Mechanical Components and Assemblies

Reach and Pick Clamps are powered by one external valve.
Power Clamps

Reach and Pick Clamps are powered by one external valve.

Series PS pneumatic slide and clamp units are available in 3 standard stroke lengths, adjustable from full stroke down to 1/2 in. stroke. Clamp jaws stay open until slide is fully extended, and remain closed to ensure panels are not dropped if air pressure is lost. Clamps can be rotated and spherically adjusted to match panel for accurate setup. Shock pads reduce noise and vibration at ends of...

Read More »
Wheels

Grinding Wheels fit bench grinding machines.

Premium Grain Grinding Wheels are available in 3 types. Offering high-friability grain, white aluminum-oxide wheel offers cool cutting and is used for light grinding of steels. Featuring tough but friable grains, pink aluminum-oxide wheel is for general-purpose use. Premium blue aluminum-oxide version offers friable grain with cool bond, suitable for materials 55RC and above. Wheels are available...

Read More »
Solid Plastic Balls replace plating tank covers.
Industrial Balls

Solid Plastic Balls replace plating tank covers.

Solid plastic balls float on surface of plating tank solutions in tight, naturally occurring pattern that seals up to 96% of heat and vapor inside plating tank, often eliminating need for tank covers in manual electroplating lines. Barrier prevents loss of potentially dangerous fluids during electroplating operations. Balls spread out to permit immersion and removal of cathodes, fasteners, pipes,...

Read More »
Static Neutralizing System is current-limited.
Miscellaneous Bars

Static Neutralizing System is current-limited.

PerforMAX automatically senses static neutralizing power needed to remove charges from surface, and adjusts ion output of static bar. System eliminates static charges when installed up to 10 in. from web surface (up to 20 in. on winders), and consists of control module and static bar. Range switch can be set where static bar is located less than or greater than 3 in. away from material. System...

Read More »
Grinding Wheels utilize durable bond posts.
Wheels

Grinding Wheels utilize durable bond posts.

Norton NorPor(TM) controlled-porosity, open-structure grinding wheels create more chip clearance, decreasing possibility of wheel loading and burning of part, in wet and dry grinding applications. They are available in 4 abrasive types: White 38A, Pink 25A, Ruby 48A, and Purple 3SGR; and 3 shapes: Type 1, Straight; Type 5, Recessed 1 Side; and Type 7, Recessed 2 Sides.

Read More »
Self-Aligning Pipe Couplings facilitate installation.
Couplings (Fittings)

Self-Aligning Pipe Couplings facilitate installation.

Tuf-Lok ring-grip couplings work in high-pressure applications up to 500 psig, or in full vacuum-rated systems. Couplings install easily on plain-end pipe, regardless of pipe wall. Couplings are self-grounding, vibration resistant, and leak-proof. No machining or grooving is required to maintain pipe integrity. Gasket materials are available to meet food-grade, high-temperature, and special...

Read More »
Roller Bearings eliminate need for loose housing fits.
Bearings

Roller Bearings eliminate need for loose housing fits.

SKF® single-row, silicon nitride, cylindrical roller bearings offer ceramic rollers, polymer cages, and tapered bores for preload/clearance adjustment. Bore sizes range from 40 to 120 mm. Design allows bearings to reach reference speed of 1.8 million Ndm when light-loaded and oil-air lubricated. Units are suited for machining and milling applications.

Read More »
Fuse Blocks provide Type 2 motor-starter protection.
Miscellaneous Blocks

Fuse Blocks provide Type 2 motor-starter protection.

Class CC fuse blocks are molded in self-extinguishing polyester fiberglass, and offer touch-safe operation with no load fuse disconnect lever. Rated at 30A and 600V, they accept wire sizes of 6-14 AWG. With CC fuses, units carry motor starting inrush currents, providing current limitation to protect against low and high level faults. Fuse blocks are UL listed, cUL certified and carry CE mark.

Read More »
Cartridge Bellows Seals provide efficient heat dissipation.
Bellows

Cartridge Bellows Seals provide efficient heat dissipation.

Ansitex seals, for ANSI rotating equipment, are available with elastomer or metal bellows, and come in both standard-bore and large-bore configurations. MFL metal bellows seal has operating temperature of -40 to +428 deg F and permits operation with high-solids content. Elastomer version has operating temperature of -4 to +284 deg F and is for use in water, beverage and light chemical...

Read More »
Collet Closer offers 3.5 in. capacity.
Closers

Collet Closer offers 3.5 in. capacity.

35J hydraulic collet closer operates at maximum of 5,000 psi for clamping in high-pressure applications. All-steel fixed length design keeps collet and part stable to maintain fixed height from part to part. Draw tube force is 1.8X line pressure. 35J has precision-bored holes in base for easy alignment. It can be used in multiple configurations using connector bushings to reduce both footprint...

Read More »

All Topics