainless steel, copper gauze, molecular sieve, Sodasorb, activated charcoal, and Polyro types. Traps come in 4 and 8 in. sizes in...

Read More »
Rack Guards are equipped with rubber bumpers.
Bumpers

Rack Guards are equipped with rubber bumpers.

Stuructural Rack Guards with rubber bumpers protect against damage to pallet racks, wall corners, fork trucks and pallet trucks. Constructed of 6 in. C channel with yellow powder-coat paint finish, rack guards are available from 12 in. to 24 in. high with a 4-1/2 in. opening size. Extruded rubber bumper fits on front of structural rack guard. Mounting hardware is available.

Read More »
Mold Dating Insert snaps in place.
Inserts

Mold Dating Insert snaps in place.

Indexable mold dating insert allows molders to make fast changes to day, month, year or work shift without completely removing insert from mold. Date changes can be made with turn of screwdriver, while snap-in-place indexable adjustment ensures insert remains fixed in correct date position during production. Mold dating inserts are available in diameters of 6, 8, 10, 12, 16 and 20mm. Inserts are...

Read More »
NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.
Hydraulic Cylinders

NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.

SS series requires no additional lubrication. Standard 250 psi pneumatic and optional 400 psi non-shock hydraulic cylinders are available with single or double rod end, oversized rods and 1-1/2 to 8 in. bore sizes. Non-rotating SS-NR series has 1-1/2 to 8 in. bores. SS-MSE/MSR versions are available in 2, 3 and 4-stage force multiplying models. Both 125 psi pneumatic and low-pressure hydraulic...

Read More »
Tie-rod Cylinder features a no-pinch point design.
Cylinders

Tie-rod Cylinder features a no-pinch point design.

Micro-Adjust NFPA Tie-Rod Cylinder features calibrated stop collar that allows for precise adjustment of extended stroke. Once adjusted, collar can be locked in place and offers precision scale and 0.001 in. calibration. Standard bore sizes range from 1-1/2 in. to 8 in. with up to 6 in. stroke and adjustment, and various standard NFPA mounts.

Read More »
Bellows Couplings quickly mount and dismount.
Shaft Couplings

Bellows Couplings quickly mount and dismount.

BK6 stainless steel press fit bellows couplings simultaneously compensate for axial, angular and lateral misalignment. When coupling halves are properly pretensioned, coupling is torsionally rigid with zero backlash. Bellows isolates shaft bearings of drive and driven elements from any side loading due to misalignment, thus extending service life. Applications include NC and CNC machine tools,...

Read More »
Reels stay together and keep products safe from damage.
Reels

Reels stay together and keep products safe from damage.

Dead Bolt reels feature stay-tight bolt assembly for safety. They are available in variety of sizes to accommodate nearly any type material, and come fully assembled or ready for assembly. Reels have tapered start holes and multiple tie-off holes to reduce material waste, and are available with optional water resistant cores. They can be stacked, making transport, material handling and storage...

Read More »

All Topics