Mechanical Components and Assemblies

Beam Clamps facilitate installation of threaded rod on I-beams.

Available in -¼-20, 3/8-16, and -½-13 thread sizes, Kindorf-® Fast Set Beam Clamps are load rated at 250, 600, and 1,000 lb, respectively, and require no tools for installation. Once clamp is slid onto I-beam flange and secured by hand, threaded rod can be screwed through clamp and tightened, thereby locking tongue of clamp against I-beam for extra security.

Read More »
Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces and Pumps - They Position and Clamp Workpieces

Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces and Pumps - They Position and Clamp Workpieces

Minneapolis, Minnesota: Kurt announces the introduction of a wide range of Hydraulic Swing Clamps, Valves and Pumps for clamping workpieces in a high production machining environment. This new Kurt product line provides a wide range of Swing Clamps and accessory options for configuring the right workholding system for a single machining center or a multi-pallet cell with multiple machines. This...

Read More »
Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces for High Precision Machining Repeatability

Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces for High Precision Machining Repeatability

Minneapolis, Minnesota: Kurt announces the introduction of a wide range of Hydraulic Swing Clamps, Valves and Pumps for clamping workpieces in a high production machining environment. This new Kurt product line provides a wide range of Swing Clamps and accessory options for configuring the right workholding system for a single machining center or a multi-pallet cell with multiple machines. This...

Read More »
Matrox Extio Units Optimize Workstation Performance and Working Conditions in Multi-Utility Control Room

Matrox Extio Units Optimize Workstation Performance and Working Conditions in Multi-Utility Control Room

Matrox KVM extenders remotely drive 19 multi - display operator stations while alleviating system noise, heat, and dirt concerns Montreal, Canada - Matrox Graphics today announced that Italian multi-utility company A2A Reti Elettriche Spa has selected Matrox Extio Series KVM extenders to eliminate system heat, noise, and dirt issues by remotely driving 19 dual-and quad-monitor workstations in...

Read More »

AirLoc Damping Pads Take the Thump Out of a Bliss C-35 Press!

Charter Automotive, headquartered in Milwaukee, is a world class provider of engineered components and assemblies specializing in engine, transmission and driveline applications. Engineering for Charter, contacted the AirLoc Midwest Regional Manager to help with a small Bliss press which was transmitting a noticeable floor disturbance during normal punching operations. AirLoc worked closely with...

Read More »
DSTI Will Showcase Fluid Rotary Technology at PACK EXPO 2011

DSTI Will Showcase Fluid Rotary Technology at PACK EXPO 2011

MINNEAPOLIS, Minn. - DSTI will showcase its fluid rotary unions and swivel joints for packaging and processing applications at PACK EXPO 2011 in Las Vegas, Nevada. PACK EXPO, produced by PMMI, is North America's largest packaging and processing marketplace with more than 1,300 exhibitors signed on for 2011 to showcase their products and processes. Learn more at www.packexpo.com With CIP...

Read More »

Great Lakes Engineering Licenses DEK VectorGuard® Technology

Great Lakes Engineering Licenses DEK VectorGuard-® Technology Recognizing the benefits of DEK's award-winning VectorGuard-® stencil technology, Great Lakes Engineering today announced that it has signed a licensing agreement with DEK which will enable the Maple Grove, Minnesota-based stencil manufacturer to supply VectorGuard products to its customer base. VectorGuard is an incredibly unique...

Read More »
L-com Introduces Plug-and-Play VGA Splitters and Extender

L-com Introduces Plug-and-Play VGA Splitters and Extender

NORTH ANDOVER, MA - July 28, 2011 - L-com, Inc., a global leader in the manufacture of wired and wireless connectivity products, has introduced a new line of VGA splitters and a UTP VGA extender. L-com's LCVS series of VGA video splitters are ideal for distributing VGA video signals from one source to multiple displays. These plug and play video splitters can be installed in seconds and provide...

Read More »
Assure Safe Spot Cooling Operations with EXAIR's CE Compliant Vortex Tubes

Assure Safe Spot Cooling Operations with EXAIR's CE Compliant Vortex Tubes

EXAIR's Vortex Tubes have always provided a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Now, independent laboratory tests certify that EXAIR's Vortex Tubes have also met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark. By taking advantage of the characteristics of rapidly rotating...

Read More »
Terminal Products for all Automotive Applications

Terminal Products for all Automotive Applications

A full line of standard OEM spark plug and distributor terminals, including rubber insulation boots, battery terminals (ROHS compliant), or custom fabricated terminals and electrical components for virtually any automotive application are available from ETCO Incorporated of Warwick, Rhode Island U.S.A. ETCO Automotive Terminal Products include standard spark plug and distributor terminals,...

Read More »

All Topics