Mechanical Components and Assemblies

Double Acting Cylinders lift up to 1,500 tons.
Hydraulic Cylinders

Double Acting Cylinders lift up to 1,500 tons.

RDA Series is available in variety of models with capacities of 10 through 1,500 tons. Cylinders have collar threads and base mounting holes, so they can be quickly fixtured virtually anywhere, indoors or outdoors. Double-acting design provides means for controlled retraction, while allowing cylinders to produce force in both advance and retract cycle. Internal surfaces are sealed for protection...

Read More »
Turning and Milling Inserts are PVD coated.
Inserts

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Read More »
Fuseblock facilitates installation in SMD automation.
Miscellaneous Blocks

Fuseblock facilitates installation in SMD automation.

OGN-SMD fuseblock can be surface mounted with 5x20 mm pre-loaded fuses, eliminating need for mounting block, fuses, and cover in separate steps. Heat-resistant UL 94 V-0 plastic withstands heat of vapor phase and reflow soldering. Fuseblock is rated to 10A/250V. Rated power acceptance at ambient air temperature, with or without reflow cover, is 4W; with transparent cover, 2.5W. Pin spacings of...

Read More »
Reach and Pick Clamps are powered by one external valve.
Power Clamps

Reach and Pick Clamps are powered by one external valve.

Series PS pneumatic slide and clamp units are available in 3 standard stroke lengths, adjustable from full stroke down to 1/2 in. stroke. Clamp jaws stay open until slide is fully extended, and remain closed to ensure panels are not dropped if air pressure is lost. Clamps can be rotated and spherically adjusted to match panel for accurate setup. Shock pads reduce noise and vibration at ends of...

Read More »
Wheels

Grinding Wheels fit bench grinding machines.

Premium Grain Grinding Wheels are available in 3 types. Offering high-friability grain, white aluminum-oxide wheel offers cool cutting and is used for light grinding of steels. Featuring tough but friable grains, pink aluminum-oxide wheel is for general-purpose use. Premium blue aluminum-oxide version offers friable grain with cool bond, suitable for materials 55RC and above. Wheels are available...

Read More »
Solid Plastic Balls replace plating tank covers.
Industrial Balls

Solid Plastic Balls replace plating tank covers.

Solid plastic balls float on surface of plating tank solutions in tight, naturally occurring pattern that seals up to 96% of heat and vapor inside plating tank, often eliminating need for tank covers in manual electroplating lines. Barrier prevents loss of potentially dangerous fluids during electroplating operations. Balls spread out to permit immersion and removal of cathodes, fasteners, pipes,...

Read More »
Static Neutralizing System is current-limited.
Miscellaneous Bars

Static Neutralizing System is current-limited.

PerforMAX automatically senses static neutralizing power needed to remove charges from surface, and adjusts ion output of static bar. System eliminates static charges when installed up to 10 in. from web surface (up to 20 in. on winders), and consists of control module and static bar. Range switch can be set where static bar is located less than or greater than 3 in. away from material. System...

Read More »
Grinding Wheels utilize durable bond posts.
Wheels

Grinding Wheels utilize durable bond posts.

Norton NorPor(TM) controlled-porosity, open-structure grinding wheels create more chip clearance, decreasing possibility of wheel loading and burning of part, in wet and dry grinding applications. They are available in 4 abrasive types: White 38A, Pink 25A, Ruby 48A, and Purple 3SGR; and 3 shapes: Type 1, Straight; Type 5, Recessed 1 Side; and Type 7, Recessed 2 Sides.

Read More »
Self-Aligning Pipe Couplings facilitate installation.
Couplings (Fittings)

Self-Aligning Pipe Couplings facilitate installation.

Tuf-Lok ring-grip couplings work in high-pressure applications up to 500 psig, or in full vacuum-rated systems. Couplings install easily on plain-end pipe, regardless of pipe wall. Couplings are self-grounding, vibration resistant, and leak-proof. No machining or grooving is required to maintain pipe integrity. Gasket materials are available to meet food-grade, high-temperature, and special...

Read More »
Roller Bearings eliminate need for loose housing fits.
Bearings

Roller Bearings eliminate need for loose housing fits.

SKF® single-row, silicon nitride, cylindrical roller bearings offer ceramic rollers, polymer cages, and tapered bores for preload/clearance adjustment. Bore sizes range from 40 to 120 mm. Design allows bearings to reach reference speed of 1.8 million Ndm when light-loaded and oil-air lubricated. Units are suited for machining and milling applications.

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics