New Mechanical Components and Assemblies Products

Power Distribution Products deliver power over Ethernet.

PowerSense(TM) Midspan In-Line Hubs add power to spare pairs of network cable without disturbing transmission of data. Installed between existing Ethernet switch and LAN devices, products are offered in 24, 20, 10, and 1-port modular chassis designs that enable installation of additional modules as needed. Each module auto-detects device's power requirements and allows for transparent 10/100 Mbps...

TQFP to PQFP Adapter does not require board rework.

Aries 7484-117-18 adapter enables designers to replace 132-pin PQFP package IC with 144-pin TQFP without requiring board redesign. Top reroutes pinout of 144-pin device to make it compatible with 132-pin device footprint on existing PCBs. Gold-plated bump achieves SMT connection, providing rigid, non-slumping standoff for solder connection. Constructed of .062 in. thick, glass-filled FR-4...

Cartridge suits 2-component adhesives, epoxies, sealants.

Universal 2-component adhesive cartridge fits in standard caulk gun and is offered in 2:1 ratio pack. Cartridge stores one component of adhesive in front of the other and both are extruded through cartridge outlet into static mixer simultaneously. Unit maintains accurate volumetric ratio and eliminates bulging or expansion of cartridge. The 2:1 ratio contains 177 ml of usable material.

Ball Screws suit linear actuation applications.

Featuring internal recirculation system design, Inch Series precision ground ball screws can be used to lift, lower, pick-and-place, and perform positioning operations for computer-controlled equipment. Non-tube internal return design incorporates balls in each circuit removed from raceway and returned to it by solid metal deflector pins. Series ranges in size from 3/8-6 in. diameter with leads...

All About Cable Drag Chains

This ebook provides an in-depth overview into cable drag chains.

Steel Indexing Plunger is offered with threaded body.

Non lock-out type steel Indexing Plungers are available in inch and metric sizes. With steel, black oxide finish threaded body, plunger pin is steel, hardened and ground. Knob is matte black glass fiber-reinforced nylon plastic, while lock nut is steel with black oxide finish. Plungers offer 2 retracting strokes per plunger diameter, while nylon plastic hand knob has maximum heat resistance of...

Cantilever Slides are offered in 25 mm bore size.

Available in 6 bore sizes from 8-32 mm, Series SxL and SxH slides feature compact design with twin switch slots. Series SxH has precision-machined TC fluoropolymer composite bearings and comes in travel lengths to 8 in., while Series SxL features self-lubricating polymer bearings and comes in travel lengths to 3 in. Units are available in imperial and metric versions with internal and external...

Setting Blocks cushion and support glass.

Setting Blocks protect glass against vibration and shock from handling, shipping, and wind loads. Available with or without pressure-sensitive adhesive, blocks elevate and isolate insulating glass units from sash. Neoprene material makes blocks resilient, allowing glass unit to handle stressed conditions. Offering temperature range of -20 to 170-

Lamination Press Pads provide temperature stabilization.

PACOPRESS(TM) Press Pads control and retard heat delivered to press load. They also equalize pressure distributed across panel while laminating and pressing high- and low-pressure decorative and industrial plastic laminates. Able to be reused minimum of 20 times each, products are available in rolls up to 60 in. wide or as custom-cut sheets. Dust-free pads do not produce noxious odors during...

Grounding Coupling works with 5-15 hp NEMA motors.

Aegis(TM) Shaft Grounding Coupling prevents electrical damage to bearings of AC motors with variable frequency drives by safely passing harmful shaft current to ground. With Electron Transport Technology(TM), coupling provides virtual short between shaft and motor frame that keeps shaft current and voltage from building up. It provides cleanroom-quality bearing isolation with dust-proof seal that...

Liquid Injection Molding can handle large parts.

To support molded silicone rubber requirements that would typically exceed those for liquid injection molding (LIM) processing, LIM manufacturer offers shot size of 380 g and platen designs for injection molded gaskets up to 12 x 12 in. or 8 x 20 in. LIM silicone withstands temperatures from -100 to +450-

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.