Mechanical Components and Assemblies

Plugs protect valve components during flushing/cleaning.
Plugs and Stoppers

Plugs protect valve components during flushing/cleaning.

O-Seal Flush Plugs isolate sections for cleaning or flushing by replacing valve cartridges at either end of affected area, preventing contamination to valves in remainder of system. Threaded openings in top of plugs permit connection to flushing pump. Valves inside area being cleaned or flushed can also be protected by removing those valve cartridges and replacing them with Flow-Thru Flush Plugs.

Read More »
Pipe Clamps suit light-duty applications.
Pipe Clamps

Pipe Clamps suit light-duty applications.

RLGU pipe clamps are made of lightweight aluminum-zinc with 12 mm band width in loop configuration. They are suitable for securing ducts, hoses, cables, and wiring harnesses, as well as pipes. For applications requiring dampening of noise and vibration, such as automotive and heavy truck, clamps can be ordered with rubber sleeve.

Read More »
Linear Slides provide smooth motion.
Slides

Linear Slides provide smooth motion.

Series SM Slide is available in 8, 12, 16, 25, and 32 mm bore sizes, with choice of 3 travel lengths. Slides provide smooth linear motion at 2x thrust of single bore cylinder. Optional porting through guide shafts allow saddle to move without flexing incoming air. All units are ready for 8 mm proximity switch. External mounting kits prevent flexing of electrical connectors. Slide is available in...

Read More »
Thermoplastic Bearing Housings are corrosion-resistant.
Bearings

Thermoplastic Bearing Housings are corrosion-resistant.

Dimensionally stable bearing housings are offered in pillow block and 2- and 4-bolt styles in 204, 205, 206, and 207 sizes. They can be equipped with metal or plastic insert bearings with bore sizes from Â-½ to 1½ in. (12 to 50 mm). Made of solid PBT thermoplastic polyester, they offer tensile strength of 17,300 psi. Able to be cleaned or hosed down with hot water, housings operate...

Read More »
Locating Pin LED Holders suit high shock/vibration applications.
Rectifiers and Diodes

Locating Pin LED Holders suit high shock/vibration applications.

H-LP Series holders, suitable for single, bi-level, and tri-level T-1 (3 mm) LED display applications, are manufactured from black, 94-VO rated nylon material. They provide PCB retention and uniform elevation during processing and handling, making them suitable for industrial environments. LEDs are perfectly aligned on equally spaced centers. With bifurcated locating pin, widths from 0.170 in.,...

Read More »
Enclosure protects safety light curtains.
Safety Equipment

Enclosure protects safety light curtains.

IP67 Enclosure resists many compounds and chemicals, and protects MS4600 series safety light curtains in washdown applications. Enclosure is constructed with acrylic tube, acetal ends, and stainless steel brackets, and is available in sizes from 10.4 to 82.4 in. Radial seal prevents fluids from coming in contact with safety light curtain. Enclosure has no ill effect on curtain's sensing range.

Read More »
Linear Slides suit harsh applications.
Slides

Linear Slides suit harsh applications.

Simplicity® heavy duty linear slides can be custom designed to fit specific needs. Self-lubricated bearings have Frelon® bearing surface that eliminates metal-to-metal contact and absorbs vibration and shock loads. They increase load capacity to over 5 times that of traditional rolling element bearings. Units have no mechanical components to become locked or to gall shafting. They...

Read More »
Custom-Color Dome Plugs provide seamless appearance.
Plugs and Stoppers

Custom-Color Dome Plugs provide seamless appearance.

Dome Plugs, made of 6/6 nylon, close unneeded drilled holes and knockout openings in motor housings and electrical cabinets. Available in custom colors or 9 standard colors, plugs offer impact-resistant convex tapered heads and through-dyed colors. Designed to snap into chassis up to Â-¼ in. thick, plugs are available in 27 sizes to fit openings from 3/16 to 6 in. in diameter. They carry...

Read More »
Conduit Bushings keep water and gas out.
Bushings

Conduit Bushings keep water and gas out.

Conduit Sealing Bushings stop water, dust, or gas under pressures up to 100 psi from entering electrical enclosures. Compact bushing is made of two PVC coated metal discs with one-piece neoprene sealing ring positioned between. Discs and ring are compressed together by stainless steel screws. Zinc plated, malleable iron locking collar is optional. Bushings are available for Schedule 40 rigid...

Read More »
Bellows Coupling features zero backlash.
Shaft Couplings

Bellows Coupling features zero backlash.

BK7 Bellow Coupling mounts to hollow bores with expanding tapered clamping element. Stainless steel bellow compensates for axial, angular, and lateral misalignment simultaneously. Coupling hubs are custom bored and accommodate shaft diameters from 0.12 to 2.36 in. Expanding hub accommodates bores from 0.31 to 2.36 in. Sizes are available for torque capacities ranging from 133 to 2,655 lb-in.

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers