Mechanical Components and Assemblies

Weldable Shaft Collars include couplings for custom solutions.
Shaft Couplings

Weldable Shaft Collars include couplings for custom solutions.

Machined from ANSI 1018 steel, Stafford Weldable Shaft Collars and Couplings can be machined and welded by user for creating custom drive, motion control, and structural design solutions. Styles include one- and 2-piece collars in ¼–6 in. ID sizes and couplings in ¼–2 in. ID sizes. Specials are also available in larger sizes and can incorporate custom modifications such as threaded...

Read More »
Miscellaneous Seals

Dock Leveler Sealing System stops energy loss.

Using triangular shaped seal assemblies combined with 2-ply rear hinge seal to restrict air flow, ENERGY GUARD™ Retrofit Kit by Serco® provides perimeter seal along sides and rear of dock leveler, eliminating transfer of heat energy in and out of facility. Triangular shape allows seals to pivot with motion of dock leveler. Available to fit dock leveler widths of 6, 6 Â-½, and 7 ft...

Read More »
Magnets

Calnetix Technologies Adds Another Magnetic Bearings Patent to Its Portfolio

Cerritos, Calif.Â- - Calnetix Technologies, a pioneer in developing and manufacturing high-speed permanent magnet motor generators, power electronics and magnetic bearings for a variety of applications and industries, recently received a patent on the company’s radial magnetic bearing invention.  It is the fifth patent spearheaded by Principal Research Engineer Alexei Filatov....

Read More »
Nordson ASYMTEK Demonstrates NexJet Jetting System with One-Piece Genius Jet Cartridge at IPC APEX Booth 3115
Hose

Nordson ASYMTEK Demonstrates NexJet Jetting System with One-Piece Genius Jet Cartridge at IPC APEX Booth 3115

System improves precision, speed, throughput,Â- and reduces cost of ownership Carlsbad, CA, USA  - Nordson ASYMTEK, a leader in fluid dispensing, coating, and jetting technologies, will demonstrate its new, patent-pending, NexJet™ jetting system, with the one-piece Genius™ Jet Cartridge, at IPC APEX 2013 booth #3115. The Genius Jet Cartridge is the only system part that...

Read More »
Rotomolding Company to Exhibit at 2013 ICCFA Conference
Urns

Rotomolding Company to Exhibit at 2013 ICCFA Conference

Rotational molding company, Granger Plastics, is set to exhibit at the ICCFA conference in Tampa, FL April 10-13, 2013. Granger originally debuted ForeverSafe Products, a line of cemetery vases and cremation urns, in September 2012 at the Catholic Cemetery Conference in Washington, DC to a very receptive response by many in the industry. This will be the product lines first showing at the ICCFA...

Read More »
Data Storage Equipment

Sony LTO Ultrium 6 Data Cartridge Awarded Qualification from LTO Technology Provider Companies

New Cartridge Delivers 2.5TB Recording Capacity and 160 MB/s Maximum Data Transfer Rate PARK RIDGE, N.J. - Sony's latest Linear Tape-Open tape cartridge, the LTO Ultrium 6 data cartridge has been approved and qualified by the LTO Technology Provider Companies, a consortium of technology companies that includes HP, IBM Corporation and Quantum Corp. The sixth-generation cartridge is designed to...

Read More »
AC Power Strip Outlet Module supports USB communications.
Electrical Connectors

AC Power Strip Outlet Module supports USB communications.

Rated 8 A @ 240 Vac, JSB2871 series provides DPST relay with output that feeds AC power outlet. Wire connection to relay module is made with on-board screw type terminals, and any standard AC line cord plugged into outlet can be controlled by USB commands. Replaceable fuse protects relay and AC line, and options for relay board include AC detection of either input or output power. SFF module...

Read More »
Plain Bearings (Bushings)

Custom Bearings run submerged in low-viscosity liquids.

Able to run in applications from -400 to +1,000°F, custom carbon-graphite bearings handle liquids such asÂ- water, gasoline, hot oil, solvents, strong chemicals, molten metals, liquefied gases, and beverages. Bearings are available in 150+ grades of self-polishing and dimensionally stable carbon-graphite and can be provided to customer print or customer approved dimensions and...

Read More »
Threaded Tube Inserts offer thread sizes from 3/8-16 to ¾-10.
Inserts

Threaded Tube Inserts offer thread sizes from 3/8-16 to ¾-10.

Available in tube sizes from 1.5–2 in., SQH Square Heavy Duty Series and RDH Round Heavy Duty Series are made from black glass-filled nylon with brass threaded insert, making them suitable for indoor and outdoor use. Corrosion-resistant units feature static load rating up to 2,000 lb. For tiltingÂ- and swiveling capability, SQH and RDH can be used in conjunction with AFM Series...

Read More »
Heat Shrink Tubing offers 2:1 and 3:1 shrink ratios.
Heat Shrink Tubing

Heat Shrink Tubing offers 2:1 and 3:1 shrink ratios.

Made of crosslinked polyolefin,Â- HST Series protects inline components, disconnect terminals, and splices. Products are UL approved, RoHS-compliant, and available in variety of pre-cut lengths as well as mini and standard roll lengths. Six color options facilitate coding of wires, cables, terminals, and components. To provide both insulation and sealing on applications such...

Read More »

All Topics