Mechanical Components and Assemblies

Pillow Blocks have self-lubricating, aluminum bearings.

Pillow Blocks have self-lubricating, aluminum bearings.

Comprised of 54 pillow blocks, S61P_C and S61P_Z Series feature self-aligning, Frelon-®-lined anodized aluminum bearings. They are available in inch and metric sizes designed to fit shafts from .250-1.25 in. and 8-30 mm. Open and closed models with precision and standard tolerances are available. Wear rates are affected by surface finish, shaft hardness, length of travel, contamination, and...

Read More »
Extended Inner Ring Ball Bearings come plain or flanged.

Extended Inner Ring Ball Bearings come plain or flanged.

Made to exacting tolerances of 440C or DD stainless steel, ABEC 3 bearings, offered as A 7Y55 Series, come in no shield and double shield configurations. They address engineering problems where elimination of shims or other spacers is desirable in maintaining proper spacing of bearings away from large-diameter components. Comprised of 34 models, series offers ODs from .1562-.6250 in. and fits...

Read More »
Self-Clinching Pressbearings are self-aligning to

Self-Clinching Pressbearings are self-aligning to

Teflon-®-filled acetal bearings (A 7Z43 Series) and oil-impregnated sintered bronze bearings (A 7Z40 Series) are both self-lubricating. Offered in 6 sizes with IDs from .189-.501 in., A 7Z43 Series carries max radial loads from 28-320 lb and runs at max speeds from 3,300-13,000 rpm. Available in 6 sizes with bearing IDs from .126-.501 in., A 7Z40 Series offers max radial load ranges from 65-600...

Read More »

Air Cylinder features air bearing technology.

Offered in 10 strokes and 4 bore diameters of 9.5, 16, 24, and 32.5 mm, AIRPEL-AB provides repeatable driving or supporting forces from 2 g to 58 kg at pressures from 5-100 psi. Stainless steel piston, fitted to cylinder bore, creates true air bearing airflow effect around piston, preventing its contact with cylinder wall. Force Without Friction-® technology enables virtually unlimited piston...

Read More »
Slide features recirculating ball bearing guidance system.

Slide features recirculating ball bearing guidance system.

RZA Table-Top Linear Thruster Slide includes guidance system equipped with hardened and machined guide ways that offers friction free, silent motion. Longer bearings enable 10-150 mm strokes that maintains load capacity over full length of stroke. Five bore sizes with 4-8 strokes are available, based on 6-20 mm piston bore and range. Slide mounts and operates in any orientation, and features 1...

Read More »
Combined Linear Bearings smoothly move up to 41,000 lb.

Combined Linear Bearings smoothly move up to 41,000 lb.

Available in 11 sizes, MAX RAIL Combined Bearings feature maximum dynamic load ratings from 5,395-41,150 lbf radial and 2,248-18,434 lbf axial. Bearing rails are available in lengths to 19.7 ft. Protected from contaminants by steel labyrinth and rubber seals, bearings are supplied lubricated with grade 3 grease. Operating temperature range of 14-176-

Read More »

Alcoa Vino-Seal(TM) Wine Closure Gains Popularity with Wineries

Leal Vineyards Easily Integrates Alcoa's Glass Stopper into its Bottling Line; Nearly 500 Wineries Worldwide Use the Innovative Closure NEW YORK--(BUSINESS WIRE)--Aug. 2, 2006--The Alcoa Vino-Seal(TM) wine closure has grown in popularity with winemakers worldwide. Since the glass-on-glass stopper was introduced two years ago in Europe under the Vino-Lok(TM) name, it has been selected by nearly...

Read More »
Cyl-Tec, Inc. Aluminum Cylinders Ideal for Medical Oxygen Needs

Cyl-Tec, Inc. Aluminum Cylinders Ideal for Medical Oxygen Needs

Aurora, IL - Cyl-Tec, Inc. now offers aluminum gas cylinders for medical O2 applications. The aluminum cylinders are as much as 50% lighter than traditional steel cylinders, making them easier to carry and handle. The medical O2 aluminum cylinders are suitable for use by emergency medical personnel, as well as for home healthcare, hospitals, nursing homes and other settings that are equipped to...

Read More »
Coin Cell Retainer suits high-density PCB packaging.

Coin Cell Retainer suits high-density PCB packaging.

Intended for automated placement in SMT applications, top-loaded Coin Cell Retainer has solder tails located outside insulating material to support vision systems and other inspection systems. Engineered with spring tension dynamics, device assures low contact resistance, features clearly marked polarity, and is also available for through-hole use. Retainer accepts 11.6 mm coin cell lithium...

Read More »

Needle enables safe drug reconstitution and transfer.

Measuring 4 mm long, CyTwo-Fer(TM) Needle has hub design that allows for vented vial access and non-vented IV bag access. It is designed for use with smaller vials, permitting users to draw up reconstituted drug trapped in vial neck. Without changing needles, product allows bag and vial access in one procedure. It features 16G stainless steel cannula with tapered Huber point. Also included, 0.2...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics