Mechanical Components and Assemblies

Bridgeport’s Zinc Alloy Fittings Listed for Use with Aluminum EMT Means Contractors Can Install an EMT System that Won’t Rust

Bridgeport’s Zinc Alloy Fittings Listed for Use with Aluminum EMT Means Contractors Can Install an EMT System that Won’t Rust

STRATFORD, Conn. (April 19, 2017) – Electricians have often asked, “Why doesn’t an EMT manufacturer make corrosion-resistant tubing that won’t rust.” Now with aluminum EMT, contractors have their wish and can put away their rigid conduit threaders and reamers. Aluminum EMT is the perfect material choice for indoor or outdoor, damp, wet or exposed environments. With Bridgeport’s line...

Read More »
Fault Transmitter and Receiver Systems offer protection to distribution systems.

Fault Transmitter and Receiver Systems offer protection to distribution systems.

Available in SEL-FT50 transmitter and SEL-FR12 receiver models, Fault Transmitter and Receiver Systems eliminate unnecessary coordination delays. SEL-FT50 transmitter is installed on laterals, branches and main lines for broadcasting fault statuses via 860 or 900 MHz radio to receiver system. System consists of 12 line-powered SEL‑FT50 transmitters and 1 SEL-FR12 receiver that communicate fault...

Read More »
PSI-MODEM-SHDSL/SERIAL Extenders transmit data up to 20 km.

PSI-MODEM-SHDSL/SERIAL Extenders transmit data up to 20 km.

Extending data transmission up to 20 km across single twisted pair, coax or any copper wiring, PSI-MODEM-SHDSL/SERIAL Long Range Serial Extenders features two ports for customizing point-to-point, linear and star topology network structures. Units are used in E1/T1 circuits, RS232, RS422 and RS485, CCTV and CATV applications.

Read More »
Edge Protection Seal Profiles meet RoHS standards.

Edge Protection Seal Profiles meet RoHS standards.

Edge Protection Seal Profiles are available in GN 2180 and GN 2182 versions. Made from EPDM rubber or black acrylonitrile butadiene rubber in black for sizes 20.5 mm and 13 mm, GN 2180 version provides 25 ±5 Shore A sealing profile hardness and clamping profile hardness of 65 ±5 Shore A for EPDM rubber and 60 ±5 Shore A for NBR. Resistant to -40 to 90°C temperature range, version 2182 is made...

Read More »
MIXO Modular Inserts are resistant to mechanical stresses.

MIXO Modular Inserts are resistant to mechanical stresses.

Available with types of connections ranging from small signal connectors with low amp and voltage, up to 200 amp connectors, MIXO Modular Inserts are mounted side by side and locked into metallic frame. Each insert is designed to fit and lock into frame sizes ranging from 1 module to 12 modules. Housing signal, power, data and pneumatics contacts for conduction with up to 8 bars pressure...

Read More »
MS3 Inserts come with HiPIMS PVD coating.

MS3 Inserts come with HiPIMS PVD coating.

Suitable for machining unstable or thin-walled components and setups, MS3 Inserts are equipped with coolant jet guiding geometry. Featuring smooth surface and extremely sharp cutting edges, MS3 inserts are used for cutting high temperature alloys, titanium, cobalt-based and nickel-based alloys. Units are combined with WSM01 grade and secondary applications include steel, stainless steel and...

Read More »
TECHNOMET Enclosures are fitted with M4 earthing pillars.

TECHNOMET Enclosures are fitted with M4 earthing pillars.

Available in light gray or anthracite gray colors in eight sizes ranging from 2.95 x 8.85 x 7.87 in. to 5.90 x 13.78 x 10.83 in., TECHNOMET Enclosures are used for medical instruments, test and measurement, industrial control, peripherals and communication laboratory equipment. Designed with diecast front and rear bezels and snap-on trims, units can be inclined in 30° increments. Enclosures...

Read More »
CombiTac Light Housing is made of polyamide material.

CombiTac Light Housing is made of polyamide material.

Suitable for industrial test applications like automotive, aerospace and defense industries, CombiTac Light Housing feature centralized locking mechanism. Offering fast and secure connection and disconnection of test instruments, unit is designed in 0.6mm, 1mm, 1.5mm, 3mm and 6mm diameter contacts. With -40°C to +90°C operating temperature range, housing comes with 94 mm rail length and 100 000...

Read More »

SG-System 5 Receiver comes with Automatic Hand Shake technology.

Supporting combination of 24 IP or PSTN line cards, SG-System 5 Receiver features split reporting function for using both CPMs simultaneously to split data traffic over two paths. With multi-port automation capabilities, unit allows user for expanding automation outputs up to four. SG-System 5 outputs alarm events from PowerSeries Neo systems.

Read More »
CD50CE and TED50CE Dampers meet IECC standards.

CD50CE and TED50CE Dampers meet IECC standards.

Suitable for coastal or corrosive applications, CD50CE and TED50CE Dampers combine strength of stainless steel and protection of anodized aluminum frames. Designed with non-corrosive bearings and shake-proof linkage; airfoil blades for high-velocity heating, ventilation and air-conditioning (HVAC) systems, CD50CE meets AMCA standards. Eliminating thermal transfer, TED50CE damper features twin...

Read More »

All Topics