Mechanical Components and Assemblies

Spring Plunger is designed to facilitate installation.

Spring Plunger is designed to facilitate installation.

Available in 1/8, 3/16, -¼, 5/16, 3/8, and -½ in. dia and 2 spring pressures per diameter, Press-Thru(TM) Spring Plunger comes in either steel or stainless steel body with 440 stainless or Delrin-® nose. Products do not have flange on nose end, allowing for insertion into work piece from top or bottom, front or back. For installation, user presses body so plunger end is flush with surface....

Read More »
NILOS® Steel-Disk Seals Prevent Contamination and Lubricant Leakage

NILOS® Steel-Disk Seals Prevent Contamination and Lubricant Leakage

NILOS® steel-disk seals for grease-lubricated roller bearings can provide superior protection against contaminants in mining equipment exposed to extreme levels of dirt, dust, and debris. They can further prevent leakage of lubricant and contribute to optimized bearing service life in a wide range of applications, including idlers, crushers, and conveyor rollers, among others. Their non-contact,...

Read More »

Pumpcoat Provides Long-term Solution to High Wear Problem with Specialty Ash Parts

Most Power Plants run on coal, oil, gas or trash/biomass, and in burning the fuel, create Ash as a by-product. Ash often creates concern for the people running the plant, as it is highly abrasive and wears down everything it comes into contact with. Most parts in Ash-handling systems don't stand a chance. Mike O'Leary, Sales Director of Pumpcoat, Inc. has been working with power plants for over...

Read More »
Pres-On Expands Die Cutting Capabilities to Provide More Tape & Gasket Solutions to OEMs

Pres-On Expands Die Cutting Capabilities to Provide More Tape & Gasket Solutions to OEMs

ADDISON, IL, December 14, 2006 - Pres-On, a leading supplier and innovator in adhesive products, announced today it has expanded its in-house die-cutting capabilities of gaskets and tapes used by OEMs in the assembly of furniture, vehicles, consumer electronics and countless other products. Designed to improve assembly time and provide cost savings for OEMs, Pres-On tapes and gaskets can be die...

Read More »

Kaba Lodging Systems and Omnia Industries Partner to Offer New Designer Levers

Kaba Lodging Systems and Omnia Industries Partner to Offer New Designer Levers New York City - November 12, 2006 - Kaba Lodging Systems, a worldwide leader in access control solutions announced today at the International Hotel/Motel & Restaurant Show (IH/M&RS) its partnership with Omnia Industries, a leading designer and manufacturer of architectural hardware and decorative levers. A choice of 18...

Read More »

Ceradyne, Inc. Signs Agreement with Alcan Inc. to Provide Nuclear Waste Containment Systems

COSTA MESA, Calif. & SAGUENAY, Quebec--June 8, 2006--Ceradyne, Inc. (Company) (Nasdaq:CRDN) and Alcan Inc. (NYSE:AL) (TSX:AL) announced today that they have signed a multi-year agreement to fabricate and distribute a nuclear shielding boron carbide/aluminum Metal Matrix Composite (MMC). Alcan's Dubuc Works and Ceradyne's recently formed subsidiary, Ceradyne Canada, will cooperate to produce...

Read More »

XTech Launches AMC Faceplate Assemblies

A significant addition is made to XTech's growing family of ATCA (Advanced Telecommunications Architecture) products. RANDOLPH, Mass. - Advancing its tradition of offering superior-quality circuit board mounting solutions to the telecommunications and electronics industries, XTech, with headquarters in Randolph, Mass. and new facility in Xiamen, China today announced a significant addition to its...

Read More »
Electronic Foot Pedals suit diesel and gas-powered vehicles.

Electronic Foot Pedals suit diesel and gas-powered vehicles.

Floor-mounted TCF Series features non-contact angular displacement sensor, which is available with wide range of signal outputs and is compatible with most electronic engine management systems. Typical applications include trucks and buses as well as construction, farm, and material handling equipment. Pedal assemblies can be designed to meet specific customer requirements.

Read More »
Z-Flex Designs New Z-Vent(TM) Drain-Backflow Adapter for Takagi On-Demand Water Heaters

Z-Flex Designs New Z-Vent(TM) Drain-Backflow Adapter for Takagi On-Demand Water Heaters

Etobicoke, Ontario - Z-Flex has designed a brand new drain-backflow adapter for Takagi on-demand water heaters. This new, all-in-one part incorporates individual design improvements made with multiple parts through extensive product research and development and has patent(s) pending. As OEM supplier to Takagi for the venting of their innovative and industry-leading on-demand water heaters, Z-Flex...

Read More »

RoHS-Compliant EMI Gaskets are tested to 500,000 cycles.

Recyclable Clean Copper products are copper-based shielding gaskets that offer beryllium-free EMI shielding solution for use in slotted applications. Stability and tensile strength provide optimal thermal and electrical conductivity as well as elasticity. Suitable for grounding and shielding applications at rates comparable to metal EMI shields, products are RoHS-compliant and alleviate...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics