Mechanical Components and Assemblies

Suspended Foot Pedals feature electronic management systems.
Pedals

Suspended Foot Pedals feature electronic management systems.

Offered in 3 models, TCS Series features non-contact angular displacement sensor that can be incorporated into virtually any type of vehicle. Sensor is available in wide range of signal outputs and is compatible with most electronic engine management systems. Typical applications for pedals include trucks and buses as well as construction, farm, and material handling equipment.

Read More »
Rectifiers and Diodes

Perkinelmer to Showcase Optoelectronics Technologies at LASER 2007 in Munich, Germany

Specialty Lighting Solutions for Laser-pumping, Aesthetics, Automotive, Laser range-finding and other applications on display in Booth B1.309 Munich, Germany - June 18, 2007 - PerkinElmer, a global technology leader in digital imaging, specialty lighting and optical detection technologies, will showcase its Photonics Flash, LED, and Sensor Solutions for a host of laser applications including...

Read More »
Glass Microspheres are traceable to NIST standards.
Industrial Balls

Glass Microspheres are traceable to NIST standards.

Comprised of single size glass beads greater than 1 mm in diameter, Monodisperse Standards have narrow particle size distributions and come in sets of 5 single shot bottles from 0.1-1.0 g. These reference calibration beads come with NIST-traceable test certificate and suit application areas such as pharmaceuticals, foodstuffs, polymers, and specialty chemicals.

Read More »
Tubing Clamps come in three distinct styles.
Hose Clamps

Tubing Clamps come in three distinct styles.

Offered in stainless steel and zinc plated carbon steel, Oetiker® ear type clamps breathe to adapt to expansion and contraction while remaining secure and tamper-proof. Stainless steel worm gear clamps, also available, install by screwdriver tightening. Lined version is available for use with very soft tubing. Manufactured from UL-listed black nylon 6-6, Kwik Clamps(TM) will not rust or...

Read More »
Split Seals are engineered for pumps and mixers.
Mechanical Seals

Split Seals are engineered for pumps and mixers.

Model PSS III pressurized split seal offers 300 psig vacuum pressure capability in normal operating conditions and successfully operates after experiencing excursions up to 450 psig. Model features 0.060 in. TIR radial shaft run out capability and has allowable temperature range of 0-250°F. Series comes pre-assembled into drive and gland halves, and is suited for use in paper mills,...

Read More »
Rod Lock Cylinders suit NFPA applications.
Cylinders

Rod Lock Cylinders suit NFPA applications.

Designed for clamping, load holding, or E-stop applications, Series 3MA and 4MA cylinders hold loads in static condition while air pressure is removed from system. Available in 7 bore sizes ranging from 1.125-5.00 in., low friction 3MA cylinders have maximum operating air pressure of 250 psi and operating temperature range of -10 to +165°F. Intended for customization, 4MA units feature -50...

Read More »
Hydraulic Cylinders

Mill-Duty Cylinders suit tough primary-metals environments.

Offered as Vickers(TM) AM/MM/WM and Hydro-Line® AM/MM/SM Series, mill-duty cylinders feature 2-16 in. size range, hydraulic operating pressures of 2,000 and 3,000 psi, and pneumatic operating pressure of 250 psi. Units have standard stroke lengths up to 8 ft for various primary metals applications such as furnaces, casters, smelters, rolling mills, and stackers/reclaimers. Products also...

Read More »
Plate Lifter features 3-hook configuration.
Handling Equipment

Plate Lifter features 3-hook configuration.

Able to handle thick plates one at a time, Strong-Bac® Plate Lifter is suited for loading or unloading large, bulky plates from trucks, stock, or flame-cut tables. Three hook configuration facilitates adjustment and handling of the plate. Once positioned over load and hooks are engaged, system can be operated. It is available in 5 or 10 ton capacities and conforms to ASME standards.

Read More »
Blocks enable mounting of T-slotted aluminum profiles.
Miscellaneous Blocks

Blocks enable mounting of T-slotted aluminum profiles.

Compatible with 6, 10, and 25 Series T-slotted aluminum profiles, Quarter-Turn Panel Mount Blocks come with either Â-¼-20 or M6 vertically adjustable square nuts inserted in fiberglass-reinforced nylon body. Spacers are molded of same material in thicknesses of 2, 3, and 5 mm, enabling use of various panel thicknesses and locations. Blocks facilitate mounting of plastic panels in T-slotted...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics