Mechanical Components and Assemblies

Ball Bearings offer 3 types of seals.

Ball Bearings offer 3 types of seals.

Filled with GoldPlex-HP grease, SealMaster Bearings feature Tapered Lands bearing race design, which insures lubricant is directed to raceway. Offered in shaft sizes from 5/8 to 2 7/16 in., bearings are available with felt seal for protection against dry contaminants, spring-loaded lip seal for heavy contamination environments, or single lip seal for wet contaminant avoidance.

Read More »
Grinding Wheel combines zirconia with aluminum oxide.

Grinding Wheel combines zirconia with aluminum oxide.

Series ZA24R SG-PLUS® is offered in 5 sizes from 4-9 in. in diameter with .28 in. thickness. Blended-grain formula produces softer wheel that eliminates chatter and vibration common with hard wheels. Quick-change and threaded-hub styles are available for use on right-angle grinders.

Read More »
Couplings are used in flatbed scanning products.

Couplings are used in flatbed scanning products.

Manufactured from low-inertia grade 7075-T6 aluminum, Reli-a-Flex(TM) couplings have slit pattern with radial slits that gives products high torsional stiffness. Tested to 50 million cycles at rated torque, couplings are suited for high duty cycle applications such as printing and typesetting. Products are also suited for accurate positioning and responsive servo systems.

Read More »
Machined Springs are designed for precision equipment.

Machined Springs are designed for precision equipment.

Made of steel, stainless steel, aluminum, titanium, or high-strength plastics, machined springs provide linear and repeatable spring elements that fit within confined volume and remain in line when they stroke. With cross slot configuration, they do not tilt or rotate when exercised. Product design stays within fatigue limits and features inherently square ends. Single-piece construction can...

Read More »

Welding Enclosures provide freedom of movement.

To facilitate welding of stainless steel, titanium, and exotic or reactive metals, Argweld® Flexible Welding Enclosures enable users to manipulate workpiece and welding torch to work closer to workpiece. Product also allows precise monitoring and control of atmosphere around torch and weld pool. Available in diameters of 900-1,800 mm, enclosures are equipped with 2 pairs of glove ports and...

Read More »

Flange Gasket suits standard- and high-purity applications.

Manufactured to ANSI specifications with EPDM rubber and TFM (modified PTFE) covering exposed to fluid stream, chemical-resistant SYGEF® Gasket has self-centering design and is offered in sizes from -¾-10 in. Unit fits on outer surface of SYGEF flange adapter, allowing perfect alignment of gasket and creating tight, leak-free seal. Memory properties allow multiple installations.

Read More »

Steel Spring Wire retains mechanical properties.

Santex(TM) utilizes standard grade AISI 302 material that provides high fatigue resistance and low relaxation rate. Balanced addition of copper and aluminum makes spring material ductile, easy to form with good surface finish. Tensile strength and relaxation properties of wire can be increased with low-temperature heat treatment. Dimensions from 0.20-1.50 mm are available, with optional bright or...

Read More »
Ejection/Insertion Handle exerts forces higher than 200 N.

Ejection/Insertion Handle exerts forces higher than 200 N.

Addressing requirements of PICMG 3.0 specification, inject/eject hot swap handle for AdvancedTCA(TM) boards is ergonomically designed with intuitive open/close mechanism that separates switch actuation of hot-swap microswitch from inject/eject process. Dual-stage design permits board to shut down electronically before mechanical ejection process begins. Handle locks in open position, preventing...

Read More »
Dry Disconnect Couplings offer working pressure of 150 psi.

Dry Disconnect Couplings offer working pressure of 150 psi.

Available in sizes from 1-½-4 in., stainless steel Dry Disconnect Couplings are suited for transfer of chemicals, solvents, and fuels. They allow for connection and dis-connection of hoses and pipelines while eliminating accidental spillage and product loss. Built-in swivel allows operator to use push-and-turn action to connect and start product flow. Turn-and-pull action disconnects coupler and...

Read More »

Hose Clamps cannot be over or under tightened.

Self-Compensating Hose Clamps expand and contract with hose in response to temperature changes in application. Installed and removed using manual or pneumatic tools, clamps are suited for low-pressure applications in single-wire, double-wire, and constant tension band configurations. They also offer alternative to gluing hoses to manifolds, providing effective clamping without messy glues that...

Read More »
Sponsored

Vector Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector is helping ballplayers everywhere, see our video.

Read More »

All Topics