Mechanical Components and Assemblies

Sanitary Pulsation Dampeners suit biotech/food industries.

Sanitary Pulsation Dampeners suit biotech/food industries.

Available with polished and bead blasted 316L stainless steel surfaces, SENTRY Pulsation dampeners reduce pump pulsation, pipe vibration, and shaking up to 99%. FDA compliant products, suited for any application that requires sanitary pumping conditions, feature tri-clamp inlets and autoclave safe wetted parts. They are available from stock with pressure ratings to 80 psi and capacities from 4 cu...

Read More »
Ball Bearings suit ANSI standard centrifugal pumps.

Ball Bearings suit ANSI standard centrifugal pumps.

Series 5200C and 5300C double-row, angular contact ball bearings are made from bearing steel with low oxygen content. Rings are cold rolled blanks, heat-treated to provide dimensional stability up to 300°F. Bearings are engineered to ABEC-3 (P6) tolerances to reduce runout, allowing smooth operation at high speeds. They feature 1-piece, heat-treated, pressed-steel crown cages and inwardly...

Read More »
Rod Cylinder Slides come in 120 unique variations.

Rod Cylinder Slides come in 120 unique variations.

Tested and validated for max load at over 200 million linear inches of travel, RCS series includes choice of linear ball and composite bearing models in 5 bore sizes from 20-50 mm. Stroke lengths for each size are available in 1 in. increments up to 12 in. Products feature ISO style repairable cylinders with integral air cushions and dowel pin locating holes on tooling plate and slide body. On...

Read More »
Pull Hoist Ring has solid, forged center brace.

Pull Hoist Ring has solid, forged center brace.

Forged Center Pull lifting ring integrates solid center brace lift bail that eliminates possibility of spreading ring if misapplied. Ring pivots 180° and swivels 360°, which enables lifted items to be flipped or turned. With max capacities of 800-5,000 lb, ring is manufactured of alloy steel, features 5:1 strength factor, and is available in inch and metric versions.

Read More »
Air Amplifiers and How They Work
Sponsored

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Read More »
Linear Bearings and Shafting resist rust and contamination.

Linear Bearings and Shafting resist rust and contamination.

DryLin R plastic linear bearings consist of iglide® J polymer material that requires no lubrication or maintenance. Bearings are dimensionally interchangeable with standard, re-circulating ball bearings. DryLin S anodized aluminum shafting can be customized with flats, grooves, through-holes, or other modifications. Products suit extreme dirt conditions, underwater, food, and wash down...

Read More »
Shaft Locking Bushings are nickel-plated.

Shaft Locking Bushings are nickel-plated.

Posi-Lok® bushings enable solid connection between shaft and mounted devices, providing keyless option for locking into position gears, pulleys, sprockets, and other components in mechanical system. Protected against corrosion, products feature socket-head cap screws that, when tightened, allow inner and outer hub to move along mutual contact surfaces. Bushings handle torque from 52-5,576 lb-in....

Read More »
Indexing Plungers offer lock-out and non-lock-out versions.

Indexing Plungers offer lock-out and non-lock-out versions.

Available in metric sizes, Short Indexing Plungers have 303 SS threaded body and nut, nickel-plated SS plunger pin, and non-removable, nylon plastic knob with matte black finish. They are suited for applications where threaded body must be reduced to a minimum. Lock-out version can be used in situations where plunger has to stay in retracted position. Head of plunger features notches to prevent...

Read More »

Single-Channel UART is suited for portable applications.

With 16-Byte FIFO, TL16C550D single-channel universal asynchronous receiver/transmitter (UART) supports voltages from 5-2.5 V and data transfer rates from 1.0-1.5 Mbps. Product, housed in 32-pin QFN package, features programmable baud rate generator and auto flow control feature, which is comprised of auto-RTS and auto-CTS. Models TL16C550D and TL16C550DI accommodate up to 1.5 Mbps serial rate...

Read More »
Rubber Gaskets and Pads are resistant to jet fuel.

Rubber Gaskets and Pads are resistant to jet fuel.

Fluorosilicone Rubber Gaskets and Cushioning Pads are supplied in die-cut, water jet-cut, and custom-molded configurations. Fluorinated silicone rubber offers resilience, high/low temperature stability, and resistance to aging and degradation from sunlight and ozone. Compounds are available to provide 40, 50, 60, and 70 durometer molded sheets, gaskets, and custom components. They can be...

Read More »

All Topics